飞机过度/不足转向地面转弯操纵特性分析

为分析飞机着陆滑跑过程中的过度/不足转向特性,提高前轮转弯系统的操纵性能,提出了一种具有时变参数的飞机转弯系统的低阶等价模型,并结合系统稳定性的分析与飞行数据,可知在飞机着陆滑跑过程中的某个速度范围内,由于系统偏航角速度命令带宽衰减至零值附近,飞机的过度/不足转向特性曲线十分接近临界稳定速度边界,引起操纵特性严重恶化,由此提出了一种采用偏航角速度的局部负反馈来调节系统带宽的自校正增稳设计.分析与仿真结果说明:该模型能够解决使用高阶模型对飞机该项性能分析复杂的问题,可以作为高阶复杂模型分析的一种补充,且提出的增稳方法能使系统偏航角速度命令带宽保持在期望范围内,改善脚蹬操纵的敏感性,提高系统的操纵性能.      

飞行弹丸红外特性的地面模拟试验

设计并建立了用于飞行弹丸中段飞行状态实验室模拟的试验系统,测量获得了飞行弹丸的红外辐射特性.基于传热与辐射理论,分析了相关参数对实验结果的影响,获得飞行弹丸在一定飞行状态下的辐射特性变化规律.目标的初始温度和辐照条件是影响目标辐射特性的主要因素,自旋状态影响辐射特性的空间分布.试验测量与数值仿真和理论分析结果均具有很好的一致性,证明在实验室开展飞行弹丸的红外辐射特性模拟试验具有可行性.     

电缆网阻值测试仪的设计与实现

随着单片机技术的发展及其在测试领域的广泛应用,早期采用的人工作业对电缆网性能测定的方法已经不再适用。本文介绍了一种基于单片机技术的电缆网阻值测试仪。从电缆网阻值测试仪的功能与设计要求出发,阐述了总体设计方案,说明了该套设备的工作原理,描述了系统的硬件实施和软件设计,并对整套设备进行了实验验证。结果表明：设备满足了用户要求,提高了测试效率。     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.     

On the observability of Mars entry navigation using radiometric measurements

A thorough observability analysis of the Mars entry navigation using radiometric measurements from ground based beacons is performed. This analysis involves the evaluation of the Fisher information matrix which is derived from the maximum likelihood estimation. A series of navigation cases with multiple beacons are investigated, and both range and range-rate measurements are considered. The determinant of Fisher information matrix is used to quantify the observability of navigation system, while the trace of Fisher information matrix is used to determine the lower-bound of estimation errors. For one and two beacon cases, the navigation system is unobservable. However, the eigenvectors of Fisher information matrix give the observable and unobservable component. When three or more beacon measurements are employed, the states of entry vehicle become observable. Some valuable analytic conclusions on the relationship between the geometric configuration of beacons and observability are obtained consequently. Finally, simulation results from two navigation examples indicate that our effort is useful for understanding and assessing the observability of the Mars entry navigation using radiometric measurements.     

水声管中传感器灵敏度标定的新方法

对声管双传感器传递函数法测量中由传感器灵敏度差异带来的误差进行了分析.根据已知确定界面反射系数可确定传感器传递函数,并可求其灵敏度比的原理提出了声管中双传感器灵敏度标定的新方法.空气声管中对刚背衬下已知传递函数进行了实验验证;水声管中气体背衬时,分别在常压和打压情况下对新方法进行了实验验证,说明了新方法的可靠性,克服了水声管中无法用交换传感器获得灵敏度补偿的困难.     

富氢/富氧燃气同轴直流喷嘴燃烧过程数值模拟

为研究全流量补燃FFSC(Full Flow Staged Combustion)循环发动机气-气喷注器性能,以气氢/气氧(GH2/GO2)预燃室提供的758K富氢燃气和676K富氧燃气为推进剂对同轴直流喷嘴燃烧流场进行了数值模拟.考察了相同燃烧室结构、流量、入口燃气温度条件下,富氧燃气压降、富氢燃气和富氧燃气的速度比、氧喷嘴厚度和氧喷嘴缩进变化对燃烧性能的影响,获得了4个参数的影响规律.数值模拟结果对燃气气-气喷注器结构设计有参考价值.     

基于决策级数据融合的可靠性综合验证方法

可靠性验证试验是检验产品的可靠性水平是否达到要求而进行的试验,是一项重要的可靠性活动.价格昂贵或者可靠性水平较高的设备,按照经典的抽样方案进行试验,时间和费用几乎是不能承受的.为了解决上述实际问题,针对成功率的抽样检验方案,利用证据理论方法,研究了基于研制试验数据、可靠性评估结果和专家信息的基本可信度分配函数的构建方法,并给出了基于决策级数据融合的可靠性综合验证试验模型.同时,对可靠性综合验证模型的性质进行了讨论,确定了可靠性综合验证试验方案的存在性,并提出了方案的选取原则.模型可以广泛地利用研制信息,并可以统一给出基于不同分布类型和不同信息的可靠性综合验证试验方案.通过示例表明该方法可以利用各种研制信息,达到减少可靠性验证试验样本的目的.     

钛合金蜂窝结构蒙皮脱焊缺陷锁相红外热成像检测

蒙皮脱焊是钛合金蜂窝结构制造和服役过程中最常见的缺陷类型。受钛合金材料热导率低的影响,钛合金蜂窝结构中蒙皮越厚,红外热成像检测时其表面反映脱焊缺陷信息的温度差异信号就越弱,检测难度就越大。针对这一问题,研究了不同蒙皮厚度钛合金蜂窝结构锁相红外热成像检测时调制频率的选取范围。建立了钛合金蜂窝结构锁相红外热成像检测有限元模型,分析了蒙皮表面温度在调制热流作用下的变化历程,基于相关算法提取了蒙皮表面对应缺陷区和非缺陷区的相位差,分析了相位差与调制频率、蒙皮厚度的关系。利用锁相红外热成像检测系统对预制脱焊缺陷的蜂窝试件进行了实验研究,获得了缺陷区与非缺陷区信号相位差与调制频率的关系。研究结果表明,针对蒙皮厚度为0.6~2.0 mm的钛合金蜂窝结构,采用0.04~0.10 Hz的调制频率能够获得最佳检测结果。研究结果为钛合金蜂窝结构实际检测提供了工艺指导。      

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.