纳米银膏与微米银膏烧结连接对比

用粒径20~80nm的纳米银膏和粒径1~3μm的微米银膏进行了烧结连接镀银铜块的对比实验.借助热/力物理模拟试验机Gleeble 1500D对接头剪切强度进行了测定.用扫描电镜及能谱分析仪对接头的微观组织进行了观察和分析.结果表明:在相同的连接条件下纳米银膏烧结连接的剪切强度明显高于微米银膏烧结连接的剪切强度.接头断口和显微组织分析表明,在相同条件下,纳米银膏烧结接头组织的质密性好于微米银膏烧结接头的组织质密性.在微米银连接接头中,由于Cu块-烧结银层间的界面处存在裂纹,其剪切强度较低.     

基于粒子滤波和不确定图的动态系统诊断方法

在动态系统基于模型诊断中,状态空间大小与元件个数、时间是双指数关系.K-Best枚举方法每个时刻只考虑K个可能性最大的状态,有效减小了枚举空间,但当系统复杂庞大或诊断周期长时,状态更新仍是一项巨大工程.提出一种结合粒子滤波和不确定图的动态系统诊断方法PF_LUG,利用粒子在状态空间的分布近似其概率,并用不确定图标签的反向匹配代替传统的正向轨迹枚举.算法有效解决了由时间导致的计算量增长问题,使时间对复杂度的影响由指数运算降为乘积运算.仿真结果表明该算法的运行时间相对诊断周期线性增长,比K-Best枚举有明显优势.     

星载可展开天线热振动数值分析

根据非耦合动力学理论及有限元方法,研究分析了星载可展开天线的热振动。利用半正弦波温度冲击模拟热动力荷载,对天线典型节点的热振动位移和应力以及形面精度进行了数值分析。研究表明,急剧变化的温度荷载将导致该天线结构发生热振动,热振动响应明显大于静力学响应。     

金属橡胶刚度阻尼模型理论分析

针对金属橡胶构件加工工艺特点,以金属丝螺旋卷为金属橡胶构件的微元体结构.根据金属丝螺旋卷之间不同的接触状态,以圆柱压缩螺旋弹簧理论为基础,基于材料力学和库仑摩擦模型,考虑摩擦力的影响,建立金属丝螺旋卷微元体结构的力学模型.通过对微元体接触状态和接触对数目的分析,从理论上解释了金属橡胶的非线性刚度及阻尼产生的机理.该模型从细观的金属丝螺旋卷微元体上描述了金属橡胶迟滞特性的物理本质,为预测和分析金属橡胶的刚度、阻尼特性和设计金属橡胶构件提供了有效的理论基础.      

飞机过度/不足转向地面转弯操纵特性分析

为分析飞机着陆滑跑过程中的过度/不足转向特性,提高前轮转弯系统的操纵性能,提出了一种具有时变参数的飞机转弯系统的低阶等价模型,并结合系统稳定性的分析与飞行数据,可知在飞机着陆滑跑过程中的某个速度范围内,由于系统偏航角速度命令带宽衰减至零值附近,飞机的过度/不足转向特性曲线十分接近临界稳定速度边界,引起操纵特性严重恶化,由此提出了一种采用偏航角速度的局部负反馈来调节系统带宽的自校正增稳设计.分析与仿真结果说明:该模型能够解决使用高阶模型对飞机该项性能分析复杂的问题,可以作为高阶复杂模型分析的一种补充,且提出的增稳方法能使系统偏航角速度命令带宽保持在期望范围内,改善脚蹬操纵的敏感性,提高系统的操纵性能.      

飞行弹丸红外特性的地面模拟试验

设计并建立了用于飞行弹丸中段飞行状态实验室模拟的试验系统,测量获得了飞行弹丸的红外辐射特性.基于传热与辐射理论,分析了相关参数对实验结果的影响,获得飞行弹丸在一定飞行状态下的辐射特性变化规律.目标的初始温度和辐照条件是影响目标辐射特性的主要因素,自旋状态影响辐射特性的空间分布.试验测量与数值仿真和理论分析结果均具有很好的一致性,证明在实验室开展飞行弹丸的红外辐射特性模拟试验具有可行性.     

电缆网阻值测试仪的设计与实现

随着单片机技术的发展及其在测试领域的广泛应用,早期采用的人工作业对电缆网性能测定的方法已经不再适用。本文介绍了一种基于单片机技术的电缆网阻值测试仪。从电缆网阻值测试仪的功能与设计要求出发,阐述了总体设计方案,说明了该套设备的工作原理,描述了系统的硬件实施和软件设计,并对整套设备进行了实验验证。结果表明：设备满足了用户要求,提高了测试效率。     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.     

On the observability of Mars entry navigation using radiometric measurements

A thorough observability analysis of the Mars entry navigation using radiometric measurements from ground based beacons is performed. This analysis involves the evaluation of the Fisher information matrix which is derived from the maximum likelihood estimation. A series of navigation cases with multiple beacons are investigated, and both range and range-rate measurements are considered. The determinant of Fisher information matrix is used to quantify the observability of navigation system, while the trace of Fisher information matrix is used to determine the lower-bound of estimation errors. For one and two beacon cases, the navigation system is unobservable. However, the eigenvectors of Fisher information matrix give the observable and unobservable component. When three or more beacon measurements are employed, the states of entry vehicle become observable. Some valuable analytic conclusions on the relationship between the geometric configuration of beacons and observability are obtained consequently. Finally, simulation results from two navigation examples indicate that our effort is useful for understanding and assessing the observability of the Mars entry navigation using radiometric measurements.     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.