位移序列多进制扩频通信方式

提出用 m序列的位移序列做扩频序列的多进制扩频通信方式 ,并给出了它的系统模型 ,分析了它的通信性能。理论分析证明 ,用 m序列的位移序列构成的多进制扩频通信方式具有很高的通信有效性和通信可靠性     

核翼比法进行表面粗糙度的标定及测量

介绍了一种表面粗糙度标定及测量的新方法。通过标定一组标准样块的核翼比，可以实现该标定范围内待检样块的粗糙度测量，该方法稳定可靠，试验装置简单，数据处理方便，为表面粗糙度的非接触测量提供了较好的方案。     

New Horizons Mission Design

In the first mission to Pluto, the New Horizons spacecraft was launched on January 19, 2006, and flew by Jupiter on February 28, 2007, gaining a significant speed boost from Jupiter’s gravity assist. After a 9.5-year journey, the spacecraft will encounter Pluto on July 14, 2015, followed by an extended mission to the Kuiper Belt objects for the first time. The mission design for New Horizons went through more than five years of numerous revisions and updates, as various mission scenarios regarding routes to Pluto and launch opportunities were investigated in order to meet the New Horizons mission’s objectives, requirements, and goals. Great efforts have been made to optimize the mission design under various constraints in each of the key aspects, including launch window, interplanetary trajectory, Jupiter gravity-assist flyby, Pluto–Charon encounter with science measurement requirements, and extended mission to the Kuiper Belt and beyond. Favorable encounter geometry, flyby trajectory, and arrival time for the Pluto–Charon encounter were found in the baseline design to enable all of the desired science measurements for the mission. The New Horizons mission trajectory was designed as a ballistic flight from Earth to Pluto, and all energy and the associated orbit state required for arriving at Pluto at the desired time and encounter geometry were computed and specified in the launch targets. The spacecraft’s flight thus far has been extremely efficient, with the actual trajectory error correction ΔV being much less than the budgeted amount.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.     

钛合金表面低氧压熔结Al-Si涂层及抗氧化能力

采用低氧压高温快速熔结技术在Ti-6Al-4V合金表面成功地制备出抗高温氧化的Al-Si熔结涂层.与Si改性渗涂层相比,这种工艺相对简单,不需要经过长时间的扩散就能形成足够厚度的Al-Si熔结涂层,省时节能,且涂层中抗氧化元素铝、硅的浓度可通过调整粉末的混合比例来进行控制.X射线检测表明涂层主要由Ti₅Si₃和TiAl₃组成.在923K空气中52h循环氧化试验结果表明:低氧压熔结Al-Si涂层在前10h的氧化过程中氧化增重较快,而在随后的氧化过程中氧化增重较为缓慢,而Si改性渗涂层在氧化过程中一直保持着较高的氧化速率.      

一种基于语义的Ontology映射方法

O n to logy映射是实现异构O n to logy互操作的有效方法,目前的O n to logy映射主要采用句法方法,而很少采用语义方法。本文提出了一种基于语义的O n to logy映射方法,该方法考虑了O n to logy中的概念属性,采用概念名称相似性、概念属性集合相似性、相关概念集合相似性等确定O n to logy之间的语义映射关系;采用语义半径提高了语义映射方法的灵活性。试验分析表明:该方法得到的映射的准确率和查全率在90%以上,准确率和查全率均优于S-M atch方法。该方法已在基于知识需求的主动式知识系统原型中实现,并在某研究所得到了应用。     

刀具变形引起的球头铣刀加工误差建模

针对数控加工中刀具变形引起的加工误差问题,以球头刀具为研究对象,通过建立球头刀具铣削力模型和刀具受力引起的变形模型.对球头刀具变形引起的加工误差进行研究,建立球头铣刀刀具变形引起的加工误差仿真预测模型;在数控加工几何仿真和铣削力仿真的基础上开发了球头铣刀刀具变形引起的加工误差仿真预测功能,并集成到数控加工仿真系统中用于刀具变形引起的加工误差预测.加工验证实验表明所提出的球头铣刀刀具变形引起的加工误差模型预测的可靠性.     

基于LCMV算法的星载SAR距离模糊抑制方法

距离模糊抑制是星载合成孔径雷达(SAR)系统顶层设计中的关键问题之一.增加天线高度可以抑制距离模糊,但卫星平台往往对天线尺寸有所限制.指出了距离模糊抑制对于提高可视观测带宽度、产生高质量雷达图像的重要性,介绍了距离模糊的数学模型,提出了分布距离模糊度的概念,分析了平均距离模糊度与分布距离模糊度的区别,给出了应用线性约束最小方差(LCMV)算法抑制星载SAR距离模糊的方法.仿真结果证明,该方法在天线高度不变的情况下,不仅能够提高平均距离模糊度,也可以改善分布距离模糊度.