Friction and Wear Properties of Amorphous Carbon Nitride Coatings in Water Lubrication

The friction and wear properties of amorphous carbon nitride(a-CN x)coatings in water lubrication were reviewed.The influences of mating materials and tribological variables such as normal load(W)and sliding speed(V)on the friction and wear properties of the a-CN x coatings were analyzed.It was indicated that the specific wear rate of the a-CN x coatings was related to the hydration reaction of mating materials with water.If the mating materials were easily hydrated,the specific wear rate of a-CN x coatings was low.The water-lubricated properties of the a-CN x coatings were better in comparison to the a-C coatings.The a-CN x/Si-based non-oxide ceramics tribo-pairs exhibited the lowest friction coefficient and wear rate.To describe their friction and wear properties at the normal loads of 3—15Nand the sliding speeds of 0.05—0.5m/s,the wear-mechanism maps for the a-CN x/SiC(Si3N4)tribo-pairs in water were developed.     

一种小灯泡的失效分布及其可靠性评定

对两个厂家生产的小灯泡的失效分布进行了一致性检验及拟合优度检验，分析表明，它们的寿命不属同一母体，但均限从对数正态分布，根据可靠性评定的结果，选择可靠性下限较高的A厂的小灯泡是适当的．     

指数分布的预测问题

对指数分布的单样、双样预测问题，进行了详细的讨论，这对寿命服从指数分布的产品的寿命试验有指导意义．     

基于运动特征和中心环绕模型的空对地车辆检测方法

平台的移动基于空基车辆检测以其视野广、速度快、适应性强等优点,近些年成为了智能交通和航空应急救援等领域内的一个热点课题。然而,在城市背景的交通环境下,由于复杂背景造成的干扰、车辆运动的不规律性以及光照等条件变化带来的噪声,有效地获取运动对象特征是空对地视觉监视方法面临的一个难题。为有效解决这一问题,提出了结合运动特征的中心环绕模型进行空对地车辆检测的算法。现有的空对地车辆检测算法,大多是针对固定的摄像头的情况下,基于运动特征进行检测,例如光流法、背景差法等。这些方法在对高速公路等背景相对较为简单的环境下获得了良好的检测结果,但当面对城市复杂背景条件或摄像头自身运动的状况时,难以有效地检测出运动目标。而在对颜色、强度等静态特征进行显著度分析的基础上,加入了对运动特征的分析,可以解决在复杂环境下准确提取车辆目标有效特征的问题。试验表明,相较于基于图像相减的检测算法和单一显著度算法,该算法可以获得更高的检测率与更低的误报率。     

The role of volcanic aerosols and relativistic electrons in modulating winter storm vorticity

Small changes in the vorticity of winter storms, responding to solar wind variations, are found in winters from 1957 to 2011, and are greater for winters with higher levels of stratospheric volcanic aerosols. Using 1993–2011 data, the response of the vorticity area index (VAI) is shown to be of larger amplitude when the days of minima in the relativistic electron flux (REF) precipitating from the radiation belts are used, instead of heliospheric current sheet (HCS) crossings, as key days in superposed epoch analyses. The HCS crossings mostly occur within a few days of the REF minima. The VAI is an objective measure of the area of high cyclonic vorticity, and for the present work is derived from ERA-40 and ERA-Interim reanalyses of global meteorological data. The VAI dependencies on the stratospheric aerosol content (SAC) and the REF are consistent with a model in which the ionosphere-earth current density (J_z) affects cloud microphysics. One of the ways in which J_z is modulated is by changes in stratospheric column resistance (S), which is increased by stratospheric aerosols. Because S is in series with the tropospheric column resistance (T), J_z modulation by REF requires that S be not negligible with respect to T. So the J_z modulation and the VAI response appear when the SAC is very high, or the REF reductions (which also increase S) are very deep, and when the product of the SAC and the reciprocal of the REF exceeds a threshold value dependent on T.     

生长在Si上的GaAs外延膜中有关深能级缺陷与其形貌间的关联研究

由于在GaAs和Si单晶材料间有着很大的格子常数及线性热膨胀系数差别，所以在St上生长的GaAs异质外延薄膜（GaAs／Si）中会存在着界面失配形变与高密度的结构缺陷。我们的实验显示，GaAs／Si外延膜的无序与其生长条件有关，尤其与其［As］／［Ga］比密切相关。与GaAs／Si无序相关的失配位错、线位错及畴区的形貌已用扫描电子显微镜作了观察;与深能级相关的缺陷与其形貌间的关联也已用实验说明。对于高有序GaAs／Si外延膜来说，其与离域相关的主发光峰的强度对温度的变化服从阿兰纽斯方程，而对低有序的GaAs／Si外延膜来说，其与局域相关的主发光峰的强度对温度的变化关系则遵循对无定型半导体才成立的另一种方程。     

强5飞机限流活门建模计算

限流活门是把液体从固定流量转到限流和减少压力脉动的一种液压元件。本文对强５飞机Ｘ２Ａ－５５７０－８５０限流活门进行了计算，对限流活门的设计和限流参数起到一定的作用。     

Single-stage converters for PV lighting systems with MPPT andenergy backup

Single-stage converters (SSCs) are proposed for applications of photovoltaic powered lighting system (PPLS). The synchronous switch technique is employed to develop the SSCs which can fulfill maximum power point tracking (MPPT), battery charging, discharging, and lamp ballasting features. Several typical SSCs are discussed. One of the proposed SSCs, which is the integration of a buck-boost charger/discharger and a class-D series resonant parallel loaded inverter, is analyzed and designed into a PPLS. Both pulsewidth modulation (PWM) and variable-frequency controls are used to govern the system operation. The controller is implemented on a single-chip microprocessor. Simulated and experimental results of the proposed system for driving up to sixteen GE TBX 26 W fluorescent lamps are used to verify the theoretical prediction and feasibility. The proposed system has a simple configuration, as well as a zero voltage switching (ZVS) feature, and can achieve the same functions as those in conventional systems when abrupt insolation changes do not occur frequently. These result in the inherent merits of lower cost, more compact size and possibly achieving higher reliability over conventional systems     

强五D飞机机尾罩下蒙皮铆钉松动、脱落原因浅析

分析了强五D飞机机尾罩下蒙皮铆钉松动、脱落的原因，提出了改进措施，并已应用于外场和成批生产。