Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

民用飞机驾驶舱构型快速设计方法

为在方案设计阶段提高民用飞机总体方案的设计质量和形成效率,研究了民用飞机驾驶舱构型的设计措施,并在一个开放式的飞机总体设计环境中实现了这一功能.定义了飞机机身坐标系,研究了确定驾驶员设计眼位、驾驶舱布置和风挡参数化设计与模型构建的方法.建立了交互式民机驾驶舱构型二、三维快速设计环境.在此基础上,实现了驾驶舱模型的自动化调整,为总体设计阶段进行多学科设计优化奠定了基础.通过设计实例证明了该方法的有效性.     

基于接触状态分析的叶冠阻尼评估与改进设计

采用基于接触状态分析的干摩擦阻尼结构设计方法,针对某型带冠涡轮叶片进行了阻尼评估与改进设计.接触状态包括接触形式和接触参数,通过接触形式从结构上判断结构设计的合理性;通过接触参数从力学性能上评价叶冠的阻尼效果.对叶片的动力特性、接触状态和振动响应进行综合评估分析,找出叶冠结构设计不足之处,并指出具体的改进措施,使叶冠的接触状态及振动响应得到一定的改善,并找到叶冠弦宽稳定工作范围.接触状态能够细致反映出叶冠工作状态下真实的接触情况,为叶冠结构设计和阻尼效果判定提供了更准确、详尽的参考依据.     

前缘吹气控制舵面流动分离

针对各种飞行器大舵偏下出现的流动分离问题,在北航D4风洞对旨在消除舵面流动分离的舵面前缘吹气技术进行了研究,为了降低控制分离所用的吹气量,吹气点设置在舵面前缘气流分离点处.应用粒子图像测速(PIV,Particle Image Velocimetry)技术,分析了舵面绕流在吹气量由小变大过程中所经历的3个不同演化阶段;由测压得到的舵面压力分布则显示,前缘吹气造成的引射作用使前缘吸力峰随吹气量增大而增大,这是前缘吹气能够使舵面升力增大的主要机理.实验结果还表明,前缘吹气可明显提高舵面升力,同时也可以显著降低舵面阻力.     

多星联合任务规划方法

针对多星对地观测系统联合任务规划问题,考虑卫星载荷具备连续侧摆能力和多种数据压缩模式的新特点,构建了多星联合任务规划模型,在此基础上设计多星联合任务规划和数传调度算法框架,实现了卫星连续侧摆成像规划算法和基于任务优先级的数传任务调度算法,最后采用实际算例进行试验,结果表明文章提出的多星联合任务规划方法能在提高完成任务数量的同时降低卫星资源消耗,满足实际应用需求。     

Response of Hainan GPS ionospheric scintillations to the different strong magnetic storm conditions

Using the GPS ionospheric scintillation data at Hainan station (19.5°N, 109.1°E) in the eastern Asia equatorial regions and relevant ionospheric and geomagnetic data from July 2003 to June 2005, we investigate the response of L-band ionospheric scintillation activity over this region to different strong magnetic storm conditions (Dst < −100 nT) during the descending phase of the solar cycle. These strong storms and corresponding scintillations mainly took place in winter and summer seasons. When the main phase developed rapidly and reached the maximum near 20–21 LT (LT = UT + 8) after sunset, scintillations might occur in the following recovery phase. When the main phase maximum occurred shortly after midnight near 01–02 LT, following the strong scintillations in the pre-midnight main phase, scintillations might also occur in the post-midnight recovery phase. When the main phase maximum took place after 03 LT to the early morning hours no any scintillation could be observed in the latter of the night. Moreover, when the main phase maximum occurred during the daytime hours, scintillations could also hardly be observed in the following nighttime recovery phase, which might last until the end of recovery phase. Occasionally, scintillations also took place in the initial phase of the storm. During those scintillations associated with the nighttime magnetic storms, the height of F layer base (h’F) was evidently increased. However, the increase of F layer base height does not always cause the occurrence of scintillations, which indicates the complex interaction of various disturbance processes in ionosphere and thermosphere systems during the storms.     

自然对流对相变材料熔化过程的影响分析

为分析自然对流对相变材料熔化过程的影响,建立了二维瞬态、固/液相统一的控制方程,采用SIMPLE算法对底部加热、顶部冷却的方腔内相变材料熔化过程进行了数值仿真,研究了方腔内温度场和速度场随时间变化规律,结果表明:自然对流使液相区等效导热系数增大;随着固液界面向上移动,液相区自然对流逐渐增强,流动状态不断变化.     

基于鲁棒控制的光纤电流互感器的噪声抑制

光纤电流互感器是一类存在模型参数不确定性的系统,为提高系统测量精度,利用鲁棒控制理论提出了系统的鲁棒H_∞控制器设计方案.分析系统的检测原理并建立数学模型.针对光纤电流互感器系统给出控制器设计指标,使得闭环系统渐近稳定且提高系统噪声抑制能力.理论证明控制器设计方案满足设计指标的要求,并利用线性矩阵不等式的可行解给出了控制器的构造方法.最后通过计算机仿真和实验结果证明了此控制器设计方案的可行性和有效性.     

虚拟远海环境的建模与渲染技术

通过分波幅和分相位的扰动算法,改进了基于线性风浪谱的圆滑波峰现象;结合SNE(Synthetic Natural Environment)的浪级、风级、浪高,以及平均周期等信息,实现了与环境结合的风浪可视化算法;综合心理声学和音乐声学等主观声音学科,提出了风浪波谱参数的修正方案,并实现了实时风浪噪音算法的均衡器特性参数与增益调参;采用基于流动纹理的过程着色方案;并将环境纹理镜像化后合并,然后进行景象的高斯模糊;着色后修饰环境图像噪声,提高了适用于海洋景象模拟的纹素质量;实现了基于SNE综合自然环境信息的实时远海视听一体化系统,验证了视听算法的有效性.     

超燃试验用加热器三维粘性流场数值模拟

超燃冲压发动机试验时,使用燃烧型加热器模拟高焓、高马赫数的来流条件,而加热器的喷注结构对改善加热器出口流场均匀性具有重要作用.使用三维数值模拟软件Fluent对2种喷注结构的燃烧型加热器进行了三维定常反应流场模拟,获得了设计工况下的流场.结果表明,采用多孔斜喷结构能使氢气在横向有较大的穿透深度,加上空气的引射作用在燃烧室头部产生大尺度横向涡,增强了氢气和空气的混合燃烧以及燃气的掺混,使加热器出口温度场不均匀性从53%降为21%,氧气摩尔分数不均匀性从63%降为17%,更有利于开展超燃冲压发动机试验.