基于NESO的高超声速拦截弹解耦控制研究

针对高超声速拦截弹姿态控制问题,提出了基于非线性扩张状态观测器(NESO)的解耦控制方法.根据Tornambe的分散鲁棒控制理论,把耦合项和不确定性视为广义不确定项,构造基于NESO的估计和补偿信号并加入到闭环控制律中.理论推导证明了该方法可以保证闭环系统跟踪误差一致有界.在高超声速拦截弹模型上进行了仿真验证,并与传统的分通道反馈控制方法进行对比,结果表明所设计解耦控制方法得到了更好的控制效果,在较大程度上消除了通道耦合和不确定性的影响.     

转捩模型在翼型气动性能预测 中的应用研究

边界层转捩位置的准确预测对于提高飞行器气动性能的预测精度具有重要意义.选取与k-ω SST湍流模型相耦合的γ-Reθt模型,以零压力梯度平板为研究对象,通过求解基于有限体积法的雷诺平均N-S方程验证该模型自动捕捉流动转捩的准确性;将该模型应用于传统有压力梯度的NACA 0012翼型的流场特性和气动性能的研究中,并与原始k-ω SST模型的计算结果及全湍流试验数据进行比较.结果表明:远场边界距离对翼型阻力系数有较大的影响;与无转捩模型相比,γ-Reθt转捩模型对翼型阻力系数的预测精度有一定程度的提高;对于二维模型,γ-Reθt转捩模型难以捕捉翼型表面的三维效应和非定常分离特性.     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

一种减少失速保护虚警率的混合滤波方法

针对飞机失速保护设计过程中易出现虚警的情况,提出一种基于FIR和传统滤波器相结合的混合滤波方法。结合飞机本体的运动特征,对参与失速保护逻辑运算的两个重要参数,即侧向加速度和迎角信号进行频率分析,基于信号的特征设计混合滤波器,然后采用Simulink滤波工具箱设计滤波器对信号进行滤波处理。仿真结果表明该方法能够减少虚警率的发生,特别是大背景噪声下的虚警率能够得到较好抑制,验证了滤波器设计正确性,从而提高失速保护功能对适航条款符合性。该滤波器设计方法,不但可以有效解决本文提到的问题,对于其他涉及信号处理的系统设计同样具有借鉴意义。     

民用飞机燃油箱点燃防护设计研究

通过研究燃油箱点燃防护适航要求的发展历程,基于对最新适航条款要求的分析和理解及燃油箱点燃防护机理分析,归纳总结了适用于民用飞机燃油箱点燃防护的设计措施,包括点火源防护、减少燃油蒸气和加装惰化系统,为民用飞机燃油箱点燃防护设计和适航验证提供借鉴和参考。     

浅谈基于IPDT的民用飞机重量控制技术

在民机研制过程中,有效地实施重量控制对于项目的成功非常关键。飞机超重不仅会导致设计和运营成本的增加,也将无法实现既定的商载和航程等设计指标。从各部门与重量控制工作的联系出发,结合某型民用飞机的设计实践,介绍了产品联合研发团队(IPDT)模式下重量控制的工作内容、工作流程和常用的减重方法,为民机的重量控制工作提供借鉴和参考。     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

二元双喉道射流推力矢量喷管流动参数影响的数值研究

采用数值模拟方法研究了不同流动参数对二元双喉道射流推力矢量喷管(Dual-throat fluidic Thrust-vectoring Nozzle,DTN)内流特性和推力矢量控制效果的影响。结果表明,DTN在非推力矢量情况下,NPR在3~4范围时,推力系数较大,达到0.968,而流量系数较小,仅为0.93;NPR再增大,推力系数迅速下降。在推力矢量情况下,落压比一定时,随着次流流量比的增加,推力矢量角增加,而流量系数、推力系数、推力矢量效率减小;次流流量比一定时,随着落压比的增加,推力矢量角减小,系统推力系数先增加后减小,流量系数略微增加。     

小展弦比飞翼标模雷诺数影响数值模拟研究

采用数值模拟方法开展小展弦比飞翼标模的雷诺数影响研究。使用自行研制的多块对接结构网格亚跨超声速流场解算器程序Mbflow,计算了试验雷诺数、二倍试验雷诺数和飞行雷诺数等三种雷诺数情况下小展弦比飞翼标模的流场。通过对计算结果的分析研究,得到了不同马赫数(Ma=0.2、0.8和1.5)和攻角情况下雷诺数对小展弦比飞翼标模的气动特性和流场特征的影响规律。小攻角情况下,雷诺数主要影响摩阻的大小;而大攻角时,雷诺数对压阻也有明显影响。在亚声速时,雷诺数主要影响分离涡的起始位置和强度;跨声速和超声速时,雷诺数还会影响到激波的位置和强度。进一步研究了小展弦比飞翼标模的自准区雷诺数问题,发现试验雷诺数接近于小展弦比飞翼标模的自准区雷诺数。     

非对称结构损伤飞机鲁棒容损控制器设计

当飞机发生非对称结构损伤时,飞机的质量、重心位置和气动特性都会发生突变,飞机机体的对称性遭到破坏,致使飞机的横纵向间运动产生强烈的耦合。针对飞机发生非对称结构损伤时导致的飞行控制问题,建立了非对称结构损伤飞机的损伤模型,并基于一种新型鲁棒容损控制策略,采用非线性扩张状态观测器和非线性动态逆相结合的方法,对飞机的姿态控制器进行了设计,兼顾了飞机系统的性能和对损伤的鲁棒性。最后,基于NASA的通用运输机模型,对所设计控制器的控制效果进行了仿真验证。仿真结果表明,设计的姿态控制器有效地抑制了非对称结构损伤给飞机控制系统带来的不确定性和扰动,具有较好的控制性能。