Simulation study on slant-to-vertical deviation in two dimensional TEC mapping over the ionosphere equatorial anomaly

With the rapid increase of GPS/GNSS receivers being deployed and operated in China, real-time GPS data from nearly a thousand sites are available at the National Center for Space Weather, China Meteorology Administration. However, it is challenging to generate a high-quality regional total electron content (TEC) map with the traditional two-dimensional (2-D) retrieval scheme because a large horizontal gradient has been reported over east–south Asia due to the northern equatorial ionization anomaly. We developed an Ionosphere Data Assimilation Analysis System (IDAAS), which is described in this study, using an International Reference Ionosphere (IRI) model as the background and applying a Kalman filter for updated observations. The IDAAS can reconstruct a three-dimensional ionosphere with the GPS slant TEC. The inverse slant TEC correlates well with observations both for GPS sites involved in the reconstruction and sites that are not involved. Based on the IDAAS, simulations were performed to investigate the deviation relative to the slant-to-vertical conversion (STV). The results indicate that the relative deviation induced by slant-to-vertical conversion may be significant in certain instances, and the deviation varies from 0% to 40% when the elevation decreases from 90° to 15°, while the relative IDAAS deviation is much smaller and varies from −5% to 15% without an elevation dependence. Compared with ‘true TEC’ map derived from the model, there is large difference in STV TEC map but no obvious discrepancy in IDAAS map. Generally, the IDAAS TEC map is much closer to the “true TEC” than is STV TEC map is.     

Solar-photon sail hovering orbits about single and binary asteroids

Solar-photon sails can be useful for missions towards and about asteroids. Indeed, for the interplanetary transfer phase, missions to asteroids often require a large variation in inclination and solar-photon sails perform very well for such high energy missions. In the same way, solar-photon sails are also expected to perform well in the phase about the asteroid. This paper studies single and binary asteroids’ hovering regions by using a sailcraft. In order to consider a sailcraft with its own mass and shape, the mutual polyhedral method (usually used to study asteroid dynamics) is used; therefore, the sailcraft is designed by means of tetrahedra. The procedure to obtain the hovering regions about a single asteroid is presented and an accurate analysis of the control variables is carried out. Moreover, control torques required to maintain hovering orbits are obtained by considering the gravitational torques acting on the sailcraft due to the asteroid. In the end, the theory for hovering orbits is extended to binary-asteroid systems and applied to the binary system 1999 KW4.     

K8飞机襟翼装配工艺的改进

Ｋ８飞机襟翼装配长期达不到设计要求，成为技术关键。本文从多方面分析了产生问题的原因，并详细介绍了改进方法及其效果。     

EW射频隐身系统频率选择表面电磁散射参数的测量

频率选择表面(FSS)技术为电子战射频隐身提供了新的实现技术途径,散射参数的测量验证是射频隐身系统FSS设计的关键环节.针对非理想测量环境,以一种小型化带阻频率选择表面为例,提出了一套频率选择表面散射参数的测量和校准方法,有效消除了测量中信号的衰减、测量天线间的耦合以及信号多径传播等对真实结果造成的影响,使之尽可能接近在理想环境中的测试结果.该方法极大改善了周期性人工电磁结构散射参数测量对环境的依赖,降低了射频隐身FSS设计的研发成本,在电子战领域具有良好的应用前景.     

提高UV-LIGA制备金微细零件的尺寸精度研究(英文)

在众多影响UV-LIGA(Ultra-violet lithography Galvanik abformung)技术制备微细金属零件尺寸精度的因素中,SU-8胶溶胀性是最主要的。通常采用隔离带方法降低SU-8胶的溶胀性,以提高电铸微细零件的尺寸精度。由于贵重金属会沉积到隔离带内,造成了贵重金属的浪费,增加制造成本,因此该方法不适合贵重金属微细零件制造。针对隔离带方法的弊端,提出了半隔离带方法,在保证电铸微细金属零件尺寸精度的前提下,避免了贵重金属的浪费。另外,还采用电解液喷射方法实现了高电流密度电铸,缩短了电铸时间,进一步提高了电铸微细金属零件的尺寸精度。试验结果表明:采用半隔离带方法和高电流密度,可以有效提高金微细零件的尺寸精度,当电流密度提高到0.6A/dm2,金微细零件的尺寸精度可以达到5μm。     

差压铸造控制系统的研究

采用高响应数字化气动元件——组合式数字阀，研制开发差压铸造液面加压控制系统，研究系统控制算法及控制精度影响因素。结果表明：采用PCM控制算法控制数字阀的开度及开启时间提高了系统的响应速度和控制精度，在生产中有效提高了铝合金性能。     

情报研究成果的AHP-F评价

本文采用层次分析法与模糊数学综合译判法相结合的方法——AHP-F法,提出了综合情报评判研究成果指标体系和方法,旨在实现对情报研究成果的科学有效的管理。     

铝合金构件的原位快速表面处理方法研究

着重探讨了在外场操作条件下，对航空铝材进行原位、快速表面处理的几种方法以及不同表面处理对粘接效果的影响。结果表明：对受损的通用航空铝合金(LY12-CZ)表面，采用自行研制的酸膏进行氧化处理，能造就具有一定特征形貌的铝合金表面氧化层，从而使粘接强度提高76．0％，并可实现对构件表面的快速、原位处理，能满足装备构件外场修复的基本要求。     

旋转定子环双作用变量叶片泵供油调节特性研充

 1.变量原理和供油量的一般计算公式 双作用叶片泵的转子径向液压力平衡,轴承负荷小,寿命高,且工作转速已可达40000～50000r/min,可实现由航空发动机直接传动,是一种有发展前途的航空发动帆燃油泵.现有的双作用叶片泵几乎都是定量泵,其供油量只能用外部回油调节,功率损失和发热量都很大。