俯仰力矩曲线的“勺形”对飞机稳定性的影响

 本文用微分方程定性理论来分析俯仰力矩曲线随迎角变化的“勺形”对飞机飞行稳定性的影响。 结果表明,“勺形”是飞机在小侧滑角下作大迎角非机动飞行时,引起迎角突跃而进入过失速飞行的一种重要因素。“勺形区”的宽度和深度则较大程度地影响这种过失速飞行的特性及其进入与改出的特点。     

关于地球卫星运动中的坐标系附加摄动问题

关于卫星运动中的坐标系附加摄动，早期是从两种赤道坐标系中卫星轨道根数的差别采用大量球面三角公式的方法导出的，本文将改用与当今高精度数值解中的坐标转换关系，在岁差章动等参数完全一致的情况下，简要清晰地导出相应的坐标系附加摄动解，既容易被读者接受，又便于与对应的数值解进行比对。     

射频识别技术在仓库管理中的应用

射频识别(又称电子标签),是一种利用射频信号自动识别目标对象并获取相关信息的技术.本文从推进军队信息化建设出发,利用RFID技术实现了装备的自动识别.介绍了射频识别技术的系统基本原理,还介绍了射频标签在国内外物流管理领域中的广泛应用.最后介绍了射频识别技术在仓库管理中的应用.     

飞机配电系统中交流模拟固态功率控制器设计

主要介绍了一种交流模拟固态功率控制器（SSPC）的设计和实现。它主要使用了在嵌入式系统中广泛应用的单片机，来实现SSPC的基本功能。从核心器件到对负载电流通断控制以及对采入信号的调理都进行了详细的介绍与说明。     

Control technique for high power factor multilevel rectifier

Three control techniques for a high power factor multilevel pulsewidth modulation (PWM) rectifier are proposed. The proposed rectifier is based on series connection of full-bridge cell to achieve a high power factor, low current distortion, low voltage stress of power semiconductors and two balanced output voltages. The look-up table is used in the proposed control schemes to reduce the hardware circuit. A capacitor voltage compensator is used to balance two dc capacitor voltages in order to obtain high quality PWM voltage pattern. Based on the proposed control schemes, two-level or three-level PWM pattern can be generated on the ac side of the adopted rectifier. The proposed techniques for a high power factor multilevel rectifier illustrate its validity and effectiveness through the respective simulations and experiments. According to the measured results, the current harmonics drawn from the mains meet the International Electrotechnical Commission (IEC) 1000-3-2 limits     

Al—Si过共晶合金中初生硅溶解特性的实验研究

利用等温液淬及快速凝固技术研究了Ａｌ－１８．０８％Ｓｉ合金中初生硅在液态中的溶解行为。实验表明，合金液加热到１０００℃以下，保温２ｈ，初生硅仍未完全溶入液态合金。初生硅的溶解速率随时间延长而减小。快速凝固证实初生硅在液态合金中具有较高的化学稳定性。     

师生交流-- 教学艺术的基石

由古迄今，许多教育学家都提出了教学是一门艺术的观点。笔者从追溯历史的角度出发，指明了教学艺术的基石是良好有效的师生交流，阐述了师生交流中存在的问题；并说明为使教学真正成为一门艺术，给所有的人以艺术的美的享受，师生之间应该实现情感、审美以及创造性思维的交流，从而达到最佳的教学效果。     

EXPERIMENTAL INVESTIGATION ON CHANGE OF COLDWORKING RESIDUAL STRAIN OF HOLE IN ALUMINIUM ALLOY SHEET

ＥＸＰＥＲｉＭＥＮＴＡＬＩＮＶＥＳＴＩＧＡＴＩＯＮＯＮＣＨＡＮＧＥＯＦＣＯＬＤＷＯＲＫＩＮＧＲＥＳＩＤＵＡＬＳＴＲＡＩＮＯＦＨＯＬＥＩＮＡＬＵＭＩＮＩＵＭＡＬＬＯＹＳＨＥＥＴＬｉｎＹｉｎｇ（ＳｈｅｎｙａｎｇＩｎｓｔｉｔｕｔｅｏｆＡｅｒｏｎａｕｔｉｃａ...     

THE CLUSTER ION SPECTROMETRY (CIS) EXPERIMENT

The Cluster Ion Spectrometry (CIS) experiment is a comprehensive ionic plasma spectrometry package on-board the four Cluster spacecraft capable of obtaining full three-dimensional ion distributions with good time resolution (one spacecraft spin) with mass per charge composition determination. The requirements to cover the scientific objectives cannot be met with a single instrument. The CIS package therefore consists of two different instruments, a Hot Ion Analyser (HIA) and a time-of-flight ion COmposition and DIstribution Function analyser (CODIF), plus a sophisticated dual-processor-based instrument-control and Data-Processing System (DPS), which permits extensive on-board data-processing. Both analysers use symmetric optics resulting in continuous, uniform, and well-characterised phase space coverage. CODIF measures the distributions of the major ions (H⁺, He⁺, He⁺⁺, and O⁺) with energies from ~0 to 40 keV/e with medium (22.5°) angular resolution and two different sensitivities. HIA does not offer mass resolution but, also having two different sensitivities, increases the dynamic range, and has an angular resolution capability (5.6° × 5.6°) adequate for ion-beam and solar-wind measurements.     

金属基复合材料的高速超塑性

介绍了近几年国内外金属基复合材料(MMCs)高速超塑性的研究现状，包括拉伸超塑性、压缩超塑性。综述了各种基体和增强体复合材料的制备方法、获得高速超塑性的条件及高速超塑变形的特点。对于高速超塑性的变形机制，尤其是颗粒增强金属基复合材料的拉伸超塑变形机制进行了详细阐述。最后提出了MMCs高速超塑性存在的问题和今后研究的重点。