Using vegetation indices and texture measures to estimate vegetation fractional coverage (VFC) of planted and natural forests in Nanjing city,China

Vegetation fractional coverage (VFC) is an important vegetation parameter affecting exchanges of carbon, water, energy between the atmosphere and surface. In this study, the applicability of tonal and texture measures calculated using an IKONOS_2 image in retrieving VFC of forests was investigated in the urban area of Nanjing city, China. Four spectral vegetation indices (VI) and six texture measures (TEX) were related to VFCs acquired from in situ measurements. Models for estimating VFC based on VIs or/and TEXs were established and validated for planted low broad-leaf forest plots (PLB), planted mature forest plots (PMF), natural broad-leaf forest plots (NBF), and all forest plots (ALLv), respectively. The results show that high spatial resolution remote sensing data is applicable to estimate VFC in urban areas, and TEXs may act as effective supplements of vegetation indices (VIs) for the retrieval of VFC. VIs are suitable for VFC estimation of mature forests (such as NBF and PMF) with high vegetation density, and TEXs can yield a more accurate estimate for planted forests (such as PLB and PMF) with regular spatial distribution if they are calculated with proper parameters, such as window size. The combination of VIs and TEXs improve the estimation of VFC if forest types are not previously differentiated. The results can be used as a reference for determining effective spectral or texture parameters in VFC estimation under similar environmental conditions according to vegetation maturity and regularity.     

Internet和数据库

Internet与数据库系统的连接除了常见的CGI以外，还可利用API和Java实现，各大数据库厂商亦有其不同的策略。换个角度，Internet本身就是一个硕大的分布式超媒体数据库，超链完整性的维护更是一个很重要的问题。     

Crystal orientation and morphology of α lamellae in wrought titanium alloys: On the role of microstructure evolution in β processing

To obtain high-quality aviation forgings of titanium alloys, β forging is an essential processing step which must be considered throughout a production process. In this work, the effect of β forging on the crystal orientation and morphology of lamellar α was experimentally investigated in a two-phase titanium alloy. Strong dynamic recovery during β working resulted in the formation of low-angle grain boundary (LAGB_β) inside β grains. The lamellar α can penetrate through the LAGB_β, leading to similar intra α LAGBs on subgrain boundaries. Deformation banding occurs at high strain rates, and both diffusive and sharp boundaries of deformation bands can be observed. A continuous change of the β orientation in diffusive boundaries results in the formation of fine and disordered α lamellae without intra-lamellar boundary to hold the Burgers orientation relationship (OR). On sharp boundaries, it is prone to producing continuous grain boundary α (α_GB) with a highly similar orientation along the boundaries. Meanwhile, there may exist several lower-angle boundaries within the grain boundary α for a smoother orientation change on the β grain boundary.     

Design and implementation for a digital synchronous reluctancedrive

A systematic controller design for a synchronous reluctance drive system is presented. This controller consists of two parts: a forward-loop H^∞ controller to improve the transient response, and a load compensator to reduce the load disturbance. Based on a simplified model of the drive system, a control algorithm has been derived. Detailed analysis of the characteristics of the closed-loop system is presented. The effects of the parameter variations are also studied. A digital signal processor, TMS-320-C30, is used to implement the control algorithm. Both the speed control and the position control of the drive system can be implemented by using the proposed control method. Furthermore, all the control loops are executed by the digital signal processor. The system, as a result, is very flexible. The whole drive system performs well although its hardware is very simple. For speed control, the system can be operated at a speed as low as 1 r/min. For position control, the system can accurately control a one-axis table. In addition, the system also has good position tracking ability. Several experimental waveforms validate the simulated results     

虚拟量仪——一种新的量仪设计思想

从虚拟仪器和虚拟现实技术出发，提出了虚拟量仪这一新概念，并对虚拟量仪的定义、特点、优点、结构形式以及虚拟量仪设计的基本思想、基本内容和关键技术作了分析。     

航空装备综合诊断的现状与发展设想

综合诊断是伴随着装备的发展和对装备保障能力的要求不断提高而产生和发展的,为此将国外航空装备综合诊断技术的发展历程以及各综合诊断系统的具体组成进行了对比,阐述了当前我国航空装备故障诊断的情况,分析了综合诊断的支撑技术和发展趋势,提出在我国航空装备的维修保障中实施综合诊断的必要性,并对我国建立面向多机型、多专业、以网络为中...     

基于仿真分析的压铆力预测模型

铆接是飞机结构机械连接的主要方式,压铆力作为影响铆接质量的重要因素,传统的计算方法通常是建立在体积不变的假设之上,且不考虑钉杆材料被压入钉孔部分的体积,导致模型误差较大。为此,依据仿真分析结果和铆钉材料的流动趋势,引入体积缩减系数来描述钉杆被压入钉孔部分的体积,建立压铆力预测模型,并与已有的试验数据进行对比,结果表明计算值与试验值的一致性较好,该模型可以用来预测铆接过程中压铆力的大小。     

一种奇异混合阵的盲信号提取算法

在盲信号提取技术中,当混合矩阵是奇异方阵时,根据混合矩阵秩的性质,该文提出了一种盲信号可提取性判据来判断可提取的信号。通过引入信号变化度的概念,给出了一种在该情况下的可提取信号的提取算法。该算法可以将特定的信号提取出来,且计算简单,无需优化处理,可以解决奇异混合阵情况下的特定信号的提取。试验结果表明了该算法的有效性。     

光电自准直仪现状与展望

介绍了国际和国内光电自准直仪技术发展的现状，着重介绍国内外几种有代表性的光电自准直仪的情况，并对光电自准直仪今后的发展作出展望