STAP with medium PRF mode for non-side-looking airborne radar

Space-time adaptive processing (STAP) has been widely discussed for airborne radar systems to improve the system performance of detecting targets. This is especially true for airborne early warning (AEW) radar, which should find long-range and small radar cross section (RCS) targets such as the stealth aircraft and missiles. However, in existing airborne radar literature, STAP is mainly considered for clutter and jamming rejection in side-looking airborne radar (SLAR) applications. There have been fewer discussions on airborne radar with non-side-ways looking array radar (non-SLAR). The STAP of non-SLAR such as forward looking array radar is also very important and can not be avoided for airborne radar to detect targets in all directions. The STAP of the non-SLAR is studied here. A scheme has been proposed, which is processed by the way of STAP combined with multiple staggered medium pulse repetition frequencies (PRFs). We further study the selection of PRFs in order to make the scheme more available for non-SLAR radar. We analyze two typical non-SLAR cases, i.e., inclined-sideways looking array and forward looking array. We examine this scheme by comparing the performances of three processing systems under the criteria of range-velocity blind zone minimization. Computer simulation results show the multiple-PRFs STAP scheme is feasible for non-SLAR and can be applied to phased-array AEW radar systems     

Airborne adaptive MTI scheme with preventing the whitening of thetarget

A new airborne MTI scheme that applies to non-homogeneous clutter environment is presented. Results of simulation have proved that the scheme has a superior ground clutter suppression performance and can effectively prevent the whitening of a target     

关于满足海军需求的直8型直升机的改进

本文对直8型机的发展提出了改进、改型的途径,并进行探讨,以满足适应我海军部队使用的各型直8机。     

小波技术在组合导航系统故障诊断中的应用

针对组合导航系统中存在的故障类型和特点，提出一种新的基于信号处理的故障检测方法。该方法利用小波分析技术对含有故障信息的系统信号进行分析处理，并将此方法应用于SINS／GPS组合导航系统。仿真结果分析表明，小波分析技术能很好地及时检测出组合导航系统的硬故障，且更加简便灵活，从而可以将小波分析技术应用于组合导航系统的故障检测。     

分布式干扰仿真研究

在简要分析旁瓣对消原理的基础上,通过建模与仿真对多干扰机分布式干扰对抗雷达旁瓣对消的效果进行了分析,结果表明,多干扰机分布式干扰是对抗旁瓣对消的有效技术途径.     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

基于特征模型的火箭发动机伺服控制系统设计

以新型大推力火箭发动机为研究对象,提出了基于特征模型的伺服系统控制器设计方法。首先,介绍了特征建模理论并讨论了特征模型参数范围;其次,采用人工蜂群算法实时估计火箭发动机伺服系统特征模型参数,使其满足特征模型输出与实际系统输出特性等价条件;最后,使用黄金分割自适应控制律保证系统在参数估计过程中的闭环稳定性,同时引入前馈跟踪控制律,逻辑积分控制律和逻辑微分控制律使伺服控制系统快速、精确跟踪线位移指令并改善动态性能。仿真结果表明,设计的火箭发动机伺服控制系统指令跟踪精度高,动态特性良好,鲁棒性强。     

现代远程教育的媒体素材构建方法

本文阐述了媒体素材的采集及处理方法 ,对现代远程教育工程建设可提供有效的帮助     

Determination of optimal samples for robot calibration based on error similarity

Industrial robots are used for automatic drilling and riveting.The absolute position accuracy of an industrial robot is one of the key performance indexes in aircraft assembly,and can be improved through error compensation to meet aircraft assembly requirements.The achievable accuracy and the difficulty of accuracy compensation implementation are closely related to the choice of sampling points.Therefore,based on the error similarity error compensation method,a method for choosing sampling points on a uniform grid is proposed.A simulation is conducted to analyze the influence of the sample point locations on error compensation.In addition,the grid steps of the sampling points are optimized using a statistical analysis method.The method is used to generate grids and optimize the grid steps of a Kuka KR-210 robot.The experimental results show that the method for planning sampling data can be used to effectively optimize the sampling grid.After error compensation,the position accuracy of the robot meets the position accuracy requirements.