基于二阶滑模算法的永磁电机直接转矩控制

针对传统直接转矩控制(DTC)方法低速控制精度差、转矩脉动大、开关频率不稳定等问题,提出了一种基于二阶滑模控制的永磁电机DTC方法。该控制方法基于二阶滑模控制原理,将传统磁链控制器与转矩控制器以滑模控制器替代,对空间电压进行矢量调制,提高了开关频率的稳定性,获得了良好的动态稳定性,改善了电机输出性能。仿真与试验结果表明,该控制方法能够有效减小电流脉动与转矩脉动,同时提高了控制系统的抗干扰能力,实现了电机的快速动态响应,具有较强的鲁棒性能。     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

Containment of soft wall casing wrapped with Kevlar fabric

Aramid fabrics have been commonly used in the civil turbofan engine fan blade containment system for its excellent performance. To investigate the behavior and capability of soft wall containment casing, a series of fan blade released tests were conducted on the high-speed spin tester.The soft wall casing was fabricated by wrapping multiple layers of Kevlar49 plain woven fabric around a thin steel ring. Casings with different inner metal ring and outer fabric layers number were compared. The method of using the explicit dynamic software LS-DYNA to establish the finite element analysis model for the quantitative analysis of the containment process was developed and conducted. The simulation results are in good agreement with the test results. It is shown that the containment process of the soft wall casing can be divided into three impact stages. The casing with low-stiffness inner metal ring will get severe overall deformation and lose the structural integrity when it suffers the blade impact. Kevlar fabric layers will appear large bulge on outside surface and absorb the most impact dynamic energy of the high speed released fan blade. By summing up the results of the test and simulation, an empirical critical equation was derived to describe the relationship between the released blade dynamic energy and the Kevlar fabric thickness.     

Six sigma robust design optimization for thermal protection system of hypersonic vehicles based on successive response surface method

Lightweight design is important for the Thermal Protection System(TPS) of hypersonic vehicles in that it protects the inner structure from severe heating environment. However, due to the existence of uncertainties in material properties and geometry, it is imperative to incorporate uncertainty analysis into the design optimization to obtain reliable results. In this paper, a six sigma robust design optimization based on Successive Response Surface Method(SRSM) is established for the TPS to improve the reliability and robustness with considering the uncertainties. The uncertain parameters related to material properties and thicknesses of insulation layers are considered and characterized by random variables following normal distributions. By employing SRSM, the values of objective function and constraints are approximated by the response surfaces to reduce computational cost. The optimization is an iterative process with response surfaces updating to find the true optimal solution. The optimization of the nose cone of hypersonic vehicle cabin is provided as an example to illustrate the feasibility and effectiveness of the proposed method.     

摆线桨非定常动态失速的三维效应

对摆线桨三维全尺寸模型进行了非定常数值模拟。验证了两种嵌套网格方法的可靠性与适用性,针对二维/三维情况下摆线桨非定常涡流动特性及诱导分离特性开展了数值分析,重点研究了展向气动力随方位角的分布与全局流场的诱导速度分布,并分析了尾迹捕捉精度与涡量耗散特征。结果表明:受摆线桨切向速度、展向诱导速度等三维效应影响,两种计算结果的瞬态气动力极值差值达到44%。三维动态失速涡的产生、脱落与再附明显弱于二维翼型情况,这对于摆线桨非定常气动特性有较大影响。      

涡扇发动机消喘系统飞行试验验证方法研究

针对涡扇发动机消喘系统飞行试验验证需求,和传统试验方法不能有效验证消喘结束后发动机状态恢复能力的问题,根据消喘系统工作原理,提出了单次喘振和连续多次喘振下消喘系统的飞行试验验证方法。该方法通过加装座舱开关,触发发动机调节器内设置的喘振模拟模块,发出根据真实喘振信号特征设计的喘振模拟信号,从而使得消喘系统工作,验证飞行状态下发动机消喘系统对短时切油、喷口面积和可调导叶的控制及消喘结束后发动机状态恢复的能力。试验结果表明:所提出的方法能有效验证消喘系统的功能及消喘结束后发动机状态恢复的能力。本研究对发动机消喘系统可靠性和有效性的飞行试验鉴定具有一定的工程应用价值。     

ZSGA?2型重力敏感器关键技术分析与试验验证

与国外主流海洋重力仪相比,国产海洋重力仪的分辨率低一个数量级,这制约了国产海洋重力仪的应用。针对国产海洋重力仪亟需提高分辨技术的需求,根据ZSGA-2型重力敏感器的工作原理,建立了弹性系统的力学模型,并开展了样机的静态性能测试。测试结果表明,经零位漂移和大地固体潮汐修正后的静态精度达到了0.03mGal,样机随重力仪进行楼层高差测量的重复性为0.15mGal。该型重力敏感器的分辨率已经达到了国外同类产品的技术水平,并具备了一定的动态适应性,为该型高分辨率零长弹簧重力敏感器开展高动态环境适应性技术研究奠定了坚实基础。     

无人水面艇自适应路径跟踪算法

路径跟踪作为无人水面艇（Unmanned Surface Vehicle, USV）控制系统中必不可少的底层模块,受到国内外无人水面艇研究人员的普遍关注。为了提高无人水面艇路径跟踪的准确性和自适应性,提出了一种基于Mamdani模型的自适应模糊LOS控制策略(Mamdani Based on Line-of-Sight,MLOS）。相比传统LOS控制策略,该算法通过模糊控制修正LOS控制参数,削减了速度与LOS制导律之间的耦合,确保了路线跟踪的完成度,并且避免了传统LOS各项参数固定、不能实时调整而导致的船舶操纵性无法被充分利用的缺点。基于欠驱动水面滑行艇数学模型,通过理论分析和仿真试验证明了该算法的优越性和有效性。     

用于BVI噪声试验的新型涡发生器设计与分析

针对直升机特有的旋翼桨/涡干扰(Blade vortex interaction,BVI)噪声计算精度低且试验数据缺乏问题,也为了开展旋翼气动噪声特性分离方法的验证试验研究,本文设计了一种能够用于BVI噪声试验的新型多段翼型组合式涡发生器。首先通过CATIA软件建立涡发生器出口端翼型段在不同迎角下的试验模型,再使用FLUENT软件建立涡发生器的流场仿真计算模型,比较分析了不同翼型段迎角下的涡流流场。随后用粒子图像测速法(Particle image velocimetry,PIV)技术系统测量了不同翼型段迎角、距离涡发生器出口端的长度及流速等参数变化下的涡流流场,对不同试验状态下的涡核、涡强等参数进行了对比分析。针对涡量偏弱的缺点,对传统单级涡发生器进行了改进,设计研发了双级涡发生段。试验证明其能产生更强且稳定的涡,为BVI噪声试验提供了模拟的桨尖涡,试验结果表明了涡发生器的有效性。     

卫星能源约束检查模型改进及仿真

卫星能源约束检查模型对卫星任务规划有重要参考作用,可防止因能源不足而导致卫星故障或任务不能顺利完成。现有的能源约束检查模型存在部分问题:人为设定计算初始值,导致计算不准确;能源约束检查不通过时未给出符合能源约束的任务调整建议,导致任务不能快速调整;未对计算误差进行校正,导致误差积累。对此,提出了一种改进的能源约束检查模型,在原有模型中加入能源数据库对卫星运行的能源数据进行记录,从而准确获取初始值,并在模型中加入任务调整和遥测校正功能。该模型可实现能源约束计算自动管理及任务自动调整功能,缩短任务规划周期,提升紧急任务的执行效率。对改进的模型进行仿真,结果表明:模型预测结果与预期值相符,任务调整和能源校正功能实现良好,能实际应用到运控系统中进行规划任务能源约束检查和能源管理。