样品温度对原子氧环境下ITO/Kapton/Al涂层性能变化的影响

文章利用原子氧环境地面模拟设备对航天器用材料ITO/Kapton/Al开展了原子氧环境试验研究。研究中选择的原子氧积分通量为9.1×1019 atoms/cm2,试验真空度为10-2 Pa量级,样品温度分别选取为25℃、70℃、100℃、120℃和150℃,研究样品温度对原子氧环境模拟试验可能造成的影响。试验后利用高精度微量电子天平对样品进行了质量损失测试并计算了材料的反应率,利用TEMP 2000A便携热发射率测试仪和LPSR 300便携光谱太阳吸收率测试仪分别对样品的发射率和太阳吸收比进行了测试。通过试验及分析发现:ITO膜对基底材料的保护较好,材料在试验后质量损失较少,原子氧反应率较低;样品温度的变化对ITO/Kapton/Al材料的质量损失影响较小,但对材料的热物理性质影响较大。     

航天器磁环境试验数据库的建设

文章介绍了航天器磁环境试验数据库的建设方案,重点介绍了数据库一些技术特点,如应用元数据驱动的软件架构、构建面向对象的工程数据库模型、引用虚拟XML数据库技术以及接口编程的实现方法。数据库的建设有利于磁试验数据的规范管理和有效利用,为空间磁环境专业的发展提供数据支持。     

卫星承力筒结构的模态试验方法探讨

文章详细阐述了某型号卫星承力筒结构的模态试验设计及试验实施过程中所取得的实践经验。采用单点随机激励法、两点随机激励法、单点步进正弦扫描激励法均能得出较准确的航天器结构主频。较好的办法是:为获取大型航天器结构的一阶主频,可先采用单点随机激励法得出结构主频,然后采用单点步进正弦扫描激励法进行数据结果的验证;为获取大型航天器结构的高阶模态参数或结构阻尼系数,应采用两点或两点以上的模态试验激励方法,使激励输入能量平均且更接近于航天器结构实际受力工况。文章中对承力筒结构模态试验设计及方法的探讨对大型航天器的结构模态试验具有借鉴作用。     

位相物体的三维非对称温度场的重建

采用卷积背抽影公式实现了位相物体的三维非对称温度场的重建,为光线偏／折测量三维非对称温度场提供了高精度分析和处理实验数据的方法。     

Aerodynamic Performance and Aeroacoustic Characteristics of Model Rotor with Anhedral Blade Tip in Hover

Experimental investigation on the aerodynamic performance and aeroacoustic characteristics of model rotors with different tip anhedral angles in hover are conducted in the paper.Three sets of model rotors with blade-tip anhedral angle 0°(reference rotor),20°and 45°respectively are designed to analyze the influence of the anhedral angle on the hovering performance and aeroacoustics of rotor.In the environment of anechoic chamber,the hover experiments under the different collective pitch and blade numbers,are carried out to measure the figure of merit(FM),time history of sound pressure and sound pressure level(SPL)of the three rotor models.Based on test results,the comparison and analysis of hovering performance and aeroacoustic characteristics among the three rotor models have been done.Meanwhile,for the sake of analysis,the rotor wake and blade pressure distribution are simulated by means of computational fluid method(CFD).At last,some conclusions about the effects of blade-tip anhedral angle on the aerodynamic performance and aeroacoustic characteristics in hover are obtained.An anhedral blade tip can enhance the FM of the rotor,and decrease the rotor loads noise to some extent.     

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

ABORT-like detector to combat active deceptive jamming in a network of LFM radars

This paper studies an electronic counter-counter measures (ECCM) scheme combating against deceptive electronic counter measure (ECM) techniques.An adaptive detector exploiting generalized likelihood ratio test (GRLT) criterion is applied to detect the presence of deceptive jamming in fractional Fourier transform (FrFT) domain.First,the generating mechanism of spurious frequencies is analyzed based on the Volterra serial.The proposed nonlinear distortion model based on power amplifier behavior is robust in distortion analysis when the memory effect is considered.Second,a modified adaptive beamformer orthogonal rejection test (ABORT) like detector in closed form is built.The proposed detector can discriminate the echo and deceptive jamming adaptively by exploiting primary data and secondary data.This ECCM scheme is capable of guaranteeing the performance without the restriction of orthogonality,which is essential for the ABORT detectors.The expansion to radar network is discussed as a special case at the final part of this paper.Numerical simulations demonstrate the effectiveness of the proposed method.     

Disturbance observer based model predictive control for accurate atmospheric entry of spacecraft

Facing the complex aerodynamic environment of Mars atmosphere, a composite atmospheric entry trajectory tracking strategy is investigated in this paper. External disturbances, initial states uncertainties and aerodynamic parameters uncertainties are the main problems. The composite strategy is designed to solve these problems and improve the accuracy of Mars atmospheric entry. This strategy includes a model predictive control for optimized trajectory tracking performance, as well as a disturbance observer based feedforward compensation for external disturbances and uncertainties attenuation. 500-run Monte Carlo simulations show that the proposed composite control scheme achieves more precise Mars atmospheric entry (3.8?km parachute deployment point distribution error) than the baseline control scheme (8.4?km) and integral control scheme (5.8?km).     

基于力控制的机器人装配作业实验研究

本文给出了工业机器人完成装配作业的一种实现方案──主动柔顺手腕。从技术的角度解决了主动柔顺手腕在装配过程中的搜孔策略、控制方法、柔顺中心设置、卡阻的避免等问题，最后在Ｍｏｖｅｍａｓｔｅｒ—ＥＸ机器人和ＰＵＭＡ５６２工业机器人上进行了无倒角高精度轴孔配合的实验。     

在轨气动全柔性触手用材料的成型工艺研究

根据空间在轨抓捕服务的需求,针对PDMS和E30两种硅橡胶材料开展全柔性触手的材料制备和结构成型工艺研究,分析不同工艺参数对材料硬度及力学性能的影响。结果表明,随着固化温度的升高和固化时间的延长,两种材料的杨氏模量均逐步提高;随着固化剂占比的提高,杨氏模量呈先上升后下降的趋势。在此基础上,分别采用半固化和全固化工艺制备E30/PDMS/E30三明治结构的复合材料,结果表明半固化工艺所得样品具有明显的界面过渡层和较高的拉伸强度,其断裂伸长率达460%,性能优势突出。采用分析所得最佳工艺制备的气动柔性触手样品具有较好的运动特性——当气压为58 500 Pa时,触手的平均卷曲角速度为0.4 rad/s,最大达0.8 rad/s。本工艺研究结果为实现轨道目标物体的捕获提供了新的材料制备方法和思路。