Interference between FM Carriers and a Digitally Modulated SCPC Circuit

The interference from the digital single channel per carrier (SCPC) circuits into frequency-modulated carrier systems has been calculated by convolving the desired and the interfering spectra extending the previously published works. Resulting interference noise power in FDM/FM systems covering a wide range of modulation indices and basebands has been presnted. Also plots of interference noise power as a function of the number of SCPC circuits have been presented for various values of carrier power to interference power ratios.     

Satellite fault diagnosis using a bank of interacting Kalman filters

The main objective of this work is development and testing of a detection, isolation, and diagnosis algorithm based on interacting multiple model (IMM) filters for both partial (soft) and total (hard) reaction wheels faults in a spacecraft. This is shown to be accomplished under a number of different faulty mode scenarios for these actuators associated with the attitude control system (ACS) of a satellite. Various operating and faulty conditions due to changes and anomalies in the temperature, the power supply line voltage, and the loss of effectiveness of the torque and the current are considered in each reaction wheel associated with the three axes of the satellite. Once a fault mode is detected and isolated the recovery procedure can subsequently be engaged by invoking appropriate switching control strategies for the ACS. The application of a bank of interacting multiple Kalman filters for detection and diagnosis of anticipated reaction wheel failures in the ACS is described and developed. Compared with other model-based fault detection, diagnosis and isolation(FDDI) strategies developed in the control systems literature, our FDDI strategy is shown, through extensive numerical simulations, to be more accurate and robust with potential for extension to a number of other application areas.     

基于CFD技术的鼻腔输药的流动特性研究

鼻腔输药作为一种新颖的输药方式,具有方便可靠的特点,不仅可以适用于局部而且适用于全身用药,已经受到广泛的重视。但由于人类的呼吸道复杂的立体结构使得鼻腔输药成为生物医药研究的一个长期的挑战。利用CFD(计算流体动力学,Computational Fluid Dynamics)技术对鼻腔输药的流动特性进行研究,对一个基于真实的人类鼻腔解剖的3D模型的输药的流动过程进行了分析,着重研究了不同的药物颗粒的流动和沉淀特性。利用CFD的商用软件FLUENT在层流情况下对不同的密度、直径和流动速率的药物颗粒在鼻腔中流动进行了数值模拟,并对计算结果进行了比较分析。CFD研究的结果为鼻腔输药这种新颖的药物输送方式的优化设计提供了依据。     

双温度试验系统方案设计

结合双温度试验系统方案设计,介绍了可编程控制器在温度控制上的应用,有助于增进读者对PLC等的了解。     

加强会计信息与网络安全的措施

企业的会计信息，是企业的主要经济信息，由于在企业的生产经营活动中所占的重要地位及所起的重要作用，其安全性一直受到人们的重视。会计信息是否安全可靠，不仅关系到能否如实地反映企业的生产经营情况和财务状况，为企业经营管理提供可靠的会计信息，而且也影响到国家、企业和职工的经济利益。本文介绍了加强会计信息与网络安全的主要措施。     

Probing the era of galaxy formation via TeV gamma ray absorption by the near infrared extragalactic background

We present models of the extragalactic background light (EBL) based on several scenarios of galaxy formation and evolution. We have treated galaxy formation with the Press-Schecter approximation for both cold dark matter (CDM) and cold+hot dark matter (CHDM) models, representing a moderate (z _f 3) and a late (z _f 1) era of galaxy formation respectively. Galaxy evolution has been treated by considering a variety of stellar types, different initial mass functions and star formation histories, and with an accounting of dust absorption and emission. We find that the dominant factor influencing the EBL is the epoch of galaxy formation. A recently proposed method for observing the EBL utilizing the absorption of 0.1 to 10 TeV gamma-rays from active galactic nuclei (AGN) is shown to be capable of discriminating between different galaxy formation epochs. The one AGN viewed in TeV light, Mrk 421, does show some evidence for a cutoff above 3 TeV; based on the EBL models presented here, we suggest that this is due to extinction in the source. The large absorption predicted at energies > 200 GeV for sources at z > 0.5 indicates that observations of TeV gamma-ray bursts (GRB) would constrain or eliminate models in which the GRB sources lie at cosmological distances.Now at University of Chicago, Dept. of Astronomy & Astrophysics.     

翼型风洞侧壁干扰的数值模拟研究

运用Navier-Stokes数值模拟对翼型模拟试验对风洞侧壁干扰进行模拟，将简单代数湍流模型扩展用于机翼／风洞侧壁结合区流动，分析了风洞实验侧壁干扰问题的形成机理和影响翼型实验侧壁干扰的各种因素，如翼型展长、风洞侧壁边界层厚度及侧壁边界层抽吸等，对实验结果的影响，得出了一些有用的结论。计算格式空间采用中心有限体积离散，时间采用多步Runge-Kutta时间步长格式进行积分。计算结果证明了该方法的可行性和优越性。     

Discrete-time observability and estimability analysis for bearings-only target motion analysis

Observability in the context of bearings-only tracking (BOT) is still the subject of important literature. Different from previous approaches, where continuous-time analysis was considered, our approach relies on discrete-time analysis. It is then shown that this allows us to use directly and efficiently the simple formalisms of linear algebra. Using the direct approach, observability analysis is essentially reduced to basic considerations about subspace dimensions. Even if this approach is conceptually quite direct, it becomes more and more complex as the source-encounter scenario complexity increases. For complex scenarios, the dual approach may present some advantages essentially due to the direct use of multilinear algebra. New results about BOT observability for maneuvering sources are thus obtained. Observability analysis is then extended to unknown instants of source velocity changes. Even if observability analysis provides thorough insights about the algebraic structure of the BOT problem, the optimization of the observer maneuvers is essentially a control problem. Basic algebraic considerations prove that a relevant cost functional for this control problem is the determinant of the Fisher information matrix (FIM). So, a large part of this work is devoted to the analysis of this cost functional. Using multilinear algebra, general approximations of this functional are given. In order to involve only directly estimable parameters, the source bearing-rates are examined. Using these approximations, a general framework for optimizing the observer trajectory is derived which allow us to approximate the optimal sequence of controls. It is worth stressing that our approach does not require the knowledge of the source trajectory parameters and is still valid for a maneuvering source.     

Phase Space Density Analysis of Energy Transport in the Earth’s Magnetotail

Two energetic events in the Earth’s magnetotail detected by Geotail are examined with detailed analysis of three-dimensional velocity phase space density. It is found that the occurrence of multiple ion components is high during these dynamic episodes. Different populations evolve independently of each other, suggesting particles from multiple activity sites contributing to the observed phase space density. The transport properties with consideration of multiple components are evaluated, with the result showing significant differences from those based on a single fluid approach. This comparison indicates that precise evaluation of the energy and magnetic flux transport of energetic events in the magnetotail requires resolving individual populations in the phase space density.     

时效处理对Rene''220合金力学性能的影响

利用扫描电镜、拉伸试验机和蠕变实验机研究了不同时效制度下Rene’220合金室温及700℃的拉伸性能和700℃高温持久性能的变化规律。结果表明，随着一次和二次时效温度的升高，室温和高温强度呈下降趋势，而高温持久寿命随两次时效温度的变化均存在一个最大值，合金强度和持久性能最佳结合的时效制度为：830℃／4h／炉冷＋760℃／10h／空冷。