卫星编队飞行的无速度测量非线性鲁棒控制

本文基于带有界干扰的线性动力学模型，研究了卫星编队飞行中的相对位置控制问题。首先，在线性二次型最优控制的基础上，设计了一种非线性控制律，并使用李雅普诺夫稳定性理论证明了系统的稳定性。接着，通过对线性系统状态观测器进行改进，得到了一种非线性速度观测器，观测误差被证明是渐近收敛的。观测器与控制律的结合实现了无速度测量的控制，闭环系统被证明是渐近稳定的。文末的数值仿真验证了理论分析。     

Vibration and pulsation processes in feed systems of liquid rocket engines

Pulsation and vibration process in high speed centrifugal pumps and feed lines were investigated. Linear and quadratic relations between pulsation parameters and main factors were obtained. The investigation of turbopump low frequency oscillations showed that the intensity of pulsations is proportional to the pump specific linear size. Linear mathematic models with lumped parameters fairly well demonstrate the vibration influence on low frequency flow pressure vibrations in pumps and feed lines. It is shown that, in some conditions, the pressure oscillation amplitude distribution by the vibrating feed lines length may be characterized by the presence of a node in an intermediate section. A one-dimensional mathematic model based on wave equations proved to be suitable for calculations of vibration and pulsation parameters within a wide frequency range.     

燃气蒸汽式发射系统内弹道若干问题研究

通过对燃气蒸汽式发射动力系统的研究，总结出影响内弹道计算精度的若干因素，并就其中几个影响较大的问题进行了详细的分析，开发研制出了一套用于预估内弹道性能的系统化程序。通过实验数据的比较，验证了适用于内弹道计算的数学物理模型，为燃气蒸汽式发射系统设计提供参考依据。     

The cost benefits of the Spacelab system to scientific investigations and space applications

In the past, one of the major problems in performing scientific investigations in space has been the high cost of developing, integrating, and transporting scientific experiments into space. The limited resources of unmanned spacecraft, coupled with the requirements for completely automated operations, was another factor contributing to the high costs of scientific research in space. In previous space missions after developing, integrating and transporting costly experiments into space and obtaining successful data, the experiment facility and spacecraft have been lost forever, because they could not be returned to earth. The objective of this paper is to present how the utilization of the Spacelab System will result in cost benefits to the scientific community, and significantly reduce the cost of space operations from previous space programs.The following approach was used to quantify the cost benefits of using the Spacelab System to greatly reduce the operational costs of scientific research in space. An analysis was made of the series of activities required to combine individual scientific experiments into an integrated payload that is compatible with the Space Transportation System (STS). These activities, including Shuttle and Spacelab integration, communications and data processing, launch support requirements, and flight operations were analyzed to indicate how this new space system, when compared with previous space systems, will reduce the cost of space research. It will be shown that utilization of the Spacelab modular design, standard payload interfaces, optional Mission Dependent Equipment (MDE), and standard services, such as the Experiment Computer Operating System (ECOS), allow the user many more services than previous programs, at significantly lower costs. In addition, the missions will also be analyzed to relate their cost benefit contributions to space scientific research.The analytical tools that are being developed at MSFC in the form of computer programs that can rapidly analyze experiment to Spacelab interfaces will be discussed to show how these tools allow the Spacelab integrator to economically establish the payload compatibility of a Spacelab mission.The information used in this paper has been assimilated from the actual experience gained in integrating over 50 highly complex, scientific experiments that will fly on the Spacelab first and second missions. In addition, this paper described the work being done at the Marshall Space Flight Center (MSFC) to define the analytical integration tools and techniques required to economically and efficiently integrate a wide variety of Spacelab payloads and missions. The conclusions reached in this study are based on the actual experience gained at MSFC in its roles of Spacelab integration and mission managers for the first three Spacelab missions. The results of this paper will clearly show that the cost benefits of the Spacelab system will greatly reduce the costs and increase the opportunities for scientific investigation from space.     

AP复合固体推进剂燃烧模型

本文提出了一个复合固体推进剂的综合燃烧模型和相应的数学处理方法。该模型对凝聚相反应作了更细微的分析,特别重视和强调了各种热量传递对燃烧所起的作用,并以推进剂中处于连续相的粘合剂线性分解速度表示推进剂的线性燃速。根据此模型编制程序并进行了大量计算。计算结果与实验符合得很好。对AP/HTPB多级配推进剂的计算结果中,相对误差小于10％的占80％,对Ae/AP/HTPB推进剂则占90％以上。     

基于FrFT优化窗的STFT及非线性调频信号瞬时频率估计

瞬时频率(IF)是描述非平稳调频信号最基本的参数,调频信号广泛应用于声纳、雷达、通讯和生物等领域。本文采用分数阶Fourier变换来优化STFT的窗函数,并估计非线性调频信号的瞬时频率。进行了详细的误差理论分析。同时在实验上和Wingner分布(WVD)、短时Fourier变换(STFT)进行误差(MSE)比较分析。仿真证明,FrFt优化窗STFT对估计非线性调频信号的瞬时频率具有良好的性能。     

惯性导航/双星组合导航的可行性研究

根据国外惯性导航／卫星组合的研究、发展和应用情况，分析了惯性导航／双星组合的必要性和可实现性；提出了惯性导航／双星组合中存在的主要问题和可能的对策。研究结果表明，惯性导航系统(INS)和双星定位系统的组合是完全必要和可行的；惯性导航／双星组合系统的性能比纯惯性导航有明显提高。     

航天器振动试验中的动力吸振现象

振动环境试验是考验航天器中各分机力学品质的重要试验,分机适应力学环境的能力在设计阶段必须充分考虑。目前分机的力学环境条件往往是在考虑了一定的安全系数后,以分机安装处界面的加速度包络曲线给出的。然而一般来说,分机振动试验过程中的边界条件与分机实际工作状态的边界条件是不同的。具体地说就是在振动试验过程中分机通过试验转接托架与振动台面相连,实际工作状态是分机安装在安装件(卫星各舱板)上。由于试验转接托架与安装件的动力学特性不一样,根据多自由度弹簧质量阻尼系统的动力吸振原理,可以推出试验状态分机在固有频率处存在过试验现象。为了减少过试验对分机带来的危害,新的试验方法研究(加速度响应限幅控制、阻抗特性模拟法、限力技术等)已成为国内外航天工作者研究的热点。文章详细阐述了振动试验中动力吸振的机理及过试验产生的缘由。     

The effect of small vibrations on Marangoni convection and the free surface of a liquid bridge

The effects of small vibrations on Marangoni convection were investigated experimentally using a liquid bridge of 5 cSt silicone oil with a disk diameter of 7.0 mm, and an aspect ratio close to 0.5. Experiments were performed to determine the critical temperature difference data for no vibration case and with small vibrations applied. The experimental results have shown that the effect of small vibrations on the onset of oscillatory flow is small since the critical temperature difference data for different aspect ratios were not affected by the vibrations. To clarify the surface oscillation phenomena induced by external vibrations, a 3-D numerical simulation model was also developed using a level set algorithm to predict the surface oscillations of isothermal silicone oil bridges. By subjecting the liquid bridge to small vibrations, the surface oscillation characteristics were predicted numerically, and the numerical results compared well with the predictions of an analytical model proposed previously. Furthermore, the effect of small vibrations on the surface vibration amplitude of the liquid bridge is also discussed.