Benefits to world agriculture through remote sensing

Remote sensing of agricultural land permits crop classification and mensuration which can lead to improved forecasts of production. This technique is particularly important for nations which do not already have an accurate agricultural reporting system. Better forecasts have important economic effects. International grain traders can make better decisions about when to store, buy and sell. Farmers can make better planting decisions by taking advantage of production estimates for areas out of phase with their own agricultural calendar. World economic benefits will accrue to both buyers and sellers because of increased food supply and price stabilization.

This paper reviews the econometric models used to establish this scenario and estimates the dollar value of benefits for world wheat as 200 million dollars annually for the United States and 300–400 million dollars anually for the rest of the world.     

Flow of a water jet into vacuum

At certain intervals excess water has to be dumped into space overboard of the Spacelab cabin. For the development of a useful nozzle the behaviour of a water jet flowing into vacuum was investigated experimentally and theoretical interpretations of the flow phenomena which were found are given. The influence of parameters like the shape of the nozzle, the temperature and the gas content of water were studied. At certain test conditions, the jet leaves the nozzle exit in bundled form and ends abruptly bursting into droplets and ice-particles. The “bursting”-mechanism is explained by a sudden boiling of the water in the jet causing the growth of vapor bubbles decomposing the jet. The formation of vapor bubbles is initiated by a superheating of the water of the jet caused by a sudden pressure drop and a cooling at the surface of the jet. The expansion of vapor bubbles in the jet is retarded by surface tension forces which results in a relaxation time for the bursting of the jet. The vapor flow in radial directions of the jet is approximately described by a plane radial source flow. The measurement of the pitot-pressure radially to the jet proves that the vapor flow is supersonic.     

Interaction onde de choc-couche limite laminaire sur un corps de revolution en rotation

(Shock Wave-Laminar Boundary Layer Interaction on a Spinning Axisymmetric Body)—A method is developed to predict the shock wave-laminar boundary layer interaction on an axisymmetric body spinning in axial flow. The integral scheme of Lees, Reeves and Klineberg is used. The Falkner Skan “type” equations is then established for the boundary layer on spinning cylinder and used to construct the polynomial representation of the integral quantities. The independence of the polynomials with respect to the spinning rate is demonstrated. A cylinder of 200 mm diameter with a flare is built and tested up to 5000 rmp in wind tunnel at M = 2.21. The pressure measurements are in good agreement with the theoretical results. The rotation induces the decreasing of the pressure level and boundary layer separation inside the interaction region.     

Soviet proposals on the militarization of space

The USSR has submitted several proposals to the United Nations in recent years which are aimed at avoiding the militarization of outer space. This article examines three of the proposals and evaluates them in the context of existing treaties, to see whether or not they could resolve the political and legal problems which might arise. The reactions of the United Nations General Assembly and individual nations are also considered. The author concludes that several questions regarding the military aspects of space activity are left unresolved by the Soviet proposals.     

小议接地技术的应用

随着民航空管基础设施的发展,大量的电子、电气、通信设备系统获得了越来越广泛的应用。运行中的电子、电气、通信设备大多伴有电磁能量的转换,高密度、宽频谱的电磁信号充满了我们周围的环境,构成了极其复杂的电磁环境。为了确保通信系统、控制系统和计算机系统在这样的电磁环     

塞式喷管多参数性能优化计算

从影响塞式喷管推力性能的因素中总结出内喷管倾角，内膨胀比、总膨胀比，燃气总压和飞行高度这五个主要因素，并以推力最大为目标函数运用枚举和逐层优化的方法对上述五个参数的取值进行优化计算，提出了对这五个参数进行优化取值的方法并得到了相关结论，其结论可为实际的塞式喷管发动机设计研制提供部分的理论依据。指导相关设计参数的确定。     

最少燃料消耗的固定推力共面轨道变轨研究

本文研究了推力固定条件下，从圆轨道进入共面圆轨道一次入轨最节省燃料的推力方向控制策略。这类问题都可归结为两点边值问题，对自由初值的选取作了讨论，并采用打靶法迭代求解。计算了从停泊轨道到同步转移道以及两个过地圆轨道之间的最优转移，获得满意的结果。     

蜂窝夹层结构常见制造缺陷分析

蜂窝夹层结构已成为卫星结构设计中广泛应用的重要材料。基于蜂窝夹层结构制造过程的复杂性和不可逆性，注重工艺控制对产品质量的保证是非常重要的。文章对蜂窝夹层结构制造过程中，由于工艺条件不当造成的缺陷和改进方法进行了分析。     

离心加速声中液态浸渗纤维预制体动力学分析

在将纤维预制体视为“毛细管束”的基础上,采用达西定律建立了离心加速场中金属液浸渗纤维预制体的浸渗动力学模型。采用该模型分析了离心加速场中金属液浸渗纤维预制体的临界转速,考察了金属液浅注量、设备转速、铸件高度、金属液原如外半径以及纤维预制体孔隙率对离心加速场中金属 浸润纤维预制体的影响。结果表明,金属液浸润纤维预制体的临界转速只与临界压力、金属液的浇注量、铸件高度以及纤维预制休性质有关;增加金属液浇注量、设备转速及金属液原始外半径,降低铸件高度、预制体纤维体积分数,有利于金属液的浸渗。     

成像光谱仪编程选择波段数据采集系统的研究

随着成像光谱仪的发展,遥感数据量越来越大,这对电子学系统中的数据采集、传输和处理带来了一定的困难。基于目前技术和数据的实用性两方面考虑,采用编程选择波段的方法能够很好地解决数据量日益增大的问题,国内外的一些方案中已经对此有了一定的设想,即通过遥控指令改变波段数目、光谱取样间隔或波段的重组,这一切都要求有一个灵活性强、通用性好的数据采集系统,能够对不同的选择情况正确地收集用户所需的数据。文中对数据采集的可行性进行了研究,并提出了一个较为容易实现的方案。