Application of high-order accurate methods to solve the computational gas dynamics and aeroacoustics problems

The application of the low dissipative high-order accurate scheme for numerical solution of the Euler and Navier-Stokes equations in the two-dimensional statement is considered. The scheme of calculating space derivatives is the seven-point central-difference approximation of the fourth order with the coefficients optimized to reduce the dispersion errors. The optimized six-step Runge-Kutta method is used for evaluating the time derivatives. By means of filtration, spurious pulsations are suppressed and shocks are processed. The results of verifying the calculation scheme realized on the stationary problem of flow around the model turbine blades are presented.     

某型教练机嵌入式训练系统顶层设计技术研究

本文通过对该型教练机现有航空电子系统构型、驾驶员操作程序、接口控制文件深入研究,结合未来功能扩展需求,给出了合理的系统构型分析、功能分配、数据流规划、原相关系统软件改动分析,在此基础上还设计出了嵌入式训练系统技术方案.依据方案研制的嵌入式训练系统原理样机通过系统动态试验、航电系统地面综合试验和飞机地面通电试验,证明系统...     

A software package for computer-aided design analysis of thin-walled structures from composite materials

An algorithm of analyzing the design parameters for a thin-walled wing from composite material based on the efficient distribution of structural material between load-carrying elements is described. We consider the problems of convergence acceleration for the iteration design analysis. Also presented are the examples of determining the design parameters for a superlight aircraft wing and the rational parameters of the filler in the form of a three-dimensional rod structure.     

Water feed influence on nitric oxide emission under oxidation of near-stoichiometric air-methane mixtures

We considered the influence of temperature on the nitric oxide emission under combustion of the near-stoichiometric mixtures with and without water feed. We revealed the advantage of the method of fuel-water-air mixture combustion over that of the leaned mixture combustion.     

正反顺序加载下安装边螺栓预紧力分散度的数值模拟与试验验证

在航空发动机机匣安装边装配过程中,不同位置螺栓之间会产生弹性交互作用,不同加载方案会使装配后的螺栓预紧力存在一定的分散度。针对这一问题,建立了3层带止口机匣安装边3维接触有限元模型,研究不同加载方案下螺栓预紧力的施加方法。基于有限元模型数值模拟了3层机匣安装边分别在顺序加载方案、交叉加载方案和正反顺序2轮加载方案下螺栓预紧力的分散度。搭建了相应的试验装置,分别对3种加载方案的预紧力分散度进行试验验证。结果表明：采用正反顺序2轮加载后的螺栓预紧力分散度最小,在3层止口机匣安装边上采用正反顺序2轮加载方案后的螺栓预紧力分散度较小,在有限元仿真中螺栓预紧力分散度为2.43%,在试验中螺栓预紧力分散度为4.98%。采用此方案加载后,止口机匣安装边能达到更好的密封效果和较好的刚度对称性。     

考虑陀螺效应的转子动力学相似准则

针对考虑陀螺力矩的转子系统缩尺相似模型与原型是否满足动力学相似的问题,采用量纲分析法推导了考虑陀螺力矩的转子-简单支撑系统相似准则,得到了模型与原型各物理量相似比.通过求解不同相似比下Jeffcott转子系统临界转速的解析解,和利用有限元软件ANSYS对某转子系统临界转速和振型相似性进行了数值模拟,验证了所推导的考虑陀螺力矩转子系统相似准则的正确性.研究表明:考虑陀螺力矩、简单支撑和Rayleigh比例阻尼的转子系统,在相似转速下缩尺模型与原型的固有频率具有相似性,并且临界转速相似.      

气动发动机输出扭矩无因次分析

针对气动发动机的工作过程,利用能量方程、气体状态方程、连续性方程及运动过程方程建立气动发动机的非线性微分方程组.选取合适的基准量,对所建立的微分方程组进行无因次化,得到无因次化的数学模型.利用MATLAB/Simulink仿真工具,对无因次数学模型进行研究,得到各无因次量对气动发动机输出扭矩的影响.从仿真结果可以看出,气动发动机的无因次转速、进气门面积比例因子、排气门面积比例因子以及进气持续角度对气动发动机的无因次输出扭矩影响较大.当发动机转速升高扭矩急剧下降时,可以通过调整进气门面积比例因子、排气门面积比例因子以及进气持续角度使输出扭矩恒定.     

基于支持度的MEMS陀螺信息融合方法

为了解决微机械电子系统(MEMS, micro electronic mechanical system) 惯性器件测量准确度低、噪声大、长时间单独使用导航误差积累大等缺点,提出了一种MEMS陀螺阵列结构设计,在完成微型惯性测量单元(MIMU, micro inertial measurement unit)的标定后,采用基于支持度的信息融合方法对陀螺阵列输出进行信息融合。试验结果表明：该结构设计和信息融合方法能够有效的提高MIMU的测量准确度,具有一定的工程应用价值。     

空间实验室大面积太阳电池阵技术研究

介绍了空间实验室大面积太阳电池阵的方案构型，并进行了模态分析、热结构耦合分析和动力学仿真分析。生产出了全尺寸的集成演示样机，进行了展开试验、主展开机构的模态试验，以及半刚性太阳电池板和二自由度驱动机构的振动试验。计算和试验结果表明，技术方案是可行的。     

Fe/O Ratios in Interplanetary Shock Accelerated Particles

It is widely accepted that diffusive shock acceleration is an important process in the heliosphere, in particular in producing the energetic particles associated with interplanetary shocks driven by coronal mass ejections. In its simplest formulation shock acceleration is expected to accelerate ions with higher mass to charge ratios less efficiently than those with lower mass to charge. Thus it is anticipated that the Fe/O ratio in shock-accelerated ion populations will decrease with increasing energy above some energy. We examine the circumstances of five interplanetary shocks that have been reported to have associated populations in which Fe/O increases with increasing energy. In each event, the situation is complex, with particle contributions from other sources in addition to the shock. Furthermore, we show that the Fe/O ratio in shock-accelerated ions can decrease even when the shock is traveling through an Fe-rich ambient ion population. Thus, although shock acceleration of an Fe-rich suprathermal population has been proposed to explain large Fe-rich solar particle events, we find no support for this proposal in these observations.