A combined turbulent combustion model in studying a lean flameout process

A modification of the Zimont turbulent combustion model is presented; the modification makes it possible to describe processes in diffusion and homogeneous flame fronts as well as to take into account the influence of different factors that cause flame destabilization. The model is based on the equation for a reaction completeness extent (completeness of combustion). The model realization to simulate the premixed combustion is described and the modification of the turbulent combustion model is applied to simulate a process of flameout downstream of the flameholder.     

Experimental studies of the impulsive ultrasonic machining by a tool with an intermediate striker

Some experimental data on the process of impulsive ultrasonic machining are presented. Also given are the data on variations in the impulsive vibration frequency of a workpiece and a tool.     

飞机进气道锤击波载荷评估方法研究

进气道锤击波载荷是由航空发动机喘振超压引起的,其峰值压力可达到自由来流总压的2倍量级,为进气道结构设计的最大载荷。为了给新研飞机进气道设计提供最大载荷依据、降低结构质量,对增压比等影响发动机喘振超压的因素进行归纳总结,并进行了实测和评估分析,认为锤击波压比值的上限是由稳态压力畸变引起的喘振确定的,最大锤击波载荷基本上随发动机压比的增大呈线性增大;分析了锤击波载荷的特征和评估曲线,认为通过积累新研发动机地面试验数据和CFD手段可有效解决飞机设计的载荷输入,应用概率统计方法可有效降低复合材料结构的大"S"弯进气管道结构质量。     

直扩测控系统抗多址能力分析与验证

为了防止多址干扰造成接收机出现误捕和假锁,改善直接序列扩频测控系统抗多址干扰性能,在Gold码特性和扩频接收机性能分析的基础上,结合最大似然原理,对采用扩频体制测控系统的抗干扰能力进行了分析。为契合工程应用,采用仿真遍历结合理论分析的方式,对Gold码的互相关抑制能力理论值进行了工程修正。在分析捕获阶段的抗干扰捕获门限后,还分析了载噪比估计结果在正常锁定和假锁两种状态下的差异,给出了接收机对假锁状态的判决方法和门限。根据分析和仿真的结果,给出了系统设计约束条件和优化的接收机设计流程,作为测控系统和接收机设计的参考。     

民用飞机不同商载配置对机身着陆载荷的影响分析

重量分布和重心位置是影响起落架和机体地面载荷的重要因素,其中商载是影响全机重心、惯量的最活跃因素。飞机实际运营中,有无穷多种商载分布及装载方案。为了确保机身载荷分析时,不遗漏严重设计情况,同时能大大减少载荷人员的工作量,本文对不同商载配置下的机身着陆载荷进行了研究分析,分析结果表明最大商载情况将构成机身垂直剪力和垂直弯矩的严重情况。因此,在进行机身载荷分析时,必须考虑最大商载情况,而最大燃油情况可以不必考虑。这一结论为今后有针对性的开展民机机身载荷分析提供了数据支持。     

Technique of integral diagnostics for a radio-frequency inductively coupled plasma discharge unit of an RF ion thruster

A technique of integral diagnostics for an RF inductively coupled plasma gas discharge unit of an ion thruster is proposed. This technique includes a priori measurements of antenna coil electrical parameters in free space and in assembled state as well as experimental determination of the antenna coil currents with and without discharge.     

并行工程在商用飞机研发项目中的益处及其实施方法

使用较少经费和较短时间研发出质量优越的商用飞机是各飞机研发团队的共同目标。阐述了通过使用科学的方法和管理技术,例如并行工程,是商用飞机研发项目达成上述目标的途径之一,介绍了一种具备可操作性的实施并行工程的方法。     

The Seed Population for Energetic Particles Accelerated by CME-Driven Shocks

Understanding properties of solar energetic particle (SEP) events associated with coronal mass ejections has been identified as a key problem in solar-terrestrial physics. Although recent CME shock acceleration models are highly promising, detailed agreement between theoretical predictions and observations has remained elusive. Recent observations from ACE have shown substantial enrichments in the abundances of ³He and He⁺ ions which are extremely rare in the thermal solar wind plasma. Consequently, these ions act as tracers of their source material, i.e., ³He ions are flare suprathermals and He⁺ ions are interstellar pickup ions. The average heavy ion composition also exhibits unsystematic differences when compared with the solar wind values, but correlates significantly with the ambient suprathermal material abundances. Taken together these results provide compelling evidence that CME-driven shocks draw their source material from the ubiquitous but largely unexplored suprathermal tail rather than from the more abundant solar wind peak. However, the suprathermal energy regime has many more contributors and exhibits much larger variability than the solar wind, and as such needs to be investigated more thoroughly. Answers to fundamental new questions regarding the preferred injection of the suprathermal ions, the spatial and temporal dependence of the various sources, and the causes of their variability and their effects on the SEP properties are needed to improve agreement between the simulations and observations.