Capillary brazing under microgravity (TEXUS-II) and 1g conditions

Experiments of vacuum brazing under both microgravity and 1-g conditions show the effect of hydrostatic pressure on ga-filling. The absence of buoyancy forces under microgravity affects the microstructure of the solidified braze in the joint.     

Comparative analysis of Venusian ionosphere dual-frequency radio soundings with the satellites Venera-9, 10 and Pioneer-Venus

A comparison of the Venusian ionosphere electron density profiles obtained by the dual-frequency radio occultation method for the satellites Venera-9,10 (1975) and the Pioneer-Venus orbiter (1978–1979) has been carried out. It is shown that the general nature of the profiles, the main maximum heights and electron densities, the ionopause height positions determined with the satellites Venera-9, 10 on the one hand and Pioneer-Venus orbiter on the other hand are in good agreement. This fact testifies to the reliability of the experimental dual-frequency radio occultation data. An attempt to compare the radio occultation data with the direct measurements points out the essential contradictions between them, which need detailed analysis and discussion.     

Proposal for a reference model of the middle atmosphere of the southern hemisphere

Available rocketsonde information has been used to compile tables of monthly mean temperature, pressure, density and zonal wind for the middle atmosphere of the southern hemisphere with the purpose of revising similar tables presented to COSPAR earlier. The altitude range is 25 to 80 km in steps of 5 km. The latitude range is 0° to 70°S with a 10° step. The compatability of different sets of temperature measurements is discussed. Mean values of temperature, pressure and zonal wind obtained for the southern hemisphere are compared with northern hemisphere model values. Large differences between the hemispheres (up to 20°C in temperature, 20–30% in pressure, 30–50 m/s in wind) imply that reference atmospheres such as CIRA should be complemented by southern hemisphere climatology.     

Thin-film Li-LiMn2O4 batteries

Thin-film rechargeable Li-LiMn₂O₄ batteries have been fabricated and characterized. Following deposition by electron beam evaporation of LiMn₂O₄, the amorphous as-deposited cathode films 1 cm² in area by 0.3to 4-μm thick were annealed at 700°C to 800°C in oxygen in order to form the crystalline spinet phase. The specific capacity of the cells between 4.5 V to 3.8 V ranged from 50 μAh/mg to 120 μAh/mg. When cycled over this range, the batteries exhibited excellent secondary performance with capacity losses as low as 0.001% per cycle. On charging to 5.3 V, a plateau with a median voltage of 5.1 V was observed. The total charge extracted between 3.8 V to 5.3 V corresponded to about 1 Li/Mn₂ O₄     

Preflare heating of filaments

Disappearances of preflare filaments have been observed on June 22, 1980 (S07,W13) (flare at 13.04 U.T.) and September 3, 1980 (flare at 7.52 U.T.). The analysis of MSDP data (MEUDON) leads to the followings conclusions : - Disappearances begin a few minutes before the Hα impulsive phase. - The filaments can be seen again after the flares. - Upwards motions occur in several points, without disturbing significantly preëxisting downflows.Velocity maps suggest shears or velocity loops.The filament disappearance seems to be due to a heating mechanism beginning before the flare maximum.     

Interaction of artificially injected plasma flows with ionospheric plasma

Results of rocket experiments on study of plasma flows (PF) artificially injected by sources separated from vehicles and their effect on medium parameters in ionosphere at altitudes 160:230 km are presented.PF were injected comprising lithium ions with velocities 1,2 x 10⁴ m/sec. and cesium-potassium ions with velocities (1,4–1,5)x10³ m/sec. Mass flow rate in case of lithium PS is 2 mg/sec, and in case of cesium-potassium PS is 0,2 g/sec. During experiments mass-spectrometer measurements of ion medium content in ranges of different ion masses were held, disturbancies of electric fields with frequencies up to 20 kHz and electron flows with energies 0,7keV, 4,6keV and over 40 keV were controlled at distancies from 150m to (500–600)m between plasma source and scientific equipment.     

Synoptic observations of coronal transients and their interplanetary consequences

A small coronagraph has been placed in orbit to monitor the sun's outer corona from 2.5 to 10.0 solar radii, and five years of nearly continuous synoptic observations have now been completed. Rapid and sensitive image processing techniques have been developed to screen the data for transient phenomena, particularly coronal mass ejections (CMEs). About 50,000 coronal images have been examined, out of a five-year total of 68,000, and a standardized listing of more than 1,200 coronal transients for the period 1979–1982 has been prepared. These data have been analysed in the light of other available information, particularly on conditions in the interplanetary plasma. The dynamical characteristics of the active corona, as they are beginning to emerge from the data, are presented. We find that coronal mass ejections exercise significant influence on the interplanetary solar wind. They are the source of disturbances that are frequent and energetic, that tend to be somewhat focussed, that often reach shock intensity, and that propagate to large heliocentric distances, sometimes causing major geomagnetic storms.     

A review of long drop tubes as a supplement/alternative to space experiments

The 100 meter high drop tube at the Marshall Space Flight Center has proven to be a viable facility for studies of containerless solidification. Advantages are that experiments are inexpensive and large numbers of specimens can be processed rapidly. It would not be unusual to run ten specimens in a day. Another significant advantage is that the undercooling behavior can be followed with sufficient sensitivity to easily detect the onset of recalescence and subsequent events.Disadvantages are the restrictions on specimen sizes and types of alloys that can be run in a microgravity environment. Practical specimen sizes range between 50 mg and 500 mg depending on the type of furnace being used. Refractory alloys can be processed in a vacuum (about 10^?5 torr) and therefore at microgravity. Non-refractory alloys demand an atmosphere (about 200 torr) to obtain appreciable undercooling before impact at the bottom of the tube. Under these conditions significant g forces result.Because of the present limitations of the 100 meter drop tube, the most definitive work has been done on niobium based alloys. Large amounts of undercooling have been observed routinely and the effects of undercooling on microstructure have been characterized in detail. X-ray diffraction, scanning electron microscopy, and transmission electron microscopy have been used to determine types of phases, amounts of phases, and compositions of phases. It is clear, as would be expected, that the results bear some resemblance to rapid solidification processing by quenching. However, there are dissimilarities due to the uniqueness of solidification by deep undercooling without quenching in long drop tubes and accompanying recalescence effects.     

IR-spectroscopy of ionosphere from stratospheric balloons

The radiation spectra of the ionosphere in the 4–5 μm region have been determined from stratospheric balloons by means of the specially elaborated method of the registration of angular and spectral distribution of the radiation. The radiation bands of 4.4 μm and 4.8 μm which have 0.1–0.2 erg cm^?2 sr^?1s^?1. brightness obtained in two flights, are identified with the vibration-rotation transitions of the ion NO⁺ (0 - 1) and the molecules N¹⁴N¹⁵ (0 - 1) and CO (0 - 1) and (3 - 2) from altitudes between 120 and 500 km.     

Electromagnetic containerless undercooling facility and experiments for the shuttle

An electromagnetic furnace is being prepared for flights aboard the space shuttle. This apparatus is capable of melting metals and alloys up to 1400°C melting point by induction heating with subsequent solidification of the freely levitated melt without contact with any container. The solidification can be carried out with greatly reduced fields resulting in minimal heating and stirring of the free melt. Sequential specimens can be processed during flight. Several experiments are planned for a series of flights, beginning in 1985 with an undercooling experiment on NiSn alloys. These will be interspersed with detailed studies of fluid flow caused by low and high field levels in order to quantify the corresponding effect upon the solidification process.