基于环形切割器的串联战斗部隔爆结构的优选

硬质聚氨酯具有刚度小、材质松散、易于吸收爆炸能量的特点,是一种很好的隔爆材料。为了设计环形切割器与后级随进战斗部之间的隔爆装置,利用LS-DYNA分别进行了圆柱型、圆锥型、球缺型3种聚氨酯隔爆体的数值模拟研究。通过研究得出结论:球缺型结构既节省材料,又可以更有效地降低前级产生的冲击波对后级战斗部的影响。该结论有助于带环形切割器串联战斗部的隔爆设计。     

直扩测控系统抗多址能力分析与验证

为了防止多址干扰造成接收机出现误捕和假锁,改善直接序列扩频测控系统抗多址干扰性能,在Gold码特性和扩频接收机性能分析的基础上,结合最大似然原理,对采用扩频体制测控系统的抗干扰能力进行了分析。为契合工程应用,采用仿真遍历结合理论分析的方式,对Gold码的互相关抑制能力理论值进行了工程修正。在分析捕获阶段的抗干扰捕获门限后,还分析了载噪比估计结果在正常锁定和假锁两种状态下的差异,给出了接收机对假锁状态的判决方法和门限。根据分析和仿真的结果,给出了系统设计约束条件和优化的接收机设计流程,作为测控系统和接收机设计的参考。     

民用飞机不同商载配置对机身着陆载荷的影响分析

重量分布和重心位置是影响起落架和机体地面载荷的重要因素,其中商载是影响全机重心、惯量的最活跃因素。飞机实际运营中,有无穷多种商载分布及装载方案。为了确保机身载荷分析时,不遗漏严重设计情况,同时能大大减少载荷人员的工作量,本文对不同商载配置下的机身着陆载荷进行了研究分析,分析结果表明最大商载情况将构成机身垂直剪力和垂直弯矩的严重情况。因此,在进行机身载荷分析时,必须考虑最大商载情况,而最大燃油情况可以不必考虑。这一结论为今后有针对性的开展民机机身载荷分析提供了数据支持。     

并行工程在商用飞机研发项目中的益处及其实施方法

使用较少经费和较短时间研发出质量优越的商用飞机是各飞机研发团队的共同目标。阐述了通过使用科学的方法和管理技术,例如并行工程,是商用飞机研发项目达成上述目标的途径之一,介绍了一种具备可操作性的实施并行工程的方法。     

对K8飞机外贸出口工作的几点思考

简要论述了K8飞机外贸出口所处的内、外部环境,在此基础上进行SWOT分析,并据此提出该飞机外贸出口工作中应采取的几项措施。     

Modeling of the very high velocity impact process with respect to in-situ ionization measurements

This overview deals with very high impact velocities, where complete vaporization of an impacting cosmic dust particle is to be expected upon expansion from the high pressure high temperature state behind the stopping shock (v > 15 km/s). The topics discussed are the mechanics and thermodynamics of compression, adiabatic release, equation of state and nonequilibrium states upon expansion. The case of very high particle porosity (ρ 1 g/cm³) and the case of very small dust masses (m < 10⁻¹⁷ g) are discussed from what one presently knows. The possibility of three body collisions in the expanding gas phase is discussed briefly. The effect of oblique impact is discussed with respect to its relevance to the ionization process. The numbers communicated are up to the highest “experimental” impact velocities (80 km/s, Halley mission). As one goes to lower impact velocities (20 < v < 30 km/s) there is still complete vaporization of the dust particle but ionization out of the bulk of the particle becomes low. Other than thermal processes may become important. Ideas are outlined to understand their physical nature.     

多媒体煤矿安全监测管理系统研究

介绍了现有的煤矿安全监测和安全考勤管理系统的特点及缺陷，探讨了如何将多媒体计算机技术应用于煤矿安全监测管理系统。该系统具有实时监视、紧急救援和事故分析三大特点。     

论高校医院与全科医学

保证高校教职工、大学生的身心健康,是高校医院义不容辞的责任.为此,应探索一条更适合高校实际情况的医疗模式.本文就高校医院应如何为师生员工提供全方位的医疗保健服务进行了初步探讨.     

Survival and alteration of the plasmid-containing microorganism Escherichia coli Z905/pPHL7 introduced into manmade closed aquatic microcosms.

It has been demonstrated that the transgenic microorganism Escherichia coli Z905/pPHL7 (AprLux+) can exist for a long time at an elevated concentration of mineral salts. The microorganism was introduced into microcosms with sterile brackish water (salinity variable from 21 to 22 g l-1) taken from Lake Shira (Khakasia, Russia). The survival of the microorganism was estimated both by measuring the growth of the colonies on solid nutrient media and by the bioluminescence exhibited by the transgenic strain in samples from the microcosms and in the enrichment culture with the added selective factor-ampicillin (50 micrograms/ml). In the enrichment culture, the bioluminescent signal was registered through the 160-day experiment. It has been shown that in the closed microcosms with brackish water the E. coli strain becomes heterogeneous in its ampicillin resistance. The populations of the transgenic strain were mainly represented by isolates able to persist in the medium containing 50 micrograms/ml, but there were also the cells (about 10%) with the threshold of ampicillin resistance not more than 0.05 micrograms/ml. Thus, it was shown that in the microcosms with brackish water and in the absence of the selective factor the transgenic strain survives and retails the recombinant plasmid.