民用飞机厨房智能配电方法研究

民用飞机厨房配电方法对于降低电源系统设计容量和减轻飞机重量起着重要的作用。在分析飞机厨房设备两种耗电模型的基础上,提出了民用飞机厨房智能配电方法 ,并分析了厨房设备的智能工作流程、用电请求级别和用电设备优先级。对国产某型支线飞机的厨房系统运用该方法进行了配电设计验证。结果表明,厨房设备需求的总功率仅为传统设计方法所需功率的30.9%。     

Approximate technique of tip vortex account in calculating a helicopter main rotor

We present the materials, which substantiate the application of a rather simple approximate method of accounting for disturbances of the airflow around the helicopter main rotor blades; in this case, the disturbances are caused by vortices that come down from the blade ends. It is shown that these disturbances influence significantly the varying blade loads.     

Investigation of the motion of (99942) apophis asteroid using the SKIF cyberia multiprocessor computing system

We present the results of investigation of the dynamics of (99942) Apophis asteroid, which will undergo a very close encounter with the Earth on April 13, 2029. The region of possible motions of the asteroid is considered on the time interval (2004, 2040). In addition, it is shown that an increase of the observational interval (2004, 2006) until 2008 allowed us to reduce significantly the area of possible motions. All investigations were performed by numerical methods with the help of algorithms and software developed by us in the environment of parallel programming using the SKIF Cyberia multiprocessor computer of the Tomsk State University.     

Decision-making of Aircraft Optimum Configuration Utilizing Multidimensional Game Theory

As multi-discipline coupling and components interference often affect the aircraft configuration decision-making and analysis during conceptual design process, this article presents an approach of multidimensional game theory based on aircraft components to deal with this problem. The idea is that the configuration decision-making process is regarded as the game for different disciplines and technologies, and the aircraft components are players. The payoff function with highest total gain means that according to the game protocols and multidimensional theory, the optimal aircraft configuration within the strategy set will be chosen. The decision-making model is applied to conceptual design process of the high altitude long endurance (HALE) unmanned aerial vehicle (UAV) based on the assessment of technological risk. The obtained optimum configuration is quite consistent with the current HALE UAV development trends. Thus, taking into account the coupling and interference factors, the multidimensional gaming model based on aircraft components will be an effective analysis method in the decision-making process of aircraft optimum configuration.     

欧空局OPSNET通信网新进展

为了支持我国航天测控通信网的IP(互联网协议)化以及未来发展,对欧空局的航天任务操作通信网OPSNET(操作支持通信网)的新进展进行了研究。首先回顾了OPSNET网络发展历程中的里程碑事件(完成网络IP化,调整网络拓扑结构,通过载荷分担模式超越网络链路的带宽极限),之后介绍了该网络面临的高数据速率挑战及多个备选解决方案,详细介绍了最终选用的基于MPLS(多协议标签交换)技术的网络设计。OPSNET网络向MPLS迁移的方案经实验室环境验证后分步实施,经多个层面的验证及实际运行证明,采用MPLS技术后,以较低的成本实现了很好的网络性能。未来OPSNET将以此为基础部署更多的MPLS链路,并可能增加加密业务。OPSNET通信网的新进展值得我们关注和借鉴。     

Multi-objective Optimization Method for Automatic Drilling and Riveting Sequence Planning

 There are numerous riveting points on the large-sized aircraft panel, irregular row of riveting points on delta wing. It is es-sential to plan the riveting sequence reasonably to improve the efficiency and accuracy of automatic drilling and riveting. Therefore, this article presents a new multi-objective optimization method based on ant colony optimization (ACO). Multi-objective optimization model of automatic drilling and riveting sequence planning is built by expressing the efficiency and accuracy of riveting as functions of the points’ coordinates. In order to search the sequences efficiently and improve the quality of the sequences, a new local pheromone updating rule is applied when the ants search sequences. Pareto dominance is incorporated into the proposed ACO to find out the non-dominated sequences. This method is tested on a hyperbolicity panel model of ARJ21 and the result shows its feasibility and superiority compared with particle swarm optimization (PSO) and ge-netic algorithm (GA).     

Solid nanomembrane manufacture using ion-plasma action

A process of manufacture of porous membranes made of aluminum foil (Al 99.99%) by the method of electrochemical anodic oxidation followed by a continuous barrier layer removal with ion-plasma irradiation is described. The membranes having a 8 mm diameter made from AL2O3 with a thickness from 2 to 5 microns thick with a regular channel arrangement are obtained. A possibility to change the channel diameter in the range of 20?C100 nm by adjusting voltage and temperature during the oxidation is shown. We present the experimental dependencies of aluminum and aluminum oxide sputtering coefficients on the energy and incidence angle of xenon ions within the energy range of 100??400 eV.     

Comparative analysis of mixing chambers for two multiphase flows of oppositely charged particles

In this paper, we formulated the criteria for evaluating the effectiveness of mixing chambers, needed in obtaining polymeric materials with reproducible properties. The results of comparative analysis of organizing the methods for mixing two multiphase flows of oppositely charged particles are presented. This analysis, carried out using CFD programs, shows that the mixing chamber construction in which the flows being mixed are directed at an angle to each other, and additional gas flow inlets are provided in the lateral wall, is the most efficient.     

Experiments with injection of powerful plasma jet into the ionosphere

This paper describes two rocket experiments “Aelita” with high power lithium plasma injection. The results of onboard magnetometer, massspectrometer, photometer, plasma, corpuscular and ground radar measurements are given. Dynamics and structure of plasma formation are discussed.     

Ray Based Diffraction Tomography of the Ionosphere and Laboratory Inhomogeneous Plasma

A new procedure for restoration of the plasma inhomogeneities with improved resolution is suggested. The procedure deals with the double weighted Fourier transform (DWFT) of the observed wavefield in coordinates of both receivers = (x, y) and sources ₀ = (x ₀, y ₀) [1]. Phase increments between the sources and receivers, being found from DWFT representation, can be used for extracting information on small perturbations of the dielectric constant ~(, z) in a way similar to traditional radio tomography. The resulting resolution of the method is close to the diffraction limit = h/D in the horizontal direction and z = (h/D)² in the vertical direction, where h is the height of inhomogeneities and D is the length of the ground-based receiving system.