基于Bulk MicroMegas探测器的高能中子束空间分布测量

为验证中国原子能科学研究院（CIAE）自研的100 MeV回旋加速器中的高能中子束是否符合设计要求,利用自研的Bulk MicroMegas微结构气体探测器对该加速器中子场的空间分布进行了首次试验测量。首先通过模拟计算得到不同厚度聚乙烯（PE）转化膜对不同能量高能中子的转化效率、反冲质子的动能谱与角通量谱、反冲质子在 Bulk MicroMegas气体探测器内的沉积能量谱以及中子与探测器结构物质反应产物占比等;然后利用Bulk MicroMegas探测器测量该回旋加速器产生的高能中子场在不同能量和距离处28个点位的中子通量分布,并根据通量分布计算中子束斑半径。结果表明,Bulk MicroMegas微结构气体探测器可以实现对高能中子场束斑边界成像,中子通量随束斑半径的变化关系符合常见束斑边界拟合函数;束斑半径测量结果与模拟计算结果接近。     

翼面隐身结构优化设计

隐身结构是指由蒙皮和多种内部材料组成的、能满足承载要求、并具有明显降低雷达散射截面的结构.本文首先阐述了一种典型的翼面隐身结构方案.为了进一步挖掘该隐身结构减缩RCS的潜力,应用基于代理模型的优化策略,对其进行电磁散射特性优化设计.研究结果表明,经过优化设计后,在方位和频域上能显著降低翼面隐身结构RCS.基于代理模型的优化策略是一种有效的隐身结构低RCS优化策略.     

高强高模聚乙烯纤维对大掺量矿物掺合料高强混凝土抗冻性的影响

用快冻法研究高性能的高强高模聚乙烯(High elasticity module polyethylene,HEMP)纤维对大掺量矿物掺合料高强混凝土(High strength concrete,HSC)抗冻性的影响.结果表明,大掺量矿物掺合料HSC具有较好的抗冻性,但是其抗冻性对养护环境RH非常敏感,干燥养护条件下的冻融寿命仅有标准养护的38%～40%.掺加0.1%HEMP纤维虽然降低了大掺量矿物掺合料HSC的抗冻性,但能够显著改善其抗冻性对养护环境RH的敏感性,在30%RH～50%RH养护条件下的冻融寿命高达标准养护时的81%～90%.     

低纬(海南)电离层等离子体漂移对地磁活动的响应

利用2003-2016年期间子午工程海南站（19.5°N,109.1°E）数字测高仪观测到的电离层等离子体漂移数据,分析了高低两种太阳活动条件下纬向和垂直向漂移对近磁静、中等磁扰和强磁扰三种地磁活动水平的响应特性.结果表明：日间纬向漂移各季节均以西向为主,随地磁活动无明显变化,白天日出附近和夜间漂移在各季节均以东向为主,随地磁活动增强而减弱,减弱程度在分季最大,在夏季最小;日间垂直漂移在零值附近变化,且不受地磁活动和季节影响,日落附近漂移仅在分季受到地磁活动的抑制,午夜前垂直漂移在分季受到抑制,在冬季因强磁扰而反向,夏季无明显规律,子夜至日出后垂直漂移在各季节随地磁活动增强而减小.与赤道区Jicamarca相比,两地漂移对地磁活动的响应相近,但在幅度和相位上存在差异,这可能是两地区的地理位置、背景电场和风场结构等不同造成的.     

eLoran系统ASF网格应用算法研究

ASF网格是提高增强型罗兰(Enhanced Long Range Navigation,eLoran)系统精度的重要方法。根据所在网格四个顶点的附加二次时延(Added Secondary Factor,ASF)值通过网格应用算法得到待测试点的ASF值,一定程度上比公式计算的ASF值更准确。在计算过程中,用户四个顶点ASF值的测量误差会传递给用户,同时内插算法本身也会引入误差,此时内插算法的选择尤为重要。本文通过仿真、分析比较几种常用的内插算法,得出结论:反距离插值算法引入的误差最大,双线应插值算法引入的误差最小,而且误差呈现一定层次感,网格从内到外误差逐渐减小。     

航天应用FPGA配置可靠性研究

航天应用系统必须保证每一单元的安全性及可靠性. 现场可编程门阵列(Field Programmable Gate Array, FPGA), 以其I/O管脚丰富、设计灵活等优势, 逐渐被广泛应用于航天领域. 其设计与工艺不断完善, 以适应太空中电子辐射等复杂的工作环境. 由于基于SRAM的FPGA芯片断电后程序丢失, 因此每次上电后都需要先从PROM等外部存储器中加载程序才能正常工作. 然而, 并不是每一个芯片的每一次加载配置都能成功完成, FPGA的上电配置结果将直接关系到卫星任务的成败. 研究发现, 诸如环境温度、信号完整性、供电电压、配置时钟速率等因素会影响FPGA的配置过程, 致使出现偶尔的配置失败, 这在航天应用中是绝对不允许的. 针对实际应用的Xilinx公司FPGA芯片, 为提高上电配置可靠性, 提出了一系列设计保障措施, 在FPGA航天应用领域具有一定的参考价值.     

GPS在气象火箭遥测跟踪上的应用

利用GPS全球定位系统、天线云台和宽波瓣天线组成的跟踪系统, 研究了接收位置信息与跟踪之间的时间差, 气象火箭理论弹道误差导致的中断跟踪,气象火箭探空仪分离后至初次定位前的跟踪, 天线云台转到359°位置后反转359°及跟踪过程中跟踪中断后的继续跟踪等关键问题,成功实现了气象火箭探空仪的遥测跟踪. 该跟踪系统在子午工程气象火箭试验中得到较好的应用, 此种跟踪方式相比传统雷达跟踪方式具有体积小、重量轻、操作简单、成本低、机动性强、跟踪可靠性强等诸多优点.     

Application of CCD drift-scan photoelectric technique on monitoring GEO satellites

Geosynchronous Earth Orbit (GEO) satellites are widely used because of their unique characteristics of high-orbit and remaining permanently in the same area of the sky. Precise monitoring of GEO satellites can provide a key reference for the judgment of satellite operation status, the capture and identification of targets, and the analysis of collision warning. The observation using ground-based optical telescopes plays an important role in the field of monitoring GEO targets. Different from distant celestial bodies, there is a relative movement between the GEO target and the background reference stars, which makes the conventional observation method limited for long focal length telescopes. CCD drift-scan photoelectric technique is applied on monitoring GEO targets. In the case of parking the telescope, the good round images of the background reference stars and the GEO target at the same sky region can be obtained through the alternating observation of CCD drift-scan mode and CCD stare mode, so as to improve the precision of celestial positioning for the GEO target. Observation experiments of GEO targets were carried out with 1.56-meter telescope of Shanghai Astronomical Observatory. The results show that the application of CCD drift-scan photoelectric technique makes the precision of observing the GEO target reach the level of 0.2″, which gives full play to the advantage of the long focal length of the telescope. The effect of orbit improvement based on multi-pass of observations is obvious and the prediction precision of extrapolating to 72-h is in the order of several arc seconds in azimuth and elevation.     

Exploring mission planning method for a team of carrier aircraft launching

High-level efficiency and safety are of great significance for improving the fighting capability of an aircraft carrier. One way to enhance efficiency and safety level is to organize the carrier aircraft into combat effectively. This paper studies the mission planning problem for a team of carrier aircraft launching, and a novel distributed mission planning architecture is proposed. The architecture is hierarchical and is comprised of four levels, namely, the input level, the coordination level,the path planning level and the execution level. Realistic constraints in each level of the distributed architecture, such as the vortex flow effect, the crowd effect and the motion of aircraft, are considered in the model. To solve this problem, a distributed path planning algorithm based on the asynchronous planning strategy is developed. The proposed Mission Planning Approach for Carrier Aircraft Launching(MPACAL) is validated using the setups of the Nimitz-class aircraft carrier.Compared to the isolated planning architecture and the centralized planning architecture, the proposed distributed planning architecture has advantages in coordinating the launch tasks not only belonging to the same catapult but also when all different catapults are considered. The proposed MPACAL provides a modeling method for the flight deck operation on aircraft carrier.