某改型导弹折叠舵的设计

详细介绍了××改型导弹折叠舵研究课题的成果。内容包括：主要设计要求、研制程序、方案的拟定、设计、试验及结果分析、结论等部分。通过试制及试验，证明把高强度扭力杆应用于折叠舵的展开机构具有展开能量大、展开时间短、重量轻、体积小、结构简单等优点。该项技术不但使××改型导弹折叠舵课题获得成功，而且可以推广应用到需要折叠与展开的其他飞行器上     

样条函数在轨道计算中的应用

提出了在已知现速度的情况下，用样条函数计算视加速度的新方法，避免了传统牛顿插值法的不可靠性及由此而产生轨道重构错误的缺点，仿真结果表明用样条函数法重构的轨道精度明显优于牛顿插值法。     

The development of a Russian communication satellite of small class, operating in the geostationary and high-elliptical orbits

In 1994-1995 Lavochkin Association (Russia) together with the other enterprises in accordance with technical requirements of the Russian Space agency, developed a new Russian communication satellite of a small class that will operate in both the geostationary (GSO) and high-elliptical (HEO) orbits. This satellite may be injected into operational orbits using a SOYUZ-2 launch vehicle (LV) and a FREGAT upper stage (US) from Plesetsk and Baykonur space launch sites (SLS).The main reason for creating such a satellite was to decrease the cost of the support and development of the Russian communication geostationary satellites group.Russian satellites Horizont, Express, Ekran and Gals, which operate in GSO, are the basis of the space segment for communications, radio and TV broadcasting. All of these satellites are injected into GSO by the PROTON LV. PROTON is a launch vehicle of a heavy class. The use of a middle class LV instead of a heavy class will allow to reduce considerably the launch cost. The change of a heavy class LV to a LV of middle class determined one economic reason for this project. Besides, the opportunity to launch S/C into GSO from Russian Plesetsk SLS increases the independence of Russia in the domain of space communications, despite the presence of the contract with Kazachstan about the rent of Baykonur SLS. Finally, use of small satellites with a rather small number of transponders is more effective than the use of big satellites. It will allow also to increase a satellite group (by the launch of additional satellites) precisely in accordance to the development of the ground segment.     

着陆姿态对地外天体表层采样的影响研究

表层采样技术是获得地外天体特性的重要手段,是完成地外天体采样任务的一项关键技术。文章结合4自由度表层采样装置的特点,建立了表层采样装置的逆运动学模型,分析了极限着陆姿态下表层采样装置安装位置在当地参考坐标系中的变化,并针对一次封装与二次封装过程中表层采样装置的位置和姿态要求,明确了末端采样器姿态补偿方法,提出了着陆姿态对表层采样影响的分析算法。仿真结果表明,该算法能有效分析着陆姿态对表层采样的影响,可为表层采样装置适应性设计提供支持。     

空间邻近目标跟踪与航迹关联的联合优化算法

针对单传感器跟踪空间邻近目标过程中存在航迹交错的问题,提出一种基于分布式多传感器融合结构的跟踪与航迹关联联合优化算法.该算法在单帧航迹全局最优航迹关联的基础上,通过航迹关联质量检测传感器航迹是否存在交错,然后构造交错航迹对的拟测量,并根据拟测量误差协方差计算融合“测量”,最后由融合中心对融合“测量”进行全局最优点迹-航迹互联和交互多模型(IMM)滤波更新融合航迹.考虑分布式融合系统约束情况,给出采用次优拟测量的替代方法.仿真结果表明,与传统航迹关联算法相比,联合优化算法能够明显提高目标跟踪精度和身份正确率.     

Three dimensional temperature field in a conducting sphere due to an arbitrarily located split ring heating source

Thermal control of spacecrafts plays an important role in space missions. In the design stage the preliminary thermal analysis of the spacecraft requires an estimate of the conductive thermal resistance between the various spacecraft components. With this in mind, the fully three dimensional problem of determining the thermal field in a conducting sphere with an asymmetric split ring current carrying heating source is resolved in an analytical or almost analytical form, implying either a closed form solution or utmost expressions involving a simple numerical integration. This has immediate application for evaluation of thermal resistance in spacecrafts. Green's function integral techniques are used. Comparisons are made with series solutions and also with purely numerical solutions to contrast the simplicity and highlight the elegance of the present method. Parametric studies reveal expected behavior.     

Detonation engine fed by acetylene–oxygen mixture

The advantages of a constant volume combustion cycle as compared to constant pressure combustion in terms of thermodynamic efficiency has focused the search for advanced propulsion on detonation engines. Detonation of acetylene mixed with oxygen in various proportions is studied using mathematical modeling. Simplified kinetics of acetylene burning includes 11 reactions with 9 components. Deflagration to detonation transition (DDT) is obtained in a cylindrical tube with a section of obstacles modeling a Shchelkin spiral; the DDT takes place in this section for a wide range of initial mixture compositions. A modified ka-omega turbulence model is used to simulate flame acceleration in the Shchelkin spiral section of the system. The results of numerical simulations were compared with experiments, which had been performed in the same size detonation chamber and turbulent spiral ring section, and with theoretical data on the Chapman–Jouguet detonation parameters.     

New one-axis one-sensor magnetic attitude control theoretical and in-flight performance

New one-axis magnetic attitude control is proposed. Only one attitude sensor providing any inertial direction measurements is necessary, magnetometer is not used. The control may be used as a backup capability in case main actuators or some attitude sensors fail. Sun pointing is achievable using only three-axis Sun sensor, so the control may be used to lower the power consumption during battery charging. Asymptotic stability of different equilibria depending on the satellite inertia tensor is summarized. In-flight results from “Chibis-M” microsatellite are provided proving general control performance.     

Numerical investigation of the impact of asymmetric fuel injection on shock train characteristics

Numerical simulations are carried out to investigate the impact of asymmetric fuel injection on shock train characteristics using the commercial-code FLUENT. The asymmetry of fuel injection is examined by changing the fuel flow rates of the upper and lower wall fuel injectors. The numerical approach solves the two-dimensional Reynolds-averaged Navier–Stokes (RANS) equations, supplemented with a k-ω model of turbulence. As a result, different ways of fuel injections will always lead to shock train transitions, with the variations of shock train structure, strength and leading edge position. For symmetric fuel injection, the flowfield of the isolator is quite asymmetric with the boundary layer of the upper wall side developing much stronger than that of the lower wall, which is due to the heterogeneity of the incoming flow. Regarding to asymmetric fuel injection with more of lower wall side, though the pressures in the combustor are nearly the same, the first shock of the shock train converts between ‘Distinct symmetric X type shock’ and ‘Obscure and weaker asymmetric shock’ and the shock train leading edge moves upstream with the increase of the asymmetry level. With regard to asymmetric fuel injection with more of upper wall side, ‘incomplete asymmetric X type shock’ occurs and the shock train structures keep nearly the same with low level of fuel injection asymmetry. Unexpected results like unstart will happen when increasing the level of fuel injection asymmetry. And the isolator will come back to normal state by decreasing the differential of upper and lower wall sides fuel injections.     

The mass loss of spacecraft polyimide films under the action of atomic oxygen and vacuum ultraviolet radiation

The threshold values of the annual fluence of atomic oxygen (F _AO ≈ 10²⁰ cm^?2), as well as the ratios of the energy-flux density of vacuum ultraviolet radiation of the solar spectrum to the flux density of atomic oxygen (Φ _ν /Φ _AO ≈ 8 × 10^?15 mJ) were determined, which are characterized the influence of the synergistic effect on the mass loss of Kapton-H, PM-A, and PM-1E polyimide films, which are spacecraft materials.