基于空间环境下细胞预处理装置的研制

生物样品的分离纯化是生命科学研究中的重要环节。在常规地面分离方法中,往往用到离心、萃取等操作,然而在空间微重力条件下,常规的方法无法进行,需要采用特定的方法和技术进行研究。以实现空间环境下细胞内生物大分子的分离为目标,研制了一种可以自动化一体化的装置,其先对细胞样品进行清洗、裂解并释放内溶物,然后在超滤分离池中将生物大分子和小分子化合物进行分离。通过对分离获得的大分子物质如蛋白质的回收率来优化仪器装置的最佳运行条件。结果表明,所研制的装置通过泵在一定频率下的切换,可使裂解体系在膜上进行反复的往返振动,从而使裂解液与细胞进行充分的接触,有效提高了细胞裂解的程度,提高了大分子蛋白的回收率,并通过条件优化确定了装置的最佳运行条件。     

用热流探针测量激波速度

激波速度测量是激波管和激波风洞运行状态的一个重要参数,压电传感器或光学方法测速系统成本高,而传统电离探针在激波马赫数较低、波后温度达不到空气电离程度的情况下无法满足实验要求。提出了一种使用同轴热电偶作为测速探针来测激波速度的方法,弥补了电离探针在激波马赫数较低时的不足。介绍了同轴热电偶探针测速原理,并设计了测量激波速度的系统电路。通过信号放大电路锁定激波冲激信号,触发脉冲信号发生电路,实现了一种单通道、多测点的激波风洞测速系统。分别开展以温度与热流为触发信号的风洞实验,结果表明只有使用热流信号才能满足激波测速的时间要求。     

基于ANSYS的同面多电极电容传感器仿真研究

同面多电极电容传感器是一种新的飞机复合材料构件损伤检测技术,该检测技术的正问题中敏感场分布函数的计算要涉及到静电场中电容计算问题。在仿真研究中,电容要通过场的数值计算方法来求得。本文介绍了如何使用ANSYS有限元分析计算同面多电极电容传感器中的各电极对之间的电容,对检测材料发生异常及传感器参数改变时电容的变化进行了分析,为损伤检测的特征提取和逆问题图像重构提供了仿真数据。     

翼尖装置优化设计研究

使用面元法气动分析软件VSAERO对机翼与翼梢小翼组合体模型进行数值模拟,并采用Steve Smith提出的诱导阻力优化方法对翼梢小翼的定位进行优化设计。结果表明,能够有效地预测出翼梢小翼的最优定位,在翼梢小翼优化设计中具有很好的适用性。     

Y12─Ⅱ型飞机结冰对其飞行特性影响的试飞研究

以Ｙ１２─Ⅱ型飞机防冰系统适航验证试飞为例，就确定飞机结冰部位与防护方法，结冰对飞机飞行性能和操稳特性的影响，带冰着陆的可能性及其安全措施等问题进行了分析和讨论。通过飞行试验，初步检查出飞机结冰造成飞机飞行性能的损失和操稳特性的降低。仅在新机研制中，为防冰系统适航性验证工作提供参考。     

尖前缘翼干扰区的壁面压力和热流率分布

本文给出Ｍ＿∞＝７．８和６．７２，Ｒｅ＝３．５×１０￣７／ｍ和５．４×１０￣７／ｍ气流绕迎角为２０°、３０°和３５°尖前缘翼运动时，平板锥型干扰区的壁面压力和热流率分布。结果表明：（１）平板锥型干扰区的特征几何尺度与无粘激波角β＿０和翼迎角α相关，而壁面压力和热流率的峰值与法向马赫数Ｍ＿ｎ相关。（２）翼面压力和热流率分布由于受拐角涡影响，前者在翼根部呈波谷状，而后者呈波峰状，影响尺度与翼前缘处来流边界层厚度有关。     

Design and characteristics of a multiband communication satelliteantenna system

Feasibility studies on a multiband communication satellite antenna system and the key technologies involved in devising this system are described. The proposed multiband communication satellite utilizes four frequency bands: Ka (30/20 GHz), Ku (14/12 GHz), C (6/4 GHz), and S (2.6/2.5 GHz). It has six beam configurations, three multibeam and three shaped-beam. The following key technologies are presented: (1) a low-loss frequency selective subreflector (FSR) for compact feeds, (2) a low-loss and broadband frequency selective surface (FSS), and (3) a highly accurate and reliable mesh reflector     

圆度仪的数字化测量

介绍了对圆度仪的数字化改造方法。讨论了测量数据的数字化处理的方法及利用单纯形法对测量对象圆度进行评定，给出了实际的测量结果。     

大迎角细长旋成体绕流结构演变过程实验研究

 通过烟流显示和测压实验, 系统地观察和分析了尖拱头细长旋成体绕流结构随迎角的演变过程。实验发现在不同迎角下, 不仅细长旋成体绕流结构形态不同, 而且不同流态结构的演变过程所含迎角范围较小,几乎在几度迎角内就可完成。     

Modelling of the electromagnetic field in the interplanetary space and in the Earth's magnetosphere

A magnetohydrodynamic model of the solar wind flow is constructed using a kinematic approach. It is shown that a phenomenological conductivity of the solar wind plasma plays a key role in the forming of the interplanetary magnetic field (IMF) component normal to the ecliptic plane. This component is mostly important for the magnetospheric dynamics which is controlled by the solar wind electric field. A simple analytical solution for the problem of the solar wind flow past the magnetosphere is presented. In this approach the magnetopause and the Earth's bow shock are approximated by the paraboloids of revolution. Superposition of the effects of the bulk solar wind plasma motion and the magnetic field diffusion results in an incomplete screening of the IMF by the magnetopause. It is shown that the normal to the magnetopause component of the solar wind magnetic field and the tangential component of the electric field penetrated into the magnetosphere are determined by the quarter square of the magnetic Reynolds number. In final, a dynamic model of the magnetospheric magnetic field is constructed. This model can describe the magnetosphere in the course of the severe magnetic storm. The conditions under which the magnetospheric magnetic flux structure is unstable and can drive the magnetospheric substorm are discussed. The model calculations are compared with the observational data for September 24–26, 1998 magnetic storm (Dst _min=−205 nT) and substorm occurred at 02:30 UT on January 10, 1997. This revised version was published online in August 2006 with corrections to the Cover Date.