Tear Resistance of Orthogonal Kevlar-PWF-reinforced TPU Film

This work seeks to investigate the notch sensitivity and fracture behaviour of orthogonal Kevlar-plain woven fabric (PWF)-reinforced thermoplastic polyurethanes (TPU) film applied to high altitude balloon. Four types of specimens are implemented to measure notched strength and fracture toughness by conducting static tension and tear tests on an MTS system respectively. The damage and failure mechanisms are discussed and the results for notched strength and tear resistance are evaluated and compared with each other. From the experiments, it is found that the notch sensitivity of the film increases with the increase in the size of the hole, but the notch sensitivity and the stress concentration of the notch are insignificant and there is a decrease of only about 4%-10% in tensile strength for the notched specimens with different hole sizes in diameter compared with the unnotched specimen. In contrast, the tear resistance containing a central slit with only 1 mm length is about half of tensile strength of the unnotched film, which implies that the tear resistance exists an significant notch sensitivity. The results of this study provide an insight into notch sensitivity and fracture behaviour of the Kevlar-PWF-reinforced TPU film and constitute a fundamental basis for the design of high altitude balloon.     

基于VPM的教练机三维协同设计技术应用研究

随着CAD技术的发展,教练机的设计方式和设计手段发生了巨大变化.本文探讨了基于ENOVIA VPM平台应用CATIA软件三维协同设计技术,分析了教练机三维协同设计相关技术,着重介绍了三维协同设计技术在教练机设计中的应用.     

CALS在航空订货领域的应用展望

随着国内信息技术的迅猛发展和广泛应用,传统的武器装备研制生产、使用保障体系正在向新型的信息化武器装备体系转变.从而为持续采办与全寿命支持(CALS)在国内武器装备订货中的应用提供了必要的技术基础.本文主要探讨CALS在航空订货领域的应用前景.     

我国高原机场运行的地面及空勤特殊保障

位于我国西部高原的机场,一般净空条件极差、气候复杂多变。高原航线地形复杂,航路安全高度高,航路的运行安全问题尤为突出。针对中国西部高原复杂机场及航线的特点,对飞机性能、特殊飞行操作、适航改装、机务维修进行分析及论述,对规范高原航线运行合格审定提出一些建议。     

两种静弹修正方法的对比

本文针对工程应用的实际情况,采用线化理论和非线化理论对同一模型进行了静气动弹性计算,并对不同马赫数、不同高度的刚弹性计算结果进行了对比分析。结果表明,低速时可忽略弹性变形对气动力的影响,而高速时必须考虑弹性变形对气动力的影响,在工程应用初期,可用线化理论对非线性段气动力进行静弹修正,虽然精度有所降低,但效率却大大提高,在后期可用非线化理论进行校核计算。     

A-TIG焊的研究现状和发展趋势

活性焊接技术还需要从焊接的前处理工艺、焊接规范、焊后的热处理以及焊接接头的性能等方面与常规TIG焊接进行详尽的对比,得到常用不同材料A-TIG焊接的稳定的工艺参数,并在实际工程应用的研究方面进行进一步系统研究。     

Implications of X-ray Observations for Electron Acceleration and Propagation in Solar Flares

High-energy X-rays and ??-rays from solar flares were discovered just over fifty years ago. Since that time, the standard for the interpretation of spatially integrated flare X-ray spectra at energies above several tens of keV has been the collisional thick-target model. After the launch of the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI) in early 2002, X-ray spectra and images have been of sufficient quality to allow a greater focus on the energetic electrons responsible for the X-ray emission, including their origin and their interactions with the flare plasma and magnetic field. The result has been new insights into the flaring process, as well as more quantitative models for both electron acceleration and propagation, and for the flare environment with which the electrons interact. In this article we review our current understanding of electron acceleration, energy loss, and propagation in flares. Implications of these new results for the collisional thick-target model, for general flare models, and for future flare studies are discussed.     

飞机数字化工艺技术发展趋势初探

CAPP技术的研究与应用在我国经历了智能化技术研究、单一专业工程应用以及平台化工程化应用等阶段.近年来基于CAPP的工具化系统在我国各个行业制造业中得到普遍应用,并且取得了良好的应用效果.     

偶联涂层处理对APMOC/环氧复合材料层间剪切性能的影响

介绍了溶剂、硅烷偶联剂浓度、含胶量等对APMOC/环氧层间剪切强度(ILSS)影响的研究结果,并初步探讨了其改性机理和涂层厚度控制的一些问题。     

基于人类视觉特性的遥感图像优化显示及应用

在分析遥感图像主观质量（Subjectivequality）评价的基础上,提出基于人类视觉特性的优化显示技术．并应用于遥感图像压缩、相对辐射校正评价和噪声估计。结果表明：当图像以50％比例放大时,处理前后的效果不明显：以100％比例放大时,差异性开始出现;当显示比例提高到200％时,图像的噪声、条纹及退化现象比较容易发现与识别。因此,当需要比较两幅图像差异及监测图像质量变化时,建议显示比例设为200％。上述成果已成功应用于CBERS-02B卫星HR相机及后续高分辨率相机压缩方案的评价,也用于中国卫星遥感地面处理系统的图像质量监测。