Experimental investigation on deformation behavior of TJ-1 lunar soil simulant subjected to principal stress rotation

The knowledge of mechanical properties of lunar soil is of fundamental importance for the coming exploration of the Moon. This paper aims to investigate the fundamental deformation behavior of lunar soil and the effects of the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress during the principal stress rotation. First, an improved technique was proposed to generate homogeneous samples based on the Multi-layer Undercompaction Method. Second, three series of tests on TJ-1 lunar soil simulant under the principal stress rotation were performed with a hollow cylinder apparatus at Tongji University, China. In each series of tests, only one value of the three variables mentioned above was changed while the others were kept constant. The test results demonstrate that the rotation of principal stress can result in significant plastic deformation, volumetric strain, and non-coaxiality (non-coincidence of the increment direction of principal plastic strain with the principal stress direction) of TJ-1 lunar soil simulant. In addition, it is found that the intermediate principal stress coefficient, deviatoric stress ratio, and mean stress have different influences on the four strain components, i.e. _εz,_εr,_εθ${\epsilon }_z\text{,}{\epsilon }_{\text{r}}\text{,}{\epsilon }_{\theta }$ and _γzθ${\gamma }_{z\theta }$, volumetric strain, and non-coaxiality during the principal stress rotation. The influence of deviatoric stress ratio is relatively stronger than the others. Therefore, the influence of principal stress rotation on the deformation behavior of lunar soil should be taken into account carefully in the design and construction of facilities on the lunar surface in the future.     

非对称受损飞机多变量模型参考自适应控制

针对非对称受损的常规布局飞机,对其自适应控制设计方法与适用条件进行了研究.建立了非对称结构受损飞机的非线性模型,详细讨论了模型的线性化过程以及受损造成的纵、横向间动态耦合项;结合常规布局非对称结构受损飞机的物理特性,对多变量模型参考自适应控制器设计的关键条件：关联矩阵和高频增益矩阵顺序主子式符号的不变性做出了证明,确立了该方法在非对称结构受损飞机上应用的理论可行性;通过仿真验证了MRAC（Model Reference Adaptive Control）方法对非对称结构受损飞机控制的有效性.     

地地弹道导弹可用性仿真评估系统构建

阐述了地地弹道导弹可用性评估的重要性,并以此为需求牵引,提出了以MTMC-RDEDS(Mission Time Monte Carlo Random Discrete Event Dynamic Systems)为核心的可用性建模与仿真一体化框架,结合实际应用,以模型重用技术为基础,构建了拥有丰富建模与仿真知识库、模块化设计与开放式接口的导弹可用性仿真评估系统总体框架及软件层次结构,并给出了涉及工作状态、维修保障、统计优化在内的核心仿真模型与算法,探讨了系统实现的关键技术,包括:随机变量建模、武器系统建模、仿真系统可信度评估.利用VC++和相关软件开发了地地弹道导弹可用性仿真评估系统,给出了仿真运行界面,并进行实例分析,验证模型和系统的有效性.仿真的结果与实际试验情况吻合较好,表明该动态评估方法快捷有效,评估系统建设方案合理可行,适用于工程分析,不失为地地弹道导弹可用性评估的一种有效手段.     

一种预估反作用飞轮过零寿命的计算方法

对反作用飞轮轴承组件的边界润滑状态、疲劳寿命进行了理论分析,并对边界润滑的摩擦模型进行了一定简化,采用Archard磨损理论建立了磨损率与疲劳寿命的关系.根据边界润滑状态和弹流润滑状态的对比分析,建立了反作用飞轮在过零状态下的过零寿命的计算公式,可定量估算反作用飞轮的过零寿命.     

翼柱形药柱燃面退移过程的变量化设计方法

固体火箭发动机翼柱形药柱燃面拓扑结构复杂,现有燃面退移仿真算法存在耗费时间长、燃面面积计算不准确及算法通用性差等问题.针对以上问题,采用变量化约束草图驱动的设计方法,通过执行图形比例变换,缩小药柱尺寸规模,还研究了一种新的颜色标识燃面算法,避免燃面统计疏漏与重复,并提出了适合单组翼、大小翼、前后翼等多种翼柱形药柱燃面退...     

弹道导弹诸元检验方法研究

分析了陆基、海基弹道导弹诸元检验特点,介绍了诸元检验基本内容.在点位覆盖性检验中,从弹道解算的地球模型和特点出发提出了以小范围测试代替全球测试的方法;在诸元解算正确性与匹配性检验中,提出了搭建模飞半实物仿真系统的方法;在诸元解算快速性检验中,提出以点位覆盖性检验为基础,选取典型点位测试的方法.     

基于DSP的模糊PID舵机控制算法设计与实现

针对导弹舵机驱动控制系统,设计了一套基于DSP 2812的数字单闭环模糊PID舵机控制系统,同时分析了控制算法、控制器软件设计等问题.并对采用模糊PID参数自整定算法和传统PID算法所得的结果进行了对比分析.试验结果表明:采用基于DSP 2812的数字单闭环模糊PID舵机控制系统后,不仅简化了系统外围设备,而且舵机控制...     

Control of approach and landing phase for reentry vehicle using fuzzy logic

The reentry vehicle is affected by various disturbances such as a wind gust, atmospheric condition or aerodynamic problems in the approach and landing phase. Therefore it is necessary to design a robust control scheme. This paper presents a control scheme using Mamdani fuzzy PD controller. In this paper, the reference trajectories are generated using geometric parameters for disturbed circumstances with 4 cases: nominal, headwind and tailwind, drag increased case. Then, a Mamdani fuzzy PD controller was designed in this study. Twenty-five rules were applied in the knowledge-based system. The max–min method for a fuzzy inference system and the center-of-mass method in defuzzification were used. Finally, guidance and control simulations are performed for verification of proposed controller using generated reference trajectories. In addition, the Monte Carlo simulation is performed considering various disturbances. The results show that proposed Mamdani fuzzy PD controller has reliability and robustness for control of reentry vehicle with wind disturbance in the approach and landing phases.     

北斗／罗兰-C组合定位技术

“北斗一号”是我国的卫星导航系统,其有源定位模式使其很难得到广泛应用。为此,提出了一种北斗／罗兰-C组合定位方案以实现无源定位。该方案利用“北斗一号”两颗卫星和地面罗兰-C台站获得的距离差信息实现双曲线相交定位。仿真结果表明,该方案的精度可以满足一般定位要求,具有较强的实用性。