嵌金属丝推进剂燃烧起始阶段增速特性研究

考虑了使用嵌金属丝装药的发动机工作过程中的多种因素,建立了金属丝与药柱、燃气间相互作用的控制方程组,并对方程组进行了数值求解,得到了嵌金属丝推进剂在燃烧起始阶段,增速比随时间的详细变化过程。结果表明,金属丝的热扩散率、熔点、直径和黑度以各自不同的方式影响金属丝的增速效果,熔点相对较低的金属丝可能会在内弹道曲线的初始阶段形成一个轻微的压强峰,固有燃速较低、着火温度较低的推进剂对嵌入金属丝较为敏感。文中数值方法计算量小,结果可靠,适于工程应用。     

圆轨道星座全球覆盖的充分必要条件

对采用圆轨道的星座，目前的研究基本上局限于实际应用方面，很少进行理论方面的研究，本文首次提出并证明了达到全球连续多重覆盖的充要条件。这对进行星座设计具有积极的指导意义。     

Improved ZCS-PWM commutation cell for IGBTs application

An improved zero-current-switching pulsewidth-modulated (ZCS-PWM) commutation cell is presented, which is suitable for high-power applications using insulated gate bipolar transistors (IGBTs) as the power switches. It provides ZCS operation for active switches and zero-voltage-switching (ZVS) operation for passive switches. Besides operating at constant frequency and reducing commutation losses, the proposed ZCS-PWM switch cell has no additional current stress and conduction loss in the main switch. To demonstrate the feasibility of the proposed ZCS-PWM commutation cell, it was applied to a boost converter. Operating principle, theoretical analysis, design guidelines, and a design example are described and verified by experiment results obtained from a prototype rated 1 kW and operating at 40 kHz. The PWM switch model and state-space averaging approach is also used to estimate and examine the steady-state and dynamic character of ZCS-PWM boost converter system. Finally, the application of the proposed soft-switching technique in the dc-dc nonisolated converters is presented.     

Phase-Coded Interrupted CW Signals and Processors

High resolution radars require signals with large time-bandwidth product such as CW signal and coherent pulse train (CPT). We discuss a phase-coded interrupted CW (ICW) signal which is the combination of CW signal and CPT. Phase codes used here are with perfect periodic autocorrelation. The periodic ambiguity function of ICW signals is studied including single-carrier signal and multi-carrier signal. It is interesting that the gate function has different effects on two signals and contributes to a multi-carrier ICW signal which yields nearly perfect autocorrelation. Meanwhile we also suggest an efficient receiver approach to ICW signals, which can reduce the computational burden of the processor and utilize the good properties of P3 and P4 codes.     

空间电子攻击的体系作战效用及发展对策

通过分析空间电子攻击在打击对象多、方式灵活多样,打击速度快、隐蔽突然,效果等同于火力打击、太空安全隐患小等方面的优势,得出了"空间电子攻击具有很大的发展潜力,是未来空间对抗力量发展的重心"的结论。通过分析空间电子攻击在遮态势感知耳目、断信息分发链路、破精确打击能力、实施战略威慑方面发挥体系作战效用的机理,论证了空间电子攻击的体系作战效用。通过分析还提出空间电子攻击力量的发展对策。     

一种同轴腔温漂问题的仿真

文章在三维仿真软件HFSS和CST中建立谐振腔模型，给出建模的原理和注意点；详细研究了腔体各尺寸随温度变化对腔体本征频率的影响的正负性及影响大小，得出引起腔体频率变化的主要结构因素；重点分析了调谐螺钉纵向扰动及径向扰动对谐振频率的影响。结合LC谐振电路对结果进行分析，得出减小温漂的措施。并根据仿真结果，对腔体的各个部分合理使用不同材料，使腔体温漂得到补偿。     

固体燃料ATR涡轮/压气机匹配方法研究

为了获得固体燃料空气涡轮火箭发动机(SP-ATR)中涡轮和压气机的匹配工作特性,建立了涡轮和压气机的工作特性模型,根据SP-ATR转速、功率和背压平衡的工作特点,分别基于涡轮和压气机的工作环境先后采用两种不同的方法完成了二者的匹配。对比两种匹配方法得出结论:(1)基于涡轮的匹配方法与转速稳定过程一致,可确定特定飞行环境中发动机的转速;(2)基于压气机的匹配方法需要条件更少、适用范围更广,可用于特定转速调控方案下驱涡燃气流量的确定。两种匹配方法的计算结果相对Ax STREAM仿真结果的最大误差为10.75%,两种匹配方法的计算结果相差不超过8%。将建立的匹配方法应用于HARM弹自主爬升飞行过程,得到SP-ATR驱涡燃气流量的定量调控规律。     

Numerical study on flow fields and aerodynamics of tilt rotor aircraft in conversion mode based on embedded grid and actuator model

A method combining rotor actuator disk model and embedded grid technique is presented in this paper, aimed at predicting the flow fields and aerodynamic characteristics of tilt rotor aircraft in conversion mode more efficiently and effectively. In this method, rotor's influence is considered in terms of the momentum it impacts to the fluid around it; transformation matrixes among different coordinate systems are deduced to extend actuator method's utility to conversion mode flow fields' calculation. Meanwhile, an embedded grid system is designed, in which grids generated around fuselage and actuator disk are regarded as background grid and minor grid respectively, and a new method is presented for ‘donor searching' and ‘hole cutting' during grid assembling. Based on the above methods, flow fields of tilt rotor aircraft in conversion mode are simulated, with threedimensional Navier–Stokes equations discretized by a second-order upwind finite-volume scheme and an implicit lower–upper symmetric Gauss–Seidel(LU-SGS) time-stepping scheme. Numerical results demonstrate that the proposed CFD method is very effective in simulating the conversion mode flow fields of tilt rotor aircraft.     

扩频测控信号大动态信息频域加载方法

针对静态扩频测控信号的大动态信息加载,提出一种基于数字化处理的频域高精度加载方法。方法采用不同的处理方法分别对两路信号加入动态信息,其中一路通过FFT和频谱搬移加入载波多普勒信息,另一路通过对扩频码进行延时处理得到包含动态信息的扩频码,并使用第二路信号对第一路信号进行调整,从而实现原始扩频测控信号的动态信息加载。仿真结果表明,方法可以保留原信号内载波和扩频码的相关性以及原始信号中可以反映信道等特性的噪声,同时实现动态信息的高精度加载。     

固体燃料空气涡轮火箭发动机工作模式

根据SP-ATR目前存在的燃气难以兼顾清洁和富燃的问题,文章提出将原本由1股燃气单独承担驱动涡轮和补燃功能的工作模式分解为由2股燃气分别担负驱涡和补燃功能的工作模式。通过对比分析该工作模式的SP-ATR和固冲发动机、涡喷发动机工作特点,提出了适合该形式SP-ATR的性能计算模型,得到其飞行包线,发现该SP-ATR工作包线宽广,可完全包含涡喷和固冲发动机的工作包线。在此基础上,计算得到了SP-ATR在不同空域和速度条件下的飞行性能及变化规律:(1)随飞行高度和速度的增加,其比冲、比推力增加,但性能随外弹道变化幅度较小,整个工作范围性能稳定;(2)在近地面和低空SP-ATR均可实现低空亚音速盘旋和5 km高度以上的超音速飞行,且在比冲高于6 700 N.s/kg,同时保持比推力大于1 100 N.s/kg;(3)高空SP-ATR工作高度速度范围宽,比冲性能与冲压发动机相当,比推力为冲压发动机的2倍,相同飞行速度条件下飞行高度增加比冲增加、比推力增加,具有在更高高度巡航潜力,高空性能优势明显。