星载低噪声放大器噪声系数的高精度测试方法研究

噪声系数是低噪声放大器的关键指标,它决定了系统的噪声性能.然而现有的测量方法不能修正失配和噪声参数误差,只能给出基于源阻抗的噪声系数.为了提高低噪声放大器噪声系数的测量精度,文章基于矢网冷源噪声系数测试方法,给出优选的矢量噪声校准法,并提出5项重要技术措施以进一步提高低噪声放大器噪声系数的测量精度.相比Y因子法,矢网冷...     

广播电视卫星高精度时间传递

介绍一种利用我国广播电视卫星进行高精度时间传递的方案,建立多个卫星电视时间发播系统,利用广播电视卫星进行双向时间比对,实现远距离卫星地面站之间的时间同步。通过测量地面站到卫星之间的距离,可实时计算出卫星的坐标位置,用户根据接收到的时间及卫星位置信息,实施高精度定时。     

飞机电源系统故障诊断方法综述及发展趋势

飞机电源系统是机上一切用电设备的电能来源,其安全性与可靠性至关重要。在环保和高效发展需求的背景下,现代航空工业正在推进以电能为核心的多电/全电飞机技术的研究和应用。电驱动装置和电力电子器件的广泛使用导致飞机电源系统结构的复杂化,对飞机的可靠性、安全性、测试性和维修性提出了更高的要求,研究飞机电源系统的故障诊断技术具有重要意义。首先介绍了飞机电源系统的组成结构和各自功能,概述了飞机电源系统的发展历程,对比了国内外典型电源系统的特征,总结了飞机电源系统中的主要故障模式、故障特点和失效原因,并提出了一种飞机电源健康管理系统的设计架构,然后综述了国内外基于模型和基于数据的故障诊断方法研究进展,从准确度、数据需求量、适用性和实现难易程度等方面评述了各类诊断方法的特点,最后指出了飞机电源系统故障诊断技术面临的挑战和发展趋势。     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

Early analysis of precise orbit and clock offset determination for the satellites of the global BeiDou-3 system

Eight new-generation BeiDou satellites (BeiDou-3) have been launched into Medium Earth Orbit (MEO), allowing for global coverage since March 2018, and they are equipped with new hydrogen atomic clocks and updated rubidium clocks. Firstly, we analyzed the signals for the carrier-to-noise-density ratio (C/N0) and pseudorange multipath (MP) by using international GNSS (Global Navigation Satellite System) Monitoring and Assessment System (iGMAS) station data, and found that B1C has a lower C/N0, and B2a has the same level of C/N0 as the B1I and B3I signals. For pseudorange multipath, compared with the BeiDou-2 satellites, the obvious systematic variation of MP scatters related to the elevation angle is greatly improved for the BeiDou-3 and BeiDou-3e satellites signals. For the signals of the BeiDou-3 satellites, the order of the Root Mean Square (RMS) values of multipath and noise is B3I?<?B1I?<?B2a?<?B1C. Then, the comparison of the precise orbit determination and clock offset determination for the BeiDou-2, BeiDou-3, and BeiDou-3 experimental (BeiDou-3e) satellites was done by using 10 stations from iGMAS. The 3D precision of the 24?h orbit overlap is 24.55, 25.61, and 23.35?cm for the BeiDou-3, BeiDou-3e, and BeiDou-2 satellites, respectively. BeiDou-3 satellite has a comparable precision to that of the BeiDou-2 satellite. For the precision of clock offset estimation, the Standard Deviation (STD) of the BeiDou-3 MEO satellite is 0.350?ns, which is an improvement of 0.042?ns over that of the BeiDou-2 MEO satellite. The stabilities of the BeiDou-3 and BeiDou-3e onboard clocks are better than those of BeiDou-2 by factors of 2.84 and 1.61 at an averaging time of 1000 and 10,000?s, respectively.     

Ground experiments of Chang’e-5 lunar regolith penetrating radar

The Lunar Regolith Penetrating Radar (LRPR) is an Ultra-Wideband (UWB) array-based Ground penetrating radar (GPR) onboard the lander of Chang’e-5 (CE-5) mission. The primary scientific objectives of the LRPR are to probe the thickness and structure of lunar regolith of the landing site, and support the drilling and sampling process. In order to evaluate the performance of the LRPR, a series of ground experiments are performed using the LRPR prototype mounted on a CE-5 lander model. The performance of the LRPR is evaluated by comparing the experimental data with the simulated data. Data processing and imaging method are verified, and the interferences from the lander and other aspects are analyzed. The results of the ground experiments and simulation demonstrate that the LRPR is able to meet the design requirement of 2-m detection depth. They also indicate that the upper and lower interfaces of the stratified structure in the lunar regolith can be well distinguished by the LRPR when the dielectric constant difference is greater than 0.3, and the imaging effect of the location under the dense antennas is better than that of other positions. However, the identification capability of the LRPR to the independent blocky objects is relatively poor mainly due to the clutters caused by the lander, the sparsity of the antenna elements compared to the size of the basalt block, the limited aperture of the antenna array, and the tail of the transmitted waveform.     

Interference torque of a three-floated gyroscope with gas-lubricated bearings subject to a sudden change of the specific force

A numerical study is carried out to investigate the influence of a sudden change of the specific force on a three-floated gyroscope with a rotor supported on gas-lubricated bearings.The interference torque is calculated to evaluate the influence by modeling the transient behavior of the rotor-bearing system. In combination with dynamic equations of the rotor displacement,the Reynolds equation is solved on the surface of spiral-grooved conical bearings. It is assumed that a steady state has been obtained with a constant specific force, and then the specific force is suddenly changed and maintained constant after that. Responses of the sudden change are obtained by solving the equations. Numerical results show that the direction of the sudden change of the specific force is the main factor which influences the interference torque curve. With a sudden change along the input direction, the interference torque fluctuation has a constant frequency and a decreasing amplitude. With a sudden change along the output direction, the interference torque fluctuates in a small range. With a sudden change along the spin direction, the change of the interference torque combines a fluctuation and a gradually-changing quasi-equilibrium value. This study provides a supplement to the steady-state error model of the three-floated gyroscope.     

超静超稳卫星碰振动力学建模

针对分离式卫星载荷模块(PM)受到扰动时可能与服务模块(SM)发生碰撞的问题,综合音圈电机反电动势(back-EMF)和柔性线缆动力学的效应,基于牛顿欧拉法建立了分离式卫星(DFP)载荷模块动力学模型。基于Hertz接触理论,推导了分离式卫星碰撞过程中连续接触力模型,并分析了碰撞过程中产生的接触力对载荷模块指向精度和指向稳定度的影响。数值仿真结果表明,碰撞使得载荷模块指向精度和指向稳定度下降5个数量级,碰撞后载荷模块可再次恢复到超静超稳工作状态,恢复时间超过1400 s。本文建立的碰撞模型对研究分离式卫星碰撞规避和碰撞控制具有重要意义。     

热力学排气系统中节流效应及其冷量利用分析

为更好地理解热力学排气系统(TVS)的运行机理,优化其运行参数,针对节流装置,建立了热力学模型,讨论了节流过程中状态参数的变化规律,对比了单相气体、单相液体节流的性能特性,进一步揭示了焦汤节流效应的原理,分析了不同节流背压下节流前低温工质(液氢和液氧)压力和温度对节流性能的影响,并结合TVS实际应用,阐述了节流最大制冷量的利用效果,提出了优化的TVS工作区间。研究表明：在节流过程不发生相变情况下单相气体节流制冷效应要比单相液体节流制冷效应更加显著;而在节流过程发生相变情况下液体节流至两相后,由于空化吸热导致流体温度降低,对于液氢,0.5MPa的压降可产生接近3 K的温降。对于液体节流,节流前压力对节流过程影响可忽略,〖JP2〗而节流前温度和节流背压对节流过程起主导作用;对于液氢在在轨运行工况下,考虑到节流制冷量的充分利用,同时保证换热过程体积含气率不高于90%,推荐TVS系统中节流背压范围为75～143 kPa。     

三轴稳定遥感卫星姿控系统故障情况下的系统重构

论述三轴对地稳定遥感卫星姿控系统中部分轮子或部分陀螺故障情况下的姿控系统重构。文中论述了只在俯仰通道有一偏置动量轮正常工作，而滚动和偏航通道轮子故障条件下的系统重构。另外还论述了偏航陀螺故障，姿控系统其它部件正常情况下，控制系统采用Whecon原理与PIM控制相结合的设计。以上两种系统重构拟用于实际系统中，经过数学仿真验证，姿控系统在故障情况下能够完成基本任务。