最大时间间隔误差计算方法及其分析

首先给出了基于MTIE估计基本定义的直接计算方法,然后介绍了可使MTIE计算时间大为缩短的判别准则方法,并对这两种方法进行了比较,指出了各自方法的优缺点.     

基于SPCE061A数字语音温度控制系统的设计

以凌阳SPCE061A单片机为控制核心,设计并制作了一款具有温度设定灵活、数字显示及语言播报功能的水温控制器,通过PID控制算法产生脉宽调制波,提高了控制精度。实践表明:该水温控制器达到了设计要求,有一定的实用开发价值。     

复杂测量系统中时间的系统误差测量方法

长距离的复杂测量系统中,由于传输通道不同,引入的传输延迟时间变化不同,导致原有时间关系的误差引入。介绍了几种可行的系统误差测量方法,以消除系统误差对信号间时间关系的影响,同时达到检验测试系统安排是否存在问题的目的。     

民用直升机脉动总装生产线规划研究

飞机装配日趋向站位式、脉动化总装生产线方向发展。装配分离面的选择对飞机脉动总装生产线建设至关重要。通过分析直升机装配流程特点,探讨直升机结构分离面选择的利弊,研究直升机装配分离面对站位化总装生产线建设的影响,归纳了站位化总装生产线设计的基本原则和方法,为直升机总装生产线建设提供了思路。     

双向比对高精度物理时间同步方法

提出一种面向未来卫星在轨应用的闭环物理高精度时间同步方法。比较了所提方法与其他时间同步方法的区别与优势，建立了远程系统时间同步基本模型与误差传递模型，基于双向测距和时间传递技术分析了高精度钟差获取原理，给出了时钟调整环路的时域频域参数依赖关系。完成了高精度时间同步地面试验系统构建，测试了开环非调钟状态下钟差测量精度误差、闭环调钟状态下时间同步准确度误差以及长时运行情况下的时间同步监测结果。测试结果表明，该方法能够实现优于1 ns量级的时间同步，为高精度时间同步技术研究提供了新的途径。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

基于CAN总线的ECU测控软件的设计与实现

设计并实现了一种基于CAN总线的MCS自动测控系统,可以直接获取ECU产品中的核心数据,修改重要参数,并且可以更新ECU程序,为ECU的自主研发提供了检验支持。ECU系统的控制程序使用Ec lipse3.5.2＋w indowbu ilder开发具有友好人机交互界面的MCS主机端平台控制软件,使得数据的显示控制以及解析更加直观简明。实测结果显示,MCS软件的设计与实现减少了ECU国产化的工作量,加快了ECU的研发进程。     

空间激光通信系统中的信道纠错编码技术

由于空间激光通信系统的信道状态和链路捕获跟踪的不确定性,多种形式的信道纠错编码技术正被广泛发展研究。结合空间激光通信链路中误码性能的主要影响因素,分别选择合适的编码方案进行分析。通过仿真实验可知,对于在大气结构参数为1.5×10~(-14) m~(-2/3)、风速为20 m/s的空地激光链路的环境下,在系统数据速率为2 Gbit/s、要求误码率为10~(-6)时,LDPC码结合交织码相对未编码系统有3 dB的等效编码增益,LT码相对未编码系统有3.8 dB的等效编码增益。提供了一种能快速生成、扩展和校验的编码和交织实现方法,以抵抗大气湍流的快速变化对系统性能产生的影响。     

高超声速圆锥边界层失稳条纹结构实验研究

边界层转捩的准确预测是高超声速飞行面临的关键气动问题之一。为研究高超声速边界层失稳和转捩机理,以前缘半径1.6mm、半锥角7°的圆锥模型为研究对象,在FD-07高超声速风洞中采用红外热图技术开展边界层转捩实验测量。通过与工程计算结果对比,确认模型表面边界层流态。实验结果表明:有迎角条件下,模型表面中后段出现条纹结构,条纹结构的起始位置随着周向角的增加而向上游移动;随着迎角的增加,条纹起始位置向上游移动,条纹强度差异和条纹与模型中心线的夹角越来越大。实验获得的条纹结构与不同频率扰动波相互作用直接数值模拟获得的条纹结构现象一致。通过对比分析,认为边界层内不同频率扰动波相互作用是产生条纹结构的一种机制。     

Multi-level virtual prototyping of electromechanical actuation system for more electric aircraft

Electromechanical actuators (EMAs) are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safety-critical aerospace applications like flight controls: huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design. Best practices supported by Bond graph formalism are suggested to develop a model’s structure efficiently and to make the model ready for use (or extension) by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.