椭圆轨道编队常值推力构形变化控制方法

采用T-H方程作为椭圆轨道编队的动力学描述，推导了常值推力作用下的椭圆轨道编队的构形变化控制方法。通过合理的选择控制量的作用时刻，可达到大量节约燃料的目的。结合该构形控制方法给出了燃料均衡与燃料最优的解决方案；最后，给出的仿真算例说明了本文设计方法的有效性。     

某动力调谐陀螺挠性接头抗冲击能力分析

挠性接头是动力调谐陀螺中最薄弱的部分，在运输时，外界和弹体自身的振动和冲击不可避免地对挠性接头的薄弱环节造成较大的影响，对接头抵抗冲击能力的研究可以帮助制定储运策略。为了弄清某型动力调谐陀螺的挠性接头承受冲击载荷的能力，论文首先建立了陀螺的离散动力学模型，通过直接积分法得到系统在特定冲击作用下的响应，并根据响应得到挠性结构的变形；然后采用有限元方法计算挠性部分的应力和变形的对应关系，进而获得接头挠性结构处的应力；最后运用累积损伤理论对挠性接头的疲劳寿命进行了估算。结果表明该型陀螺能承受的极限冲击加速度约为150g-180g。     

导弹电液伺服机构的变论域自适应模糊滑模控制

为减弱导弹电液伺服机构位置跟踪滑模控制(SMC)的抖振,提出了一种基于变论域自适应模糊滑模控制(AFSMC)方法。通过在线调节输入变量论域和规则后件隶属度函数,可在不影响滑模变结构控制鲁棒性的情况下有效削弱滑模切换控制产生的抖振。给出了相应的控制律。设计的控制系统具有良好的跟踪性能,提高了电液伺服机构的跟踪控制精度。仿真实验结果验证了该控制方案的有效性。     

航天器姿态调整时的变结构控制与振动抑制方法

基于Hamilton变分原理,采用Timoshenko梁理论,对带有柔性附件的航天器建立了中心刚体—柔性梁的动力学模型。研究了调姿时带有柔性附件的航天器的动力学与控制问题,给出了问题的滑模变结构控制方法。基于Lyapunov方法证明了姿态的渐近稳定性。利用数值仿真过程讨论了卫星姿态角和姿态角速度的变化规律。最后,利用仿真结果验证了变结构控制方法的可行性和有效性。     

激波在狭缝中绕射过程研究

针对固体火箭发动机药柱存在裂纹的情况，对运动激波在狭缝中绕射传播的非定常流场进行了计算，得到了清晰的流场变化图谱，从流场图中可分辨出激波在狭缝中的传播过程。对不同深宽比的狭缝进行研究，发现流场结构存在明显差别，在深宽比较小时狭缝内压力波振荡较小，当深宽比超过一定值时狭缝内的压力波产生剧烈振荡。研究结果表明，该方法可很好地描述激波在狭缝中的传播过程。     

翼柱型装药发动机点火升压过程计算

利用实验获得的翼槽内火焰传播规律经验公式,在Ｐ（ｔ）模型的基础上,建立了翼柱型发动机的点火升压计算模型。计算结果与实测数据吻合较好。同时就点火器流量、推进剂燃速、喷管堵盖打开压强等设计参数对发动机点火升压过程的影响进行了分析。     

TETHERED SATELLITE SYSTEM ANALYSIS (1) — TWO-DIMENSIONAL CASE AND REGULAR DYNAMICS

The study on tethered satellite system (TSS) in two-dimensional in-planar motion is restricted in that the tether is assumed to be massless. The equations of motion are given in a spherical coordinate system to describe the magnitude (tether length) and direction angle of the position vector between the satellites. A length rate control algorithm is adopted, and the controlled motion of the directional angle by the algorithm will have a stable equilibrium state. The equilibrium state is a fixed point if the orbit of the base-satellite is circular, and a limit cycle if the orbit is elliptic. The value and stability of the equilibrium state are determined by the parameters of the control algorithm, and the bifurcation analysis is also given. Two typical TSS missions have been simulated.     

基于RBF网络的惯导系统初始对准

建立了惯导系统（ＩＮＳ）初始对准的线性和非线性误差模型。分析了径向基函数（ＲＢＦ）网络的结构和工作原理。研究了ＲＢＦ网代替初始对准中的卡尔曼滤波器的实现方法。通过仿真表明，用神经网络进行初始对准，既可获得与卡尔曼滤波相同的对准精度，又提高了系统的实时性。     

VentureStar… reaping the benefits of the X-33 program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar^TM, the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar^TM are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream. Furthermore, the market derived requirements need to be assessed so as not to impose unnecessary requirements on the vehicle design that add unreasonable cost to the development of the system, yet provides the right capabilities for new markets that could be triggered by dramatically lower space transportation prices.     

掺磷纳米硅薄膜的微结构

采用喇曼(Raman)散射谱、高分辨率电子显微镜(HRTEM)和原子力显微镜(AFM)对掺磷纳米硅薄膜的微结构进行了分析,并对纳米硅薄膜的传导机制进行了探讨.结果表明:掺磷纳米硅薄膜由尺寸为2～4*#nm的晶粒和2～3个原子层厚的非晶界面构成,计算得到薄膜的晶态比为40%～55%.与本征纳米硅薄膜相比,掺磷纳米硅薄膜晶粒尺寸和晶态比没有明显变化,电导率却提高了2个数量级.随着掺磷浓度增加,纳米硅薄膜的晶粒尺寸、晶态比及电导率逐渐增大.AFM观察表明掺磷纳米硅薄膜由尺寸介于15～20*#nm的团簇构成,团簇排列具有带状特征.