Experimental investigation and correlation development of jet impingement heat transfer with two rows of aligned jet holes on an internal surface of a wing leading edge

Extensive experimental studies on the heat transfer characteristics of two rows of aligned jet holes impinging on a concave surface in a wing leading edge were conducted, where50000 Rej 90000, 1.74 H/d 27.5, 66° a 90°, and 13.2 r/d 42.03. The finding was that the heat transfer performance at the jet-impingement stagnation point with two rows of aligned jet holes was the same as that with a single row of jet holes or the middle row of three-row configurations when the circumferential angle of the two jet holes was larger than 30°. The attenuation coefficient distribution of the jet impingement heat transfer in the chordwise direction was so complicated that two zones were divided for a better analysis. It indicated that: the attenuation coefficient curve in the jet impingement zone exhibited an approximate upside-down bell shape with double peaks and a single valley; the attenuation coefficient curve in the non-jet impingement zone was like a half-bell shape, which was similar to that with three rows of aligned jet holes; the factors,including Rej, H/d and r/d, affected the attenuation coefficient value at the valley significantly.When r/d was increased from 30.75 to 42.03, the attenuation rates of attenuation coefficient increased only by 1.8%. Consequently, experimental data-based correlation equations of the Nusselt number for the heat transfer at the jet-impingement stagnation point and the distributionof the attenuation coefficient in the chordwise direction were acquired, which play an important role in designing the wing leading edge anti-icing system with two rows of aligned jet holes.     

一种基于RS码的宽间隔跳频序列生成方法

针对目前基于RS码生成的非重复跳频序列周期较短、序列复杂度较低、工程实用性不强等缺点,提出一种改进的RS码宽间隔跳频序列生成方法。使用长周期的RS码,采用非线性转移矩阵法将其转换为跳频序列,再用对偶频带法对其进行宽间隔处理。性能仿真结果表明,与以往的方法相比,改进的跳频序列在增加了序列复杂度的情况下,仍具有良好的均匀性、随机性和汉明相关性,且实现较简单,工程实用性较强。     

运输环境中某战术导弹结构振动特性分析

应用三维有限单元和导弹实体简化模型对一种战术导弹的结构振动特性进行分析，并动用ＡＮＳＹＳ有限元分析程序，计算得到了“自由－固支”条件下，导弹竖立状态的固有模态，取得了与试验和数据基本一致的结果，证明了所建模型物正确性，进而对运输环境中导弹水平支承条件下的固有频率和振型进行了分析计算，所得结果为导弹的使用可靠性分析提供了依据。     

基于莫尔条纹测量法设计的船体变形测量系统

介绍了一种基于莫尔条纹测量法设计的船体变形测量系统,分析了测量精度,并通过模拟实验证明了其可行性。     

基于CATIA V5系统的复杂机加件模线样板设计方法探索

模线样板是检验零件几何尺寸和外形轮廓的量具,在航空制造中有着极其重要的作用.对于复杂的机加件,其空间曲面的展开和结构轮廓的提取一直是机加件模线样板设计过程中的一个技术难题.针对飞机复杂机加零件模线样板设计中的两类典型问题提出三种有效、实用的解决方法,即"边界拟合曲面法"、"分割生长提取法"和"草图线面相合法".     

基于软件工程思想方法的CAI课件开发

介绍了软件工程思想方法，运用软件工程思想方法基于瀑布模型分析了CAI课件开发过程，实践创作开发了基于Web的多媒体《概率论与数理统计》CAI课件。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

主控格栅反射器基体结构/压电作动器参数集成优化设计

为提高反射器形面控制能力和减小在轨热变形，本文以锆钛酸铅压电陶瓷(PZT)驱动的主控格栅反射器为研究对象，开展反射器基体结构和PZT压电作动器参数的集成优化设计研究。首先，建立主控格栅反射器有限元模型并通过实验验证了有限元模型的正确性。然后，以形面控制能力最大和热变形最小为目标函数，以设计变量上限、下限和结构基频为约束，采用遗传算法(GA)和非支配排序遗传算法(NSGA II)求解。最后，给出多个仿真算例的优化结果。仿真结果表明，控制能力最大的单目标优化，其热变形远大于控制能力，多目标的帕累托(Pareto)最优前沿可以给出更合理的设计方案。通过优化设计可以显著提高形面控制能力和减小热变形。     

基于1553B和SpaceWire组合网络的星载数据管理软件设计

为同时满足对于星务管理数据和高速载荷数据的传输要求,国内外的飞行器趋于使用1553B和SpaceWire组合网络来进行星上数据传输。复杂而灵活的数据传输要求使得卫星数据流设计中引入了大量标准协议,同时大大增加了星载数据管理软件的复杂度。对一种基于1553B和SpaceWire组合网络的星载数据管理软件的协议体系进行了介绍,通过对协议进行分析,改进了已有的软件框架,形成了一种基于标准协议的分层的软件架构,以空间包为单位实现星内数据交互,实现了软件应用层与数据链路协议的分离。软件实现结果表明,合理的协议分层和有效的接口封装提高了软件的可拓展性和可移植性,有利于软件产品化。     

芳纶复合材料用湿法环氧配方的研究

在综合考虑粘度，力学性能和储存期的基础上，研制了以混合芳香胺为固化剂的芳纶用湿法环氧配方， 注浇体力学与俄，美等国家湿法环配方及我国高性能干法配方性能相当，实验证明该湿法环氧配方与Ｆ－１２纤维浸润性及界面粘接性能均较高，其ＮＯＬ环强度转化率均达８７％。