基于工业物联网的混流车间机器人自适应调度

随着工业物联网技术与人工智能技术深度融合,物料机器人已广泛应用于物联网车间中.针对车间存在实时动态变化和状况不确定等诸多复杂因素,本文提出以组分层建树和以实时状态为根节点的SP–MCTS(Single-player monte-carlo tree search algorithm)搜索方法实现车间自适应调度决策.该方...     

TIG补焊对2219铝合金搅拌摩擦焊接接头微观组织及性能影响

通过对原始搅拌摩擦焊（FSW）接头中间位置进行缺口挖补以模拟焊缝缺陷,采用钨极氩弧焊（TIG）补焊对其进行焊缝缺陷修复试验,研究该补焊工艺对接头微观组织及力学性能的影响规律,为贮箱的FSW焊缝性能评价提供技术支撑和后续工程指导。结果表明,相较于FSW接头,补焊接头TIG焊缝区主要由较大的等轴树枝晶组成,且与FSW焊缝交界处相互掺杂着粗大等轴晶和细小等轴晶;补焊接头固溶区受热循环影响较大,晶粒较为粗大,而过时效区受热循环影响较小,会发生过时效化并形成软化区。补焊接头抗拉强度与延伸率相较于原始FSW接头有所降低,硬度分布大致呈“W”形,WNZ区为硬度值最低处;补焊接头断裂位置始于焊趾处,断口存在大量韧窝,同时韧窝内存在第二相粒子,呈现韧性断裂机制。     

动静圆柱坐标系下N-S方程的分区算法及子域干涉处理研究

耦合了相对和绝对圆柱坐标系下三维Navier-Stokes方程,统一了动子域和静子域的控制方程;在子域计算中,采用高分辨率的三阶ENN格式及LU-SGS隐式解法;在子域干涉处理中,研究并对比了动静子域干涉面的重合处理与重叠处理;最终发展了一种新的既高效又准确的分区算法。通过对某带进口导叶的三级跨声速轴流压气机叶栅内三维紊流流场的数值模拟,验证了该分区算法的有效性,计算结果与实验数据吻合较好。     

某型发动机进口压力畸变实验研究与分析

发动机进口流场畸变是影响发动机稳定性的一个很关键的降稳因子,而进口压力场周向分布不均匀对燃气涡轮发动机的稳定工作范围有很大影响.通过对某型涡喷发动机进行进口压力畸变模拟实验,探讨了发动机进口流场压力畸变的实验程序和方法,通过对实验数据的分析和处理,确定了该型发动机的稳定性对进气压力畸变的敏感程度.     

基于微电铸工艺的摩擦接触式微型惯性开关

针对微型惯性开关闭合时间短、接触弹跳问题,设计了增强接触效果的摩擦接触式微型惯性开关.基于MEMS惯性开关工作原理,建立了开关物理模型,研究了不同类型惯性开关的闭合性能,提出了增强接触的摩擦接触方法,设计了摩擦接触式微型惯性开关的结构.为了对比接触性能,基于UV–LIGA叠层光刻和精密微电铸工艺,研制了3种不同类型的惯...     

基于ANSYS的薄壁件反重力铸造充填形态的数值模拟

介绍了CFD的基本原理以及有限体积法的概念,采用ANSYS 6.0进行网格划分和控制方程的计算,模拟了不同壁厚、不同充型速度下薄板铸件的反重力充型形态,得出了壁厚,充型速度对充型形态的影响规律。     

射线检测厚度宽容度的分析与测定

厚度宽容度是变截面工件射线检测的重要参数。本文分析了典型工件的厚度差,以及不同灵敏度级别的厚度宽容度。应用胶片特性曲线、曝光曲线,从实验角度测量了厚度宽容度,并对结果作了分析和讨论。     

基于响应面法的超燃冲压发动机进气道多目标优化

基于响应面法进行了二维混合压缩超燃冲压发动机进气道的多目标优化研究.采用均匀试验设计确定试验方案,运用计算流体动力学求解进气道的性能.根据分析结果构造了响应面近似模型,该模型采用了完全二阶多项式模型.通过响应面近似模型的优化,实现了超燃冲压发动机进气道优化,得到了Pareto最优集.结果表明,采用均匀试验设计和响应面法可以大大减小数值模拟的计算量,提高优化效率.     

Area-oriented coordinated trajectory planning of dual-arm space robot for capturing a tumbling target

The growing amount of space debris poses a threat to operational spacecraft and the long-term sustainability of activities in outer space. According to the orbital mechanics, an uncontrolled space object will be tumbling, bringing great challenge to capture and remove it. In this paper, a dual-arm coordinated ‘‘Area-Oriented Capture"(AOC) method is proposed to capture a non-cooperative tumbling target. Firstly, the motion equation of the tumbling target is established, based on which, the dynamic properties are analyzed. Then, the ‘‘Area-Oriented Capture"concept is presented to deal with the problem of large pose(position and attitude) deviation and tumbling motion. An area rather than fixed points/devices is taken as the object to be tracked and captured. As long as the manipulators' end-effectors move to a specified range of the objective areas(not fixed points on the target, but areas), the target satellite will be hugged by the two arms.At last, the proposed method and the traditional method(i.e. fixed-point oriented capture method)are compared and analyzed through simulation. The results show that the proposed method has larger pose tolerance and takes shorter time for capturing a tumbling target.     

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.