PMHT: problems and some solutions

The probabilistic multihypothesis tracker (PMHT) is a target tracking algorithm of considerable theoretical elegance. In practice, its performance turns out to be at best similar to that of the probabilistic data association filter (PDAF); and since the implementation of the PDAF is less intense numerically the PMHT has been having a hard time finding acceptance. The PMHT's problems of nonadaptivity, narcissism, and over-hospitality to clutter are elicited in this work. The PMHT's main selling-point is its flexible and easily modifiable model, which we use to develop the "homothetic" PMHT; maneuver-based PMHTs, including those with separate and joint homothetic measurement models; a modified PMHT whose measurement/target association model is more similar to that of the PDAF; and PMHTs with eccentric and/or estimated measurement models. Ideally, "bottom line" would be a version of the PMHT with clear advantages over existing trackers. If the goal is of an accurate (in terms of mean square error (MSE)) track, then there are a number of versions for which this is available.     

Thermoluminescent dose measurements on-board Salyut type orbital stations.

A small, vibration- and shock-resistant thermoluminescent dosemeter /TLD/ system--named PILLE--was developed at the Health Physics Department of the Central Research Institute for Physics, Budapest, to measure the cosmic radiation dose on board orbital stations. The first on-board measurements with this system were performed /by B. Farkas, the Hungarian astronaut/, on the Salyut-6 space station in 1980. The same instrument was used by other crews in the following years. Doses measured at different sites in Salyut-6 are presented. The dose rates varied from 0.07 to 0.11 mGy.day-1. After the first cosmic measurements, the system was further developed. The minimum detectable dose of the new TLD system is 1 microGy, i.e. less by on order of magnitude than that of the former system. The self-irradiation dose rate of the TLD bulbs is also reduced--by more than one order of magnitude--to 10 nGy.h-1, by the use of potassium-free glass for the bulb envelope. This new type of PILLE TLD system is currently on-board Salyut-7. The dose rates /0.12-0.23 mGy.day-1/ measured in 1983 are presented in detail.     

Eliminating Reference Loop Phase Shift in Adaptive Arrays

Adaptive array processors utilizing the Widrow LMS algroithm with an internally generated reference signal have been shown to be subject to weight cycling caused by phase shift in the reference extracting loop. Adaptive compensation schemes that eliminate the reference loop phase shift are suggested here. Two such schemes are proposed. They differ in the amount of hardware complexity needed as well as in the rate at which each one eliminates the phase shift. Computer calculations are used to compare the rates of convergence of the two schemes.     

Variations of density scale height between 300 and 400 km

Density data from the French CACTUS accelerometer are used to determine values of density scale height. An analysis shows a diurnal effect in the variations of scale height. There exists a correlation between geomagnetic activity and variations of scale height. Variations of the gradient of scale height are shown and analysed.     

Multisensor tracking of a maneuvering target in clutter

An algorithm is presented for tracking a highly maneuvering target using two different sensors, a radar and an infrared sensor, assumed to operate in a cluttered environment. The nonparametric probabilist data association filter (PDAF) has been adapted for the multisensor (MS) case, yielding the MSPDAF. To accommodate the fact that the target can be highly maneuvering, the interacting multiple model (IMM) approach is used. The results of single-model-based filters and of the IMM/MSPDAF algorithm with two and three models are presented and compared. The IMM has been shown to be able to adapt itself to the type of motion exhibited by the target in the presence of heavy clutter. It yielded high accuracy in the absence of acceleration and kept the target in track during the high acceleration periods     

A noise insensitive solution to an ambiguity problem in spectralestimation

The instantaneous frequency measurement (IFM) receiver is capable of measuring the center frequency of single frequency pulses over a wide range (bandwidth) of center frequencies. Because of various constraints, the frequency resolution requirement results in long correlator delay times that reduce the single correlator bandwidth. A large bandwidth can be achieved only if two or more correlators are used. The problem of estimating frequency is then reduced to the simultaneous congruence problem of number theory. A design procedure is presented for solving the congruence problem for a given amount of noise protection, a stated frequency resolution, a minimum bandwidth, and a fixed level of precision (bits) in the IFM receiver     

MTI Processing and Weibull-Distributed Ground Clutter

It is shown that the Weibull-distributed ground clutter obeys a Weibull distribution after processing by the double canceler moving target indicator (MTI).     

Organisation of a unified system of energetic calibration of X-ray experiments

X-ray data obtained by the Prognoz 5,6,7 and 8 hard X-ray photometers are compared with the measurements carried out by similar instruments aboard the Solrad 11, ISEE 3, SMM and Hinotori satellites. Using the method of relative amplitude analysis, the apparent disagreement in the energy discrimination level calibration between the instruments is pointed out. The results of the comparison and the possible sources of disagreement are given. We suggest an international effort be made to develop a system of uniform pre-launch calibration of photometers based on a reference calibration source.     

Localization performance of arrays subject to phase errors

The passive localisation of radiating sources using an array subject to random perturbations in sensor phases is presented. All source signals as well as additive noises observed at the sensors are assumed to be independent identically distributed zero-mean Gaussian random processes. Cramer-Rao bounds are derived for source bearings and ranges for the phase errors at each sensor. It is shown that accurate phase calibration can be achieved when the number of sources exceeds a certain minimum. The locations of the calibrating sources need not be known a priori and need only satisfy mild regularity conditions. A calibration procedure is proposed which uses maximum-likelihood techniques     

Electromagnetic containerless undercooling facility and experiments for the shuttle

An electromagnetic furnace is being prepared for flights aboard the space shuttle. This apparatus is capable of melting metals and alloys up to 1400°C melting point by induction heating with subsequent solidification of the freely levitated melt without contact with any container. The solidification can be carried out with greatly reduced fields resulting in minimal heating and stirring of the free melt. Sequential specimens can be processed during flight. Several experiments are planned for a series of flights, beginning in 1985 with an undercooling experiment on NiSn alloys. These will be interspersed with detailed studies of fluid flow caused by low and high field levels in order to quantify the corresponding effect upon the solidification process.