歼击机载荷谱编制方法的研究

 <正> 1.引言 国内外大量的研究表明,编制飞机载荷谱应考虑载荷的大小,频数、顺序和分布这四方面的因素,只有在这四方面都摸拟了飞机实际飞行情况,才能保证载荷谱的真实性。 程序块谱只考虑了载荷的大小和频数,所以逐渐被飞-续-飞谱所取代,飞-飞谱是按一个飞行接一个飞行编制的载荷谱。由空测数据编制这种谱的常规方法是先对法向过载系数ny进行计数处理,得到某个任务段(或任务剖面)内ny的大小和频数,而后将计数结果在该任务段(或任务剖面)内离散,生成ny的随机序列。与此同时,给出其它各主要气动参数的概率分布,然后按概率的大小组合成几种典型的飞行状态,再由飞行状态计算出对应的载荷分布。最后以这几种载荷分布为基础,根据ny的大小进行线性折算,得到各级ny下的载荷和载荷分布。     

开关磁阻调速电动机非线性分析

开关磁阴电机系统是性能优良的新型调速电动机系统。本文阐述了双凸极磁阻电机的非线性二维磁场的数值计算方法,据此进行了系统主电路的非线性网络数字分析,进而作了不同工作条件下的电流波形仿真、系统性能计算及控制参数的优化选择,初步实现了开关磁阻调速电动机系统的计算机辅助分析。并通过所研制的500W样机的具体计算和试验验证,证明计算和实测结果是吻合的。     

固体发动机试车燃气中HCl和Al2O3扩散研究

对固体火箭发动机试车燃气的组成，抬升和扩散，采用高斯模式与环境监测相结合的方式进行了系统研究，评价了不同大气稳定度下ＨＣｌ和Ａｌ２Ｏ３浓度的分布，提出了有效的防治措施。     

脉冲爆震发动机部分填充效应理论分析

为了研究脉冲爆震发动机的部分填充效应,建立了不依赖于实验数据的通用理论分析模型。将该理论模型得到的计算结果与实验数据进行对比,误差在15%以内。并应用该模型进行了一些算例计算,计算结果表明:部分填充能显著增加比冲,理论比冲最高能接近600s;比冲增益随填充系数的减小而增大,最后趋于某一上限值,计算中,该上限值最高达到4;采用氧气作氧化剂时不仅比采用空气作氧化剂时的比冲更高,而且比冲增益也更大;不可燃气体密度越大,部分填充产生的比冲增益越大;背压降低,部分填充产生的比冲增益也随之减小。     

优化抗差自适应滤波器在深组合导航中的应用

为了提高惯性/卫星深组合导航系统的滤波性能,在抗差自适应滤波算法的 基础上,研究了一种优化抗差自适应滤波算法。该算法通过比较实际预测残差协方差矩 阵和理论协方差阵的差值来生成自适应因子,从而优化抗差自适应滤波。将所研究的算 法应用于惯性/卫星深组合导航系统, 在高动态环境下进行仿真验证, 并与常规卡尔曼 滤波、抗差自适应滤波进行比较。结果表明,优化算法能有效地控制观测异常和动态模 型异常对状态参数估值的影响,所得组合导航位置误差和速度误差明显减小,提高了组 合导航系统的滤波精度。     

Singular formalism and admissible control of spacecraft with rotating flexible solar array

This paper is concerned with the attitude control of a three-axis-stabilized spacecraft which consists of a central rigid body and a flexible sun-tracking solar array driven by a solar array drive assembly. Based on the linearization of the dynamics of the spacecraft and the modal identi- ties about the flexible and rigid coupling matrices, the spacecraft attitude dynamics is reduced to a formally singular system with periodically varying parameters, which is quite different from a space- craft with fixed appendages. In the framework of the singular control theory, the regularity and impulse-freeness of the singular system is analyzed and then admissible attitude controllers are designed by Lyapunov＇s method. To improve the robustness against system uncertainties, an H∞ optimal control is designed by optimizing the H∞ norm of the system transfer function matrix. Comparative numerical experiments are performed to verify the theoretical results.     

微结构谐振传感器

阐述了频率输出的新型谐振传感器的发展方向之一——微型化。评价性地论述了热激励硅谐振压力传感器和热激励谐振膜质量流量传感器。重点讨论了热激励的原理,特点等。指出我国应对传感器的这一发展趋势给予足够的重视。     

An equivalent ground thermal test method for single-phase fluid loop space radiator

Thermal vacuum test is widely used for the ground validation of spacecraft thermal control system. However, the conduction and convection can be simulated in normal ground pressure environment completely. By the employment of pumped fluid loops’ thermal control technology on spacecraft, conduction and convection become the main heat transfer behavior between radiator and inside cabin. As long as the heat transfer behavior between radiator and outer space can be equivalently simulated in normal pressure, the thermal vacuum test can be substituted by the normal ground pressure thermal test. In this paper, an equivalent normal pressure thermal test method for the spacecraft single-phase fluid loop radiator is proposed. The heat radiation between radiator and outer space has been equivalently simulated by combination of a group of refrigerators and thermal electrical cooler(TEC) array. By adjusting the heat rejection of each device, the relationship between heat flux and surface temperature of the radiator can be maintained. To verify this method,a validating system has been built up and the experiments have been carried out. The results indicate that the proposed equivalent ground thermal test method can simulate the heat rejection performance of radiator correctly and the temperature error between in-orbit theory value and experiment result of the radiator is less than 0.5 C, except for the equipment startup period. This provides a potential method for the thermal test of space systems especially for extra-large spacecraft which employs single-phase fluid loop radiator as thermal control approach.     

推力矢量飞机的起飞性能研究

简述推力矢量技术的作用,建立了带三轴推力矢量飞机的起飞滑跑段运动方程,通过数值仿真探讨了推力矢量的偏转大小对起飞性能的影响,对不同推力矢量偏转下飞机起飞性能的仿真计算结果进行了分析。仿真结果表明,采用直接力控制可以明显提高飞机的起飞性能。     

湍流转捩工程预报方法研究进展综述

湍流转捩现象对边界层流动的阻力和热交换特性具有严重影响。准确地预测转捩对工程设计意义重大。近年来发展迅速的转捩模型是一种非常适合工程计算的转捩预报方法。本文将转捩模型分成了4个类型,并对每种转捩模型的发展过程加以阐述。在分析和讨论的基础上,总结了目前转捩模型的发展水平,同时也指出尚存的不足之处,为将来构建新的转捩模型以及相关的转捩研究提供建议。