GRACE gravity field modeling with an investigation on correlation between nuisance parameters and gravity field coefficients

The GRACE (Gravity Recovery And Climate Experiment) monthly gravity models have been independently produced and published by several research institutions, such as Center for Space Research (CSR), GeoForschungsZentrum (GFZ), Jet Propulsion Laboratory (JPL), Centre National d’Etudes Spatiales (CNES) and Delft Institute of Earth Observation and Space Systems (DEOS). According to their processing standards, above institutions use the traditional variational approach except that the DEOS exploits the acceleration approach. The background force models employed are rather similar. The produced gravity field models generally agree with one another in the spatial pattern. However, there are some discrepancies in the gravity signal amplitude between solutions produced by different institutions. In particular, 10%–30% signal amplitude differences in some river basins can be observed. In this paper, we implemented a variant of the traditional variational approach and computed two sets of monthly gravity field solutions using the data from January 2005 to December 2006. The input data are K-band range-rates (KBRR) and kinematic orbits of GRACE satellites. The main difference in the production of our two types of models is how to deal with nuisance parameters. This type of parameters is necessary to absorb low-frequency errors in the data, which are mainly the aliasing and instrument errors. One way is to remove the nuisance parameters before estimating the geopotential coefficients, called NPARB approach in the paper. The other way is to estimate the nuisance parameters and geopotential coefficients simultaneously, called NPESS approach. These two types of solutions mainly differ in geopotential coefficients from degree 2 to 5. This can be explained by the fact that the nuisance parameters and the gravity field coefficients are highly correlated, particularly at low degrees. We compare these solutions with the official and published ones by means of spectral analysis. It is found that our solutions are, in general, consistent with others in the spatial pattern. The water storage variations of the Amazon, Chari and Ganges river basins have also been computed. The variations computed with the NPARB approach are closer to those produced by JPL and DEOS solutions, while the variations produced with the NPESS approach are in good agreement with those produced by the CSR and GFZ solutions. A simulation study is implemented with considering realistic noise and low-frequency error. The two approaches are used to recover the true model. The NPESS solution appears closer to the true one. Therefore we are inclined to estimate the nuisance parameters simultaneously with the geopential coefficients.     

卫星控制系统测试数据自动判读系统设计

针对卫星控制系统测试数据类型多和数据量大的特点,人工判读方式存在判读时间长和判读精度不够高等不足,分析了卫星控制系统测试数据的变化规律,建立了测试数据的判读规则,在此基础上完成自动判读方法设计和自动判读系统设计,该系统能够按照设置的判读规则进行自动判读,对判读结果进行实时显示和存储,提高了测试效率和判读的准确性.     

多级压气机中可控扩散叶型研究的进展与展望 第二部分 可控扩散叶型的实验与数值模拟

目前 ,大量的可控扩散叶型 (CDA)已设计应用于多级轴流压气机中。通过亚音、跨音叶栅实验 ,证明了在可比的气动设计条件下 ,CDA叶栅可以达到更高的临界马赫数、更大的冲角范围和更高的负荷。通过单级或多级测试 ,CDA提供了更高的效率、更高的负荷、且易于进行级间匹配 ,并最终减少研发费用 ,提高喘振裕度 ;由于 CDA叶型具有增厚的前缘和尾缘 ,这为压气机寿命的提高提供了保证     

某型涡轮轴发动机稳态气路故障诊断方法

本文是涡轮轴发动机稳态气路故障诊断方法研究的结果。根据监控功能要求 ,应用气路参数分析法 ,确定反映部件性能参数变化的测量参数 ,建立故障诊断模型 ,探讨分别应用 6个和 4个测量参数诊断气路部件故障的方法     

吸力面翼刀控制压气机叶栅二次流的实验研究

在低速风洞上通过详细测量叶栅的出口流场 ,研究了叶片吸力面上不同高度处加翼刀对压气机叶栅损失和二次流的影响。实验结果表明 ,合理地选择翼刀安装位置 ,可有效地控制压气机叶栅的二次流 ,降低叶栅的总损失。     

外端壁收缩与单向倾斜组合涡轮导叶的三维气动力研究

低展弦比涡轮导叶的外端壁收缩与单向正倾斜组合设计是既可减小两端二次流损失又可以满足冲击冷却叶片叶身需平直要求的技术措施。本文简要阐述了组合设计可减小二次流损失的力学机制、流场特征及三维流场设计分析的评价准则。通过三维流场计算 ,详细分析了诸如单向倾斜角度、子午面外端壁轮廓收缩起点、内外曲率半径等主要特征参数对流场品质的影响。给出了组合设计的方法与步骤及评价流场的定性准则。该组合设计方法对低展弦比高温涡轮导向叶片的成功设计具有指导意义。     

用纤内Bragg光栅进行动态应变测量的研究

描述了用纤内Bragg光栅进行动态应变测量研究的意义，原理和方法，提出了两种用纤内Bragg光栅动态应变测量时进行Bragg波长偏移量的解调方法；光干涉相位检测Bragg光栅反射波长偏移的解调方法和用DWDM密集波分复用器解调Bragg波长的方法，前者适用于高频宽带动态应变测量，后者适用于有限频率或中等频率响应的动态应变测量。     

具有软件特征的一种CTI应用模式

计算机电信集成技术是 2 0世纪 90年代新兴的计算机通信技术。通过使用最新的数字处理技术 ,CTI把计算机和通信紧密地结合到一起。本文论述目前CTI的发展趋势 ,即传统呼叫中心与WEB呼叫中心统一的方案向“软件”方向靠拢的趋势 ,核心是提出一种分层的CTI体系结构。     

运输机总体参数和性能统计分析

 按照飞机设计的基本原理,通过对现有运输机总体参数和性能数据的统计分析,寻找现代运输机各个总体性能和性能参数之间存在的定量关系,得到了 1 6个经验公式和一些参数取值范围,为运输机概念设计提供了一些可用的数据。