喷丸强化10Ni3MnCuAl钢的表面性能

对10Ni3MnCuAl钢磨削表面进行不同强度的喷丸强化处理,分析了喷丸强化后10Ni3MnCuAl钢的金相组织及喷丸表层下微观结构的变化,测量了喷丸影响层的显微硬度以及喷丸强化所形成的残余压应力场, 研究了喷丸所造成显微硬度、金相组织和表面残余应力等表面完整变化.结果表明, 喷丸强化可显著改善10Ni3MnCuAl钢表面完整性及其疲劳寿命. 喷丸强度高时将产生过喷效应,导致疲劳寿命的降低,实验测得最佳喷丸强化弧高值为0.40 mm时表面质量最好,喷丸影响层的残余应力深度达450 μm.     

电子设备的"三防"设计

本文针对电子设备的"三防"性能设计问题,从不同方面阐述实现电子设备的"三防"性能的方法和措施.     

考虑微加工误差的微机械陀螺的健壮性优化

 为减小微加工误差对音叉振动式微机械陀螺设计性能的影响、提高其批量性能稳定性,以对其加工后性能变异影响最大的若干关键参数为设计变量,在分析了几何约束条件、模态性能约束条件、基于模态的加工灵敏度约束条件的基础上建立了微机械陀螺健壮性优化的数学模型。在无需事先知道微机械陀螺尺寸／性能的详尽统计信息的条件下,采用一阶摄动技术和遗传算法实现了微机械陀螺的健壮性优化设计。     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

一种用于主动流动控制的气泡型微致动器

 面向先进主动流动控制,在国内率先研发了一种基于微机电系统(MEMS)的气泡型微致动器阵列技术。分析了气泡型微致动器用于主动流动控制的原理,阐述了致动器结构及其加工工艺。通过对气泡样件的压力载荷 变形行为的测试,表明其具有较好的线性和较大承载能力。结合不同翼型的风洞试验表明,微致动器作动可以影响翼型表面的压强分布,从而可用于增升等控制目的。     

Scientific objectives and payloads of Tianwen-1, China’s first Mars exploration mission

This paper describes the scientific objectives and payloads of Tianwen-1, China’s first exploration mission to Mars. An orbiter, carrying a lander and a rover, lifted-off in July 2020 for a journey to Mars where it should arrive in February 2021. A suite of 13 scientific payloads, for in-situ and remote sensing, autonomously commanded by integrated payload controllers and mounted on the orbiter and the rover will study the magnetosphere and ionosphere of Mars and the relation with the solar wind, the atmosphere, surface and subsurface of the planet, looking at the topography, composition and structure and in particular for subsurface ice. The mission will also investigate Mars climate history. It is expected that Tianwen-1 will contribute significantly to advance our scientific knowledge of Mars.     

某型飞机平尾管梁轴承轴向间隙问题的分析

分析某型飞机平尾管梁安装轴承轴向间隙产生的原因及轴承间隙加大对飞机使用的影响,并提出了排故和设计改进措施。     

产品研制和批产阶段可靠性问题分析

从产品研制和批产阶段暴露的与可靠性相关的故障入手,对目前产品在这两个阶段存在的一些问题进行了分析,并根据分析结果提出解决方法和改进建议.     

基于数据包络分析的民航发动机维修效果评价

对民航发动机维修效果进行评价可以为发动机承修厂的选择提供决策支持,同时有助于发现发动机承修厂的潜在问题。为了实现发动机维修效果的评价,首先提出了评价指标选择的原则,在此基础上给出了发动机维修效果评价指标体系,建立了基于数据包络分析的C2WH模型的发动机维修效果评价模型,并对模型的构建过程进行了描述。针对决策单元输入输出...     

幂等自映射的Nielsen数(4)

本文利用粘接等方法证明了一类拓朴空间上的幂等自映射的Ｎｉｅｌｓｅｎ数不超过１。