双层多目标规划若干问题的研究

研究了下层决策者无关联的双层多目标规划问题，在不同偏好意义下，给出了各自解的定义，讨论了线性双层多目标规划问题。     

线阵CCD平场校正及FPGA实现的研究

为了消除由于照明光源的非均匀性、镜头渐晕及CCD传感器噪声对图像质量造成的不良影响,首先从理论上分析了线阵CCD固定模式噪声和像素光电响应非均匀性的数学模型和产生的原因;对像素光电响应非均匀性这一主要影响因素,根据其光电响应模型提出了CCD像素光电响应非均匀性的两点校正方法,即求解出各个像素光电响应不均匀性的校正因子和暗偏置量系数,进而用以计算各个像素的校正量,实现逐点校正;针对校正算法大数据量、实时计算的要求,设计了基于现场可编程逻辑门阵列FPGA快速实现校正算法的硬件处理结构。最后,通过仿真和实验表明,两点校正方法可以有效地减小CCD像素光电响应不均匀性的图像噪声,提高图像质量,以便做后续精确处理。     

A comprehensive study of the 2016 Mw 6.0 Italy earthquake based on high-rate (10 Hz) GPS data

The 2016 M_w 6.0 Italy earthquake is successfully recorded by the near-field 10?Hz GPS and 200?Hz Strong Motion (SM) stations, providing valuable data for this study. A comprehensive study of this earthquake is carried out based on GPS data, which contains coseismic deformations analysis, noise analysis, seismic wave picking, and magnitude determination. The noise of most GPS-derived displacement waveforms can be described as a combination of white noise, flicker noise, and random walk noise after the earthquake occurrence, and the spectral indices vary significantly for most stations, implying that the seismic signals have affected the noise characteristic of GPS-derived displacement waveforms. S-transform is employed to assess the GPS capability to detect the seismic arrival time. The SM station AMT and the GPS station AMAT are in good agreement in seismic wave picking, and the difference is only 1.2?s in the north component, suggesting that the outcome of seismic wave picking using GPS data is reliable. Then, a classic empirical formula is employed to determine the moment magnitude. A robust moment magnitude (Mw 5.90) can be estimated by the nine GPS stations with about 23.9?s. If four GPS stations near the epicenter is chosen to determine the magnitude, it only take 13.0?s to retrieve a reliable preliminary (Mw 5.82) magnitude, which is 5.4?s ahead of nine stations. In addition, Cross Wavelet Transform (XWT) is adopted to measuring the correlation and phase relationship between GPS and SM records. The result of XWT analysis indicates 10?Hz GPS is capable of capturing reliable and accurate coseismic dynamic deformations, as evidenced by the XWT-based semblance being close to 1 between GPS and SM records. The above results confirm the capability of 10?Hz GPS to capture coseismic dynamic deformations, detect seismic arrival time, and determine earthquake magnitude. Moreover, rapid magnitude determination based on 10?Hz GPS data can be regarded as an important supplement to Earthquake Early Warning (EEW).     

厦门港口与产业集群互动发展研究

港口经济是厦门城市经济的重要组成部分,厦门港口与产业集群互动对于区域经济发展有着重要意义.文章分析了厦门主要港区、产业群及临港产业的发展现状,以灰色系统理论为基础从定量的角度分析了厦门港口与产业群互动发展关联状况.根据定性定量分析的结果,提出了促进厦门港口与产业集群互动发展的对策.     

Aircraft nonlinear stability analysis and multidimensional stability region estimation under icing conditions

Icing is one of the crucial factors that could pose great threat to flight safety,and thus research on stability and stability region of aircraft safety under icing conditions is significant for control and flight.Nonlinear dynamical equations and models of aerodynamic coefficients of an air craft are set up in this paper to study the stability and stability region of the aircraft under an icing condition.Firstly,the equilibrium points of the iced aircraft system are calculated and analyzed based on the theory of differential equation stability.Secondly,according to the correlation theory about equilibrium points and the stability region,this paper estimates the multidimensional stability region of the aircraft,based on which the stability regions before and after icing are compared.Finally,the results are confirmed by the time history analysis.The results can give a reference for stability analysis and envelope protection of the nonlinear system of an iced aircraft.     

阵风载荷减缓系统故障分析

阵风引起的额外载荷会引起飞机结构疲劳,降低结构使用寿命。采用非定常气动力有理函数拟合方法建立时域状态空间下的动力学系统,设计了阵风载荷减缓系统。研究了阵风载荷减缓系统3种典型故障模式(副翼偏转饱和、舵机卡死、副翼偏转延时)的力学建模方法,并对机翼在阵风减缓系统故障模式下的阵风响应进行分析。仿真结果表明,3种故障模式均不利于阵风载荷减缓系统对阵风载荷的减缓,对于一些特定情况,故障模式下的阵风载荷减缓系统不仅不能减缓阵风载荷,还会带来由副翼偏转不当引起的额外负载。     

EPDM包覆层热解状态下的力学行为及本构模型

为了准确描述固体火箭发动机三元乙丙(EPDM)包覆层在不同热解状态下的力学特性,通过热重分析的方法得到EPDM的热解温度范围,并采用准静态单轴拉伸实验的方法获得EPDM在不同热解温度下的应力-应变曲线。以Ogden(n=2)模型为基础,分别对不同热解状态下的力学曲线进行建模,并通过对实验数据的拟合获得模型参数。结果表明,在初始热解状态下,材料只发生了少量的失水和气体的逃逸,其力学行为可通过粘超弹本构模型进行描述;随着材料热解程度增加,基体材料和填充纤维均遭到破坏,其力学行为表现为超弹脆性材料特性。     

基于单平面双螺旋谐振单元新型左手传输线研究

对基于单平面双螺旋谐振单元的左手传输线进行了研究.对设计的单平面双螺旋单元结构的电磁特性进行仿真并与实际测量结果比较.用散射参数提取算法提取了该结构的折射率和相位常数,提取结果表明上述参数在特定频段同时为负,证明该结构具有左手特性.提出调整螺旋圈数控制传输线电磁特性的方法.通过仿真总结和检验了该参数的调整规律.     

刍议发展性高校课堂教学质量评估

课堂教学质量评估是教育评估的重要组成部分,是提高教学质量的关键.目前的高校课堂教学质量评估主要体现奖惩性,虽然起到了监督和管理的作用,但是却忽视了评估的发展性对教师个人职业发展的促进,以致难以形成持续性的发展动力.文章试图从发展性的角度探讨高校课堂教学质量评估存在的问题,并提出对策建议.