功率级无刷直流电动机四象限运行模拟器设计

针对无刷直流电动机（BLDCM）驱动控制器在研发过程中全工况测试困难、测试成本高和研发周期长的问题，提出了一种采用分区间采样和解算方法的、具有四象限运行能力的功率级（PHIL）无刷直流电动机模拟器，替代实物电动机和机械负载装置完成对两两导通控制方式下无刷直流电动机驱动控制器的各项性能测试与可靠性试验。该模拟器由实时仿真器、电动机模拟变换器和多级式双向变换器3部分组成，实时仿真器负责采集被测电动机驱动控制器输出的PWM电压，实时解算电动机模型得到三相电流指令，控制电动机模拟变换器生成三相电流，多级式双向变换器负责维持模拟器输入、输出间的能量平衡关系，从而实现对四象限运行时无刷直流电动机的功率级模拟。实验结果表明:所提出的功率级无刷直流电动机模拟器模拟精度高、实时性好、测试灵活，能够有效替代实物电动机和机械负载装置，满足电动机驱动控制器的测试需求。      

Inverse identification of constitutive parameters of Ti2AlNb intermetallic alloys based on cooperative particle swarm optimization

Ti₂AlNb intermetallic alloy is a relatively newly developed high-temperature-resistant structural material, which is expected to replace nickel-based super alloys for thermally and mechanically stressed components in aeronautic and automotive engines due to its excellent mechanical properties and high strength retention at elevated temperature. The aim of this work is to present a fast and reliable methodology of inverse identification of constitutive model parameters directly from cutting experiments. FE-machining simulations implemented with a modified Johnson-Cook (TANH) constitutive model are performed to establish the robust link between observables and constitutive parameters. A series of orthogonal cutting experiments with varied cutting parameters is carried out to allow an exact comparison to the 2D FE-simulations. A cooperative particle swarm optimization algorithm is developed and implemented into the Matlab programs to identify the enormous constitutive parameters. Results show that the simulation observables (i.e., cutting forces, chip morphologies, cutting temperature) implemented with the identified optimal material constants have high consistency with those obtained from experiments, which illustrates that the FE-machining models using the identified parameters obtained from the proposed methodology could be predicted in a close agreement to the experiments. Considering the wide range of the applied unknown parameters number, the proposed inverse methodology of identifying constitutive equations shows excellent prospect, and it can be used for other newly developed metal materials.     

高能(450 kV)X射线参考辐射场附加过滤研究

利用MCNP程序对450kV X光机建立模型，计算各参考辐射质下的原级谱、平均光子能量。对ISO 4037-1中已有范围的管电压与附加过滤片厚度关系曲线进行二次拟合，确定模拟厚度范围。利用MCNP计算各附加过滤组合下的平均光子能量值，并与外推法得出的平均光子能量值进行对比，将相对偏差最小时的附加过滤作为最终确定值。从部分能量点的模拟与测量结果的对比可看出，模拟得出的平均光子能量在2%以内与PTB及中国计量院测量结果保持一致，附加过滤最大相对偏差为18%。     

基于DDPG算法的无人机集群追击任务

无人机的集群化应用技术是近年来的研究热点，随着无人机自主智能的不断提高，无人机集群技术必将成为未来无人机发展的主要趋势之一。针对无人机集群协同执行对敌方来袭目标的追击任务，构建了典型的任务场景，基于深度确定性策略梯度网络（DDPG）算法，设计了一种引导型回报函数有效解决了深度强化学习在长周期任务下的稀疏回报问题，通过引入基于滑动平均值的软更新策略减少了DDPG算法中Eval网络和Target网络在训练过程中的参数震荡，提高了算法的训练效率。仿真结果表明，训练完成后的无人机集群能够较好地执行对敌方来袭目标的追击任务，任务成功率达到95%。可以说无人机集群技术作为一种全新概念的作战模式在军事领域具有潜在的应用价值，人工智能算法在无人机集群的自主决策智能化发展方向上具有一定的应用前景。     

虚拟多触角探测的高超声速滑翔飞行器再入机动制导

针对高超声速滑翔飞行器再入过程中面对的多约束问题，提出一种基于虚拟多触角探测的路航点规划机动制导策略。该机动制导策略通过飞行器最大转弯轨迹计算速度-剩余地面距离-航向角约束，在分段定点模式中发出多条粗略预测触角，引用触角末端反馈的信息计算优先级以确定临时路航点；同时在机动制导模式中发出精细探测触角，计算触角末端信息优先级，经倾侧角延时滤波器得出控制指令，对飞行器进行机动制导。基于多触角探测的路航点规划机动制导策略，降低了三触角机动制导方法中的计算时间；同时，4种典型禁飞区条件下的仿真结果表明，该策略能够有效稳定地解决机动制导过程中的多约束问题。     

高温声表面波器件Pt电极的制备研究*

针对高温声表面波(SAW)器件中的Pt电极制备需求,采用电感耦合等离子体干法刻蚀工艺实现Pt电极的干法刻蚀。通过采用纯Ar气源,研究不同ICP功率/RF功率下Pt电极的刻蚀,采用优化的刻蚀参数实现SAW中Pt叉指电极的制备。针对Pt溅射刻蚀中出现的再沉积问题,分析沉积物对电极制备的影响,通过后处理实现沉积物的去除,实现高温SAW器件的制备。     

微阴极真空电弧点火起弧及加速机理研究综述

微阴极真空电弧推力器具有结构简单、重量轻、功耗低、比冲高等优点，因而在航天推进领域有着广阔应用前景.当前推力器设计研制、可靠性和寿命的提高等方面遇到的一些关键问题均与微阴极真空电弧放电过程的基本物理问题密切相关.对微阴极电弧推力器运行中涉及的电子发射、电极间起弧过程、阴极斑点形成及特点、烧蚀和形貌变化、电极间等离子体射流加速过程进行了梳理，相关认识可以为今后进一步开展微阴极电弧推力器的设计优化、性能提高奠定基础.     

Characterization of ionospheric amplitude scintillations using wavelet entropy detrended GNSS data

The extensive monitoring networks of Global Navigation Satellite System (GNSS) ionospheric scintillation have been established to continuously log observation data. Further, the amplitude scintillation index and the phase scintillation index, which are derived from scintillation observations, are anticipated to accommodate the accuracy requirement of both the user level and the monitoring station level. However, raw scintillation observations essentially measure superposed waveform impairments of GNSS signals propagating through ionosphere and troposphere. It implies that fluctuations of raw scintillation observations are caused by multiple factors from the entire radio propagation environment. Hence, it is crucial to characterize ionospheric scintillations from GNSS observation data. And the characterization is implemented through extracting fluctuations of raw observations merely induced by ionospheric scintillations. Designed to address this problem by means of Fourier filtering detrending, the present work investigates the influence of varying detrending cutoff frequencies on wavelet statistical energy and wavelet entropy distributions of scintillation data. It consequently derives criteria on the optimum detrending cutoff frequency for three types of raw amplitude scintillation data, which are classified by their wavelet energy distributions. Results of the present work verify that detrending with specific optimum cutoff frequencies rather than the fixed and universally applicable one renders the validity and credibility of characterizing ionospheric scintillations as the part of GNSS observation fluctuations purely induced by ionosphere electron density irregularities whose scale sizes are comparable with or smaller than the Fresnel scale.     

遍历理论在航天动力学领域的应用

系统地研究遍历理论在航天动力学领域的应用，包括椭圆轨道长期覆盖和受晒因子等长期参数的平均化计算.从无摄和J2项摄动下平均轨道根数的长期和长周期项出发，构造非共振条件下覆盖和受晒因子的测度描述，并证明该测度的不变性；给出相关相空间和相流定义，并证明该相流的保测度性；应用Birkhoff Khinchin定理将长期覆盖和受晒因子等无限时间的累积问题成功转换为有限空间的二重积分运算.研究结果表明，遍历理论是解决航天动力学领域长期参数统计计算的有力工具.