钛合金胶接点焊接头的性能检测

研究了不同焊接电流下钛合金板胶接点焊接头的A扫描信号和C扫描图像特征,并进行了拉伸-剪切试验。结果表明:通过观察C扫描图像的特征与A扫描信号的变化,能够划分胶接点焊接头的胶层区、热影响区、熔合区、熔核区以及焊接缺陷;随着电流(7~10 k A)的逐渐增大,接头熔核直径呈递增趋势,相应的失效载荷从7 231.5增加到10 939.0 N;当电流为7 k A时,在C扫描图像上反映出飞溅缺陷,此时接头失效载荷远小于没有出现飞溅的接头,可见飞溅降低了胶接点焊接头的拉剪载荷。     

旅游者出游激励理论探讨

从期望理论的视角审视旅游者的决策过程,主要借鉴维克托.弗鲁姆(Victor H. Vroom)期望理论的相关原理,初步搭建了旅游者出游激励理论的基本框架,解决了旅游者决策依据问题。通过旅游感知效价、旅游感知成本等全新概念的引入和一系列调查问卷的设计,最终得出了出游激励力的完整表达式并有以下阶段性结论:(1)信息准备是旅游感知效价、旅游期望值2、旅游感知成本的直接来源;(2)旅游感知效价、旅游期望值2、旅游感知成本对旅游者做出决策至关重要;(3)出游激励力是旅游者最终做出决策的惟一依据。     

复杂电磁环境下无线接收机电磁兼容快速测试技术应用CSCD

复杂射频电磁环境下,无线接收机作为主要的敏感设备,其电磁兼容性直接影响着整个武器装备的电磁兼容特性. 本文针对GJB 151B中对于接收机非线性测试方法的局限性,引入了一种利用自动双频测试系统对接收机干扰响应的快速测试方法;并搭建了实验室半实物仿真测试平台,检测了某接收机在（ 4-6 ） GHz组合频率干扰下的所有非线性的干扰响应通道. 测试结果对于评估接收机及其所在系统的外部电磁环境适应性具有重要参考价值.     

A new dynamic pushback control method for reducing fuel-burn costs: Using predicted taxi-out time

Long departure-taxi-out time leads to significant airport surface congestion, fuel-burn costs, and excessive emissions of greenhouse gases. To reduce these undesirable effects, a Predicted taxi-out time-based Dynamic Pushback Control(PDPC) method is proposed. The implementation of this method requires two steps: first, the taxi-out times for aircraft are predicted by the leastsquares support-vector regression approach of which the parameters are optimized by an introduced improved Firefly algorithm. Then, a dynamic pushback control model equipped with a linear gate-hold penalty function is built, along with a proposed iterative taxiway queue-threshold optimization algorithm for solving the model. A case study with data obtained from Beijing International airport(PEK) is presented. The taxi-out time prediction model achieves predictive accuracy within 3 min and 5 min by 84.71% and 95.66%, respectively. The results of the proposed pushback method show that total operation cost and fuel-burn cost achieve a 14.0% and 21.1%reduction, respectively, as compared to the traditional K-control policy.(3) From the perspective of implementation, using PDPC policy can significantly reduce the queue length in taxiway and taxi-out time. The total operation cost and fuel-burn cost can be curtailed by 37.2% and 52.1%,respectively, as compared to the non-enforcement of any pushback control mechanism. These results show that the proposed pushback control model can reduce fuel-burn costs and airport surface congestion effectively.     

飞机地面除冰运行合作博弈模型研究

通过对飞机除冰运行问题的分析研究,以合作博弈的思想为理论基础,建立了在允许合作选择对策并且进行支付转移规则下的航空公司博弈模型,通过对模型核心与特征函数的分析,基于Shapley向量的博弈核心求解方法得以提出。仿真结果表明,该合作博弈模型有效激励了航空公司间的合作行为,基于Shapley向量核心解法兼顾了联盟的集体理性与个体理性,对比显示,其分配方案合理、较优。     

存在干扰下的无人机中继站波束成形算法

无人机(UAV)通信具有部署快、使用灵活、通信质量好等优点,在无线通信领域具有广阔的应用前景。采用UAV作为中继站构成的增强型卫星通信网络经常受到各种干扰的影响,导致其性能急剧下降。以信干噪比(SINR)最大化为准则,UAV中继站发射功率满足要求为约束条件的优化问题的基础上,提出了一种基于最大瑞利熵的波束成形(BF)算法,得出最优权矢量。为了降低BF算法的实现复杂度,进一步提出了一种基于迫零(ZF)的次优BF算法。计算机仿真验证了这2种BF算法的有效性。     

表面组装生产线的最优配置

在电子产品高速发展的时代,表面组装行业显得尤为重要,表面组装生产线的配置情况与产品的生产效率息息相关。在对表面组装生产线进行配置时需要考虑到诸多因素,包括设备的类型、组线方式及采用的工作方式等。要想实现高效生产就必须对这些因素进行系统的优化配置。     

ENERGY-SAVING MATCHING STRATEGY AND EXPERIMENTAL STUDY OF PUMPING SYSTEM FOR TRUCK-MOUNTED CONCRETE PUMP

Aiming at the high fuel consumption and use-cost of truck-mounted concrete pump , an energy-saving matching strategy of pumping system is presented and the experimental study is conducted.Since pumping system occupies most resources of engine , the matching strategy between engine and main pump is analyzed to meet the load demand and reduce the engine rational speed drop.The testing method is established to measure the fuel consumption of engine under various working conditions , and the experimental data are analyzed to find the law of the fuel consumption of engine.The system performance can be improved by adjusting the system input value.Finally , the energy-saving matching strategy is established to reduce the fuel consumption of truck for unit workload , which provides a new approach for the energy-saving of truck-mounted concrete pump.     

基于有限元仿真的指尖密封准动态性能分析方法

指尖密封性能的量化表达和计算效率一直是设计人员关心的问题。针对指尖密封的工作特点,对其泄漏机理和磨损特性进行了分析。基于有限元分析构建了指尖密封性能量化表达的准动态性能模型,解决了理论设计中磨损和泄漏特性难以计算和计算工作量较大的问题。采用该方法的研究结果表明环境温度升高到300℃时,泄漏率较之27oC条件下降低了65%,磨损率升高了约4%;指尖片厚度从0.1mm增加到0.5mm时,泄漏率降低了70%,磨损率升高了28%;同时指尖曲梁个数、转子转速和压差对指尖密封性能同样具有重要影响。分析初步表明,提出的计算方法能够较好地反映指尖密封实际动态特性,为指尖密封性能设计提供了快捷高效计算方法。