电离层顶部电子含量对GNSS电离层层析的影响分析

卫星信号射线上的总电子含量(slant total electron content, STEC)是像素基全球卫星导航系统电离层层析(computerized ionospheric tomography, CIT)建模的必要数据来源，但电离层层析通常忽略1 000 km以上的顶部电子含量，为弄清这部分电子含量对层析结果的影响，利用NeQuick2模型计算站星视线上的STEC与其在电离层区域内的STEC比值来改正原始数据，并分别利用改正前后的STEC进行电离层层析。结果显示，电离层顶部电子含量占比约为10%，白天占比略大于黑夜，与测高仪站的数据相比，改正后的均方根值比改正前提高了20%以上；与Swarm卫星提供的电子剖面数据对比，改正后的层析结果精度较改正前提升了19.6%左右，且该方法受地磁扰动影响较为明显。总的来说，利用CIT进行小尺度电离层探测，可较直观地看出，顶部电子含量对层析结果的影响较大，需要采取相应手段予以剔除。     

用于监控和数据采集的微小卫星星座系统设想

利用微小卫星星座代替陆基方式,完成监控和数据采集(SCADA)系统进行数据采集传输任务的方案由数据采集与传输分系统、远程用户分系统和综合管理中心分系统组成,可以对各类SCADA终端设备状态数据进行实时采集与传输,从而满足覆盖区域广阔、地理环境复杂的大型工程需要。分析表明,该方案具有全球覆盖、部署便捷等优势,仅须利用36颗微小卫星,就可以实现对南北纬60°区域的全时覆盖,适合在我国和国外应用。     

基于偏最小二乘回归分析的装备研制费用估算方法及应用

介绍了寿命周期费用的概念以及各阶段分布情况;针对经典回归分析的不足,采用偏最小二乘回归分析对某装备样本数据进行分析建模;建立了研制费用与几个相关指标的回归方程,并将估算结果与经典的回归分析进行对比,验证模型的合理性。该模型能较好地反映了费用与各指标之间的关系,对后续寿命周期费用的分析与控制有一定的意义。     

Radar target novel characteristic detection method

In this paper, a method of radar target detection based on 2-dimensional (2D) fractal dimension is proposed. The proposed approach exploits both range information and azimuth information to estimate fractal dimension. Moreover, the approach can increase the number of the data points. The above two merits result in the fractal dimension estimated by this method is more accurate and robust than the previous method. The detection performance is also better than the previous one, which only makes use of 1-dimensional (1-D) information to estimate fractal dimension. Theoretical analysis and experimental result show that the proposed method performs well in strong clutter background. The proposed method is also validated by real-life radar data, and the better result has been achieved.     

Orbit determination of BDS-3 satellite based on regional ground tracking station and inter-satellite link observations

The BeiDou global navigation satellite system (BDS-3) has established the Ka-band inter-satellite link (ISL) to realize a two-way ranging function between satellites, which provides a new observation technology for the orbit determination of BDS-3 satellites. Therefore, this study presents a BDS satellite orbit determination model based on ground tracking station (GTS) observations and ISL ranging observations firstly to analyze the impact of the ISL ranging observations on the orbit determination of BDS-3 satellites. Subsequently, considering the data fusion processing, the variance component estimation (VCE) algorithm is applied to the parameter estimation process of the satellite orbit determination. Finally, using the measured data from China’s regional GTS observations and BDS-3 ISL ranging observations, the effects of ISL ranging observations on the orbit determination accuracy of BDS-3 satellites are analyzed. Moreover, the impact of the VCE algorithm on the fusion data processing is evaluated from the aspects of orbit determination accuracy, Ka-band hardware delay parameter stability, and ISL ranging observation residuals. The results show that for China’s regional GTSs, the addition of BDS-3 ISL ranging observations can significantly improve the orbit determination accuracy of BDS-3 satellites. The observed orbit determination accuracy of satellite radial component is improved from 48 cm to 4.1 cm. In addition, when the initial weight ratio between GTS observations and ISL ranging observations is not appropriate, the various indicators which include orbit determination accuracy, ISL hardware delay, and ISL observation residuals were observed to have improved after the adjustment of the VCE algorithm. These results validate the effectiveness of the VCE algorithm for the fusion data processing of the GTS observations and ISL ranging observations.     

倾斜式周向槽机匣处理对压气机稳定性的影响

为分析倾斜周向槽机匣处理对跨声速轴流压气机NASA Rotor 37稳定性的影响,采用数值仿真方法研究了光壁机匣和倾斜周向槽机匣的扩稳效果。结果表明：经过周向槽机匣处理后,叶尖泄漏流被诱导进入周向槽,抑制了低速区的发展且泄漏流经过周向槽流出后能够吹除低能区,改善低速区造成的流道堵塞情况,扩大压气机的稳定工作范围;在设计转速下,5种不同形式的周向槽机匣处理都能够提高压气机的稳定裕度,其中,CT3的扩稳效果最好,稳定裕度提高2.86%,而峰值效率降低最少,仅降低0.7%;通过正交试验优化设计方法发现,样本9对于提升转子的稳定裕度效果最为明显,能够将稳定裕度提升2.95%,但会使峰值效率降低1.56%;当周向槽轴向倾斜方式不同时,会使得周向槽的周向截面及槽内流动发生改变,从而对压气机的稳定裕度和峰值效率造成影响。     

Study on Satellite-to-ground Laser Communications with Existence of Atmosphere

The laser beam used to establish a communication channel between satellite and ground segments has a small divergence angle and a tiny spot on the Earth’s surface, which may lead to the fail of the system. So it’s important to study the deflection of laser beam by the Earth’s atmosphere and find a way to calibrate this error. Both theoretical analysis and real data processing method are used to obtain the mathematical model for divergence angle of laser communication beam and its correction function. Then the model has been applied to the data, which was used to describe the atmosphere state by traditional ground segments to obtain the critical elevation angle. According to the results of calculation, our conclusion will be that the correction should be done when the critical elevation happens.      

脉冲多卜勒引信实时校准技术初步研究

脉冲多卜勒引信实时校准技术主要对引信回波模拟源的无线电引信技术指标进行准确评定,以达到校准的目的。目前对该类专用测试设备的校准仍停留在分项校准的状态,无法全面地对整个专用测试设备进行评定,本文利用"宽带数字接收+软件无线电"技术和解调算法,实现对引信回波模拟源的系统级校准的目的。     

一种新型陀螺的力矩器非圆性误差补偿方法

为提高磁悬浮控制敏感陀螺（MSCSG）对陀螺载体姿态的敏感精度,基于其洛伦兹力磁轴承（LFMB）的设计结构,提出了一种力矩器非圆性误差补偿方法。首先,针对一种新型双球形包络面转子MSCSG,介绍了MSCSG的结构特点与陀螺载体姿态角速度敏感原理,并分别建立了MSCSG力矩器半径误差模型、转子偏转干扰力矩模型与陀螺载体姿态角速度敏感误差模型。其次,通过实验测量了力矩器的圆度,通过MATLAB进行数据拟合得到了力矩器的非圆特性,采用勒让德多项式级数对力矩器非圆性进行了描述,并有效补偿了因力矩器非圆性误差导致的姿态角速度敏感误差。最后,对误差补偿效果进行了仿真验证,结果表明该补偿方法使陀螺载体姿态角速度敏感误差降低了83.5%。此外,本文方法还可以解决LFMB陀螺的相关共性问题。