Response of Hainan GPS ionospheric scintillations to the different strong magnetic storm conditions

Using the GPS ionospheric scintillation data at Hainan station (19.5°N, 109.1°E) in the eastern Asia equatorial regions and relevant ionospheric and geomagnetic data from July 2003 to June 2005, we investigate the response of L-band ionospheric scintillation activity over this region to different strong magnetic storm conditions (Dst < −100 nT) during the descending phase of the solar cycle. These strong storms and corresponding scintillations mainly took place in winter and summer seasons. When the main phase developed rapidly and reached the maximum near 20–21 LT (LT = UT + 8) after sunset, scintillations might occur in the following recovery phase. When the main phase maximum occurred shortly after midnight near 01–02 LT, following the strong scintillations in the pre-midnight main phase, scintillations might also occur in the post-midnight recovery phase. When the main phase maximum took place after 03 LT to the early morning hours no any scintillation could be observed in the latter of the night. Moreover, when the main phase maximum occurred during the daytime hours, scintillations could also hardly be observed in the following nighttime recovery phase, which might last until the end of recovery phase. Occasionally, scintillations also took place in the initial phase of the storm. During those scintillations associated with the nighttime magnetic storms, the height of F layer base (h’F) was evidently increased. However, the increase of F layer base height does not always cause the occurrence of scintillations, which indicates the complex interaction of various disturbance processes in ionosphere and thermosphere systems during the storms.     

旋转对曲率表面气膜冷却效率影响的数值研究

通过对旋转状态下曲率通道的气膜冷却现象的流动和换热进行数值模拟,得到了不同旋转数下凸表面和凹表面的冷却效率分布。计算选用剪切应力输运(SST)湍流模型,主流雷诺数ReD=4 797,吹风比M=0.4,旋转数Rt=0~0.023 9。研究结果表明,旋转数对冷却效率的影响明显：旋转数的增大使得气膜的轨迹偏转越明显,并且凸表面上气膜轨迹的偏转程度高于凹表面的。凸表面的冷却效率随着旋转数的增加而逐渐减小,而凹表面的冷却效率随着旋转数的增加而递增,并且旋转数的增加会弱化凸表面和凹表面上冷却效率的差别。     

多曲面岛屿五轴螺旋刀位轨迹规划

针对复杂拓扑关系的多曲面岛屿加工,以叶片阻尼台为研究对象,提出基于清根刀心轨迹的五轴球头刀螺旋刀位轨迹生成算法。首先建立局部坐标系,定义并确定中轴线,然后按层逐点创建投影射线,利用实体求交构造初始刀心螺旋轨迹;通过变步长迭代算法修正,使得刀心点距实体最短距离在加工精度范围内等于刀具半径。最后根据实体结构控制刀轴矢量,规划出无干涉的螺旋刀位轨迹。算例表明,本文算法统一了阻尼台加工与清根加工,避免了复杂偏置曲面片的构造,保证在加工过程中没有冗余进退刀的同时刀具不会过切叶身曲面,实现了阻尼台多曲面岛屿五轴球头刀高效精密加工。     

电动静液作动器非线性框图建模与鲁棒控制方法

 阐述了机载电动静液作动器（EHA）的典型工作原理与结构特点,根据其元部件数学方程,建立非线性精确框图模型,完善了EHA补油回路和摩擦特性的描述。通过对系统阻尼、稳态误差及摩擦的仿真分析,设计了一种结合动态压力反馈与变增益控制策略的状态反馈控制器,改善了系统动、静态性能。鲁棒性测试结果反映了系统参数不确定性对性能的影响。     

超高强度钢30CrMnSiNi2A的氢脆敏感性试验

采用延迟破坏、测氢含量、扫描电镜分析及冲击拉伸试验等方法,研究了超高强度钢30CrMnSiNi2A的氢脆敏感性。试验结果表明,30CrMnSiNi2A钢在甲醇或丙酮裂解气氛中保护加热油淬有明显氢脆现象,但只要及时回火,氢脆基本消除,性能达到合格。试验结果为生产提供了实验依据。     

某涡轴发动机整机逼喘试验研究

根据某型涡轴发动机研制的需要,在整机试验台进行了逼喘试验方法的探索,本文详述了发动机逼喘、试验方法设计、试验装置及试验过程,最后对试验结果进行了分析,研究结果表明利用该发动机上的飞机引气口接入高压气源的方法能够成功地进行该型发动机的整机逼喘试验,从而能够真实获得压气机装在整机上工作时的喘振边界线.      

金属粉末熔化快速成型技术的研究进展

SLM技术代表了快速制造领域的发展方向,运用该技术能直接成型复杂结构、高尺寸精度、高表面质量的致密金属零件,减少制造金属零件的工艺过程,为产品的设计、生产提供更加快捷的途径,进而加快产品的市场响应速度,更新产品的设计理念和生产周期.SLM技术在未来将会得到更好、更快的发展.     

氧化物涂层对航天器材料原子氧剥蚀的防护

采用磁控溅射方法在航天器常用材料聚酰亚胺(Kapton)表面沉积无机氧化物涂层(TiO₂和SiO₂),来提高材料的抗原子氧剥蚀性能.通过选择试验材料和参数,优化了沉积涂层的工艺,以克服容易产生裂纹的缺点.对材料进行了原子氧效应地面模拟试验,结果表明,在Kapton上沉积涂层后,质量损失下降了2个数量级.另外,有涂层的Kapton表面基本没有变化并且没有出现裂纹.其中,TiO₂由于热膨胀系数更接近Kapton,比SiO₂的防护效果更好.     

Geostationary orbit determination using SATRE

A new strategy of precise orbit determination (POD) for GEO (Geostationary Earth Orbit) satellite using SATRE (SAtellite Time and Ranging Equipment) is presented. Two observation modes are proposed and different channels of the same instruments are used to construct different observation modes, one mode receiving time signals from their own station and the other mode receiving time signals from each other for two stations called pairs of combined observations. Using data from such a tracking network in China, the results for both modes are compared. The precise orbit determination for the Sino-1 satellite using the data from 6 June 2005 to 13 June 2005 has been carried out in this work. The RMS (Root-Mean-Square) of observing residuals for 3-day solutions with the former mode is better than 9.1 cm. The RMS of observing residuals for 3-day solutions with the latter mode is better than 4.8 cm, much better than the former mode. Orbital overlapping (3-day orbit solution with 1-day orbit overlap) tests show that the RMS of the orbit difference for the former mode is 0.16 m in the radial direction, 0.53 m in the along-track direction, 0.97 m in the cross-track direction and 1.12 m in the 3-dimension position and the RMS of the orbit difference for the latter mode is 0.36 m in the radial direction, 0.89 m in the along-track direction, 1.18 m in the cross-track direction and 1.52 m in the 3-dimension position, almost the same as the former mode. All the experiments indicate that a meter-level accuracy of orbit determination for geostationary satellite is achievable.     

视频压缩技术发展动向分析

该文从静止图像编码、视像会议系统、ＭＰＥＧ和Ｖｉｄｅｏ ＣＤ、电话的视频信号、第二代视频编码技术、视频彩色空间和分辨率等６个方面介绍了视频压缩技术的最新发展，并对未来的ＭＰＥＧ４进行了分析。