民机的一种新型布局形式——翼身融合体飞机

 讨论了一种区别于机翼与圆柱机身的传统民机外形——翼身融合体（BWB）外形。从给定容积下减少浸润面积和摩擦阻力的考虑发展出了翼身融合体的概念。在满足系列设计约束条件下讨论了适于大型（800座）客机的翼身融合体的技术和商业上的可能性。概念设计研究表明,翼身融合体外形可获得比常规外形更好的性能。巡航升阻比可从传统外形的19提高至23。480座的BWB外形与同量级的传统外形（A380-700）相比,最大起飞重量可减少18%,每座位燃油消耗可减少32%,具有良好的环保性。通过气动载荷分布规律的反设计,翼型修型和三维优化设计等气动设计方法可以有效减阻和提高BWB的气动性能。由于BWB的高度融合性,讨论了多学科优化设计方法的重要性和有效性。BWB概念能够发展成BWB系列机,进一步提高巡航马赫数也是可能的。     

数控加工钨渗铜材料工件的工艺参数选用

针对钨渗铜材料切削性能差,在数控切削加工过程中易产生裂纹、崩料、变形等质量缺陷,从刀具、切削参数、切削液选用及走刀路线的安排等方面综合考虑,提出了解决问题的工艺方法。     

Effect of sodium tartrate concentrations on morphology and characteristics of anodic oxide film on titanium alloy Ti–10V–2Fe–3Al

The effect of sodium tartrate concentrations on morphology and characteristics of ano-dic oxide film on titanium alloy was investigated. The alloy substrates were anodized in different concentration solutions of sodium tartrate with the addition of PTFE emulsion and their morphol-ogy and characteristics were analyzed. The anodic oxide film presented a uniform petaloid drums and micro-cracks morphology. Additionally, micro-cracks dramatically swelled with the increase of the tartrate concentrations. The thickness of the anodic oxide film increased with the concentra-tions until the concentration reached 15 g/L. The results of Raman analysis illustrate that all sam-ples have similarity in the crystal structure, consisting of mainly amorphous TiO2, some anatase TiO2 and a small amount of rutile TiO2. And the ratios of anatase TiO2 and rutile TiO2 increase with the concentrations until it reaches 15 g/L. Furthermore, the intensity of the peaks increases with enhanced concentrations until the concentration reaches 15 g/L. The corrosion resistance of the anodic oxide film is increased by the sodium tartrate with higher concentrations before 15 g/L. The coefficient of friction of the anodic oxide film reduces with the concentrations until the concentration reaches 15 g/L, then the coefficient of friction of the anodic oxide film increases with the concentrations.     

冲击射流的彩虹纹影实验研究

超声速冲击射流在短距、垂直起降飞行器（S/VTOL）以及火箭发射等方面应用广泛,但是伴随着流场与噪声等诸多方面的问题。要研究这一类问题,必先研究这一类超声速流动的波系结构。文章利用彩虹纹影测量系统,对不同距离不同压比的冲击射流进行实验研究,得到了清晰的彩虹纹影实验结果,细致地呈现了冲击射流的波系结构。基于实验结果,对三种不同结构的冲击射流的波系结构进行了详细分析。发现喷嘴与挡板距离较大时,形成的射流结构与自由射流相似,壁面附近的射流区域不明显。随着距离减小,冲击射流出现壁面冲击区附近射流比较剧烈的现象。距离进一步减小时,出现滞止泡等结构,滞止泡的形状与压比相关。此外,实验表明冲击射流形成的马赫盘大小、形状与来流压比相关。     

Identification method for helicopter flight dynamics modeling with rotor degrees of freedom

A comprehensive method based on system identification theory for helicopter flight dynamics modeling with rotor degrees of freedom is developed. A fully parameterized rotor flapping equation for identification purpose is derived without using any theoretical model, so the confidence of the identified model is increased, and then the 6 degrees of freedom rigid body model is extended to 9 degrees of freedom high-order model. Bode sensitivity function is derived to increase the accuracy of frequency spectra calculation which influences the accuracy of model parameter identification. Then a frequency domain identification algorithm is established. Acceleration technique is developed furthermore to increase calculation efficiency, and the total identification time is reduced by more than 50% using this technique. A comprehensive two-step method is established for helicopter high-order flight dynamics model identification which increases the numerical stability of model identification compared with single step algorithm. Application of the developed method to identify the flight dynamics model of BO 105 helicopter based on flight test data is implemented. A comparative study between the high-order model and rigid body model is performed at last. The results show that the developed method can be used for helicopter high-order flight dynamics model identification with high accuracy as well as efficiency, and the advantage of identified high-order model is very obvious compared with low-order model.     

煤油/氧气预爆器爆震波特性研究

为了解决液态煤油旋转爆震发动机短距离快速起爆问题,进行了煤油/氧气预爆器方案设计。此方案包括双级轴向旋流和离心喷嘴匹配方案、半圆轴向垂直预爆管和圆管切向预爆管等设计,建立了液态煤油/氧气预爆器爆震波特性试验台。探讨了不同工作时序、当量油气比、预爆管结构等对预爆器爆震燃烧特性的影响。结果表明预爆器产生的爆震波压力达到4.0MPa以上,爆震波传播速度高于1300m/s,液态煤油/氧气最佳当量油气比存在于0.6-0.73之间一点。对比半圆轴向垂直预爆管和圆管切向预爆管,圆管模型爆震波压力明显高于半圆管模型,而传播速度却低于半圆管模型,圆管模型整体存在着前导激波的生成,而半圆管模型却在生成的爆震波后方有明显的压力波动现象     

柴油机两级VNT混联系统整机效率优化

为提高柴油机的余热回收利用率,提出一种基于可变喷嘴环式涡轮VNT（variable nozzle turbine）技术的两级涡轮混联系统。该系统根据柴油机运行工况,通过控制阀门的开闭来实现混联系统中串联工作模式和并联工作模式的转换。以涡轮的有效直径为参数来表征涡轮的流通能力,利用GT-Power仿真平台研究了两种工作模式下增压涡轮和动力涡轮的流通能力对发动机功率、动力涡轮功率及涡轮增压器性能的影响规律;提出了增压涡轮、动力涡轮与发动机的匹配策略;以系统整机效率最优为目标,针对柴油机不同运行工况进行混联方式的优化控制。结果表明:针对柴油机的不同运行工况,通过两级VNT复合系统混联优化运行方案,能够有效回收柴油机废气能量,额定工况下系统整机效率提高5.1%。      

K型半刚性电缆接头的研制

介绍K型半刚性电缆接头的特点和主要技术指标,着重讨论K型半刚性电缆接头的设计和结构,给出了自行研制的K型接头经美国HP8510毫米波网络分析仪详细测试的结果。测试结果证明,在25.5～40GHz频带内返回损耗为-14.55～38.55dB,接近国外同类产品水平,为国内毫米波接头填补了一项空白,并为我国毫米波同轴系统的推广应用打下了初步基础。     

分布参数随机系统的条件滤波方法

针对分布参数随机系统在其控制输入,系统输出存在观测噪声情况下,提出了分布参数随机系统的条件滤波方法,使得在获得系统状态的最优估计的同时,可以得到关于不确知的控制输入的最优估值,该算法所具有的系统状态和控制输入的估计器结构上的相似性,为降低分布参数系统的滤波算法数值计算上的复杂性提供了一种解决途径,也使得该算法在工程实际中有较大的应用前景.