颗粒填充复合材料的应变统计特征与刚度模量

针对填充颗粒体积份数高、随机分布的复合材料,基于一种特定应变分解方式,利用有限元数值分析,研究了任意宏观变形条件下代表性体积单元内应变分布的统计规律,分别得到了颗粒与基体内应变的平均值、应变的涨落值与宏观应变之间的统计关系,并对颗粒填充复合材料的等效剪切模量和等效体积模量进行了预测。     

耐腐蚀性过滤器用多孔陶瓷材料的制备（I）多孔先驱体的合成及其陶瓷化

对泡沫状多孔聚碳硅烷（PCS）的合成反应条件进行了较为详细的研究，通过控制化学反应的温度、压力和反应时间制备出了熔点高达380℃、相对分子质量Mn〉3000、陶瓷产率达79％（质量分数），密度〈0．6g／cm^3的多孔聚合物。对不同反应条件下所制得的多孔PCS的性能进行了表征，并利用IR、TG等手段对泡沫状多孔PCS的热解机理进行了初步探讨。     

老化时间对涂层性能的影响

利用电化学阻抗谱(EIS)技术研究了含有锌铬黄防锈颜料的环氧酯漆涂层的耐蚀性能。研究发现,当老化时间为4周时,涂层的耐蚀性能最佳,时间过长或过短都使得涂层性能下降。并且EIS技术可以用来研究涂层的老化。     

运输机总体参数和性能统计分析

 按照飞机设计的基本原理,通过对现有运输机总体参数和性能数据的统计分析,寻找现代运输机各个总体性能和性能参数之间存在的定量关系,得到了 1 6个经验公式和一些参数取值范围,为运输机概念设计提供了一些可用的数据。     

生态环境材料——社会可持续发展的物质基础

 生态环境材料是近年来在先进材料研究中提出的一个新研究领域。简要介绍了生态环境材料概念的产生、发展及哲学基础,从材料环境协调性评价、材料和物质的再生循环、与生态系统相协调的材料与工程、环境工程材料、与材料科学相关的生态工程等几方面对生态环境材料研究的最新进展进行了评述。     

桅杆式瞄准具对直升机聚焦式隔振系统动态特性的影响研究

对直升机加装桅杆式瞄准具后 ,聚焦式隔振系统的特性进行了分析与试验研究。考虑旋转翼轴、桅杆支撑结构的弹性影响 ,提出了一个新的 5个自由度的桅杆 /隔振系统 /机身耦合模型。为了验证该模型并有利于桅杆式瞄准技术的进一步研究 ,加工了一套瞄准具假件及其支撑结构 ,并在直 -×型机上进行了频率和传递函数测试 ,计算结果与试验结果吻合。研究表明 ,加装 80 kg的瞄准具 (被隔振重量的 1 2 % ) ,聚焦式隔振系统的一阶频率下降了 3 9% ;结构弹性对隔振系统隔振效率有很大影响 ,即使是原型机也达到了 40 3 %。     

湍流型动态畸变下涡喷发动机稳定性分析

对湍流型动态畸变进气流场进行了分析和描述，给出了随机涡在压气机进口所产生的总压脉动的通用分布曲线，并统计地分析和预测了该总压脉动引起的最可能最大失速裕度损失。数值分析表明在考虑压气机对非定常流响应方面，最为关心的压气机最大失速裕度损失值是脉动压力的均方根值、功率谱密度、压气机进口转子弦长和转速的函数。     

Influence of pre-tension on ballistic impact performance of multi-layer Kevlar 49 woven fabrics for gas turbine engine containment systems

In this paper, ballistic impact tests on wrapped multi-layer Kevlar 49 woven fabric systems were carried out with a flat blade projectile to investigate the impact response during a fan blade out event. The influences of the number of Kevlar layers and pre-tension were discussed particularly. Test results were used to analyze failure modes and energy absorption characteristics of multi-ply Kevlar fabrics. Results show that there are two kinds of impact damage for fabrics: global deformation mainly involving stretching of yarns in the impact region and fabric wrinkle from both sides to the impact zone, and local damage characterized by yarn fracture, yarn pull-out, and yarn unraveling. The energy absorption capability of Kevlar 49 woven fabrics improves with the number of fabric layers. The energy absorbed by multi-layer fabrics increases slightly at the beginning and then decreases substantially with pre-tension. The work in this paper can provide guidance for designing light-weight multi-layer fabrics containment systems.     

Experimental study of a controlled variable double-baffle distortion generator engine test rig

In order to explore the total-pressure distortion test assessment method for a turbofan engine, a Controlled Variable Double-Baffle Distortion Generator(CVDBDG) with a horizontal symmetry moving form was developed, which can adjust the steady-state and time–variant distortion separately in real time. The inlet total-pressure distortion test was conducted on an afterburner turbofan engine. The distortion parameters of CVDBDG and the instability characteristics of the engine were measured. The experimental data were modeled and analyzed by using back propagation artificial neural networks, and the work envelope of CVDBDG was obtained. Based on the analysis of the data on the engine's instability, the properties of CVDBDG used for the stability assessment were preliminarily evaluated. The results show that CVDBDG can simulate both steady-state and time–variant distortions simultaneously in a range determined by three envelopes.Under the condition of symmetric double baffles, a critical depth of insertion exists, beyond which the symmetric baffles will generate an asymmetric flow field. In the case of double baffles, compared to a single baffle, the engine exhibited different instability characteristics. Based on CVDBDG, it is expected that more efficient engine stability and durability assessment methods can be developed.     

改进的Neumann-LU混合法在失谐整体叶盘随机分析中的应用

为了降低失谐整体叶盘的随机分析矩阵求逆的计算成本,提出一种基于Neumann级数和LU分解的改进Neumann-LU混合法。一方面,在非共振频率附近的大区域采用Neumann级数频域展开式以提高计算效率;另一方面,在共振频率附近小区域采用LU分解法以提高计算计算精度;根据Neumann级数展开项数来选定自适应阀值,实现两种矩阵求逆方法的自动转换而不用消耗额外的计算资源。选取具有失谐特征的整体叶盘为研究对象,分别运用改进的Neumann-LU混合法和单一LU分解法求解叶片在阶次激励下的频域响应,并从计算效率和计算精度方面进行比较。研究结果表明,在保证计算精度误差不大于0.1%的前提下,改进的Neumann-LU混合法可以提高失谐整体叶盘随机分析大约55%的计算效率。