航空航天制造机器人高精度作业装备与技术综述

新一代航空航天产品的研制与批产对制造精度与加工质量提出了更高的新要求。以机器人为核心的智能制造技术与装备是解决该难题的有效途径。然而,工业机器人较低的定位精度与弱刚性结构属性严重制约了其在航空航天部件高精度加工作业中的推广应用。本文在阐述国内外机器人装备在航空航天制造业的应用现状的基础上,重点介绍了机器人作业刚度强化策略与定位误差精确补偿方法的研究现状,并分析了现有高精度控制方法存在的问题及技术难点。最后探讨了机器人作业装备在航空航天制造领域的技术发展趋势,为面向航空航天产品的机器人高精度制造技术的研究提供参考与借鉴。     

基于NB-IoT技术和GA-BP神经网络的车位预测系统

围绕有效整合城市停车资源,提高现有车位存量利用率的需求,构建了一种基于NB-IoT技术的车位预测系统。该系统采用NB-IoT技术进行信息采集与传输实现车位信息的共享;考虑到车位状态信息实时变化的特性,用历史车位占用数据来建立车位预测模型,推测出未来短时内车位变化趋势。为了提高车位预测的精度,采用遗传算法(Genetic algorithm,GA)优化反向传播(Back propagtion,BP)神经网络建立GA-BP神经网络车位预测模型。以某地下停车场历史数据为例进行仿真实验,研究结果表明:车位预测模型预测值与实际值相近且趋势保持一致,能够有效准确的预测车位状态变化,具有较高的精度。     

限带白噪声随机过程的雨流幅值概率密度函数模型

对17种不同带宽系数的限带白噪声随机过程进行了雨流循环计数统计,提出了一个限带白噪声随机过程的雨流幅值概率密度函数(Probability density function,PDF)模型。该模型是Rayleigh分布和Weibull分布的线性组合,其中待定系数均为随机过程谱参数的函数。采用该模型对这17种随机过程的雨流幅值概率密度函数进行了公式拟合,探究了模型中待定参数与随机过程谱参数之间的关系,确定了模型表达式。对照随机过程的雨流计数统计结果,将该模型与Dirlik模型的预测精度进行了比较,结果表明该模型的预测效果优于Dirlik模型。     

基于信息驱动的保障技术研究

说明了基于信息驱动的维护保障体系的国内外现状及发展趋势,为我国军机的信息化保障工作的开展奠定了技术基础,具体研究内容包括：国内现役军机保障体系现状分析;国外军机保障信息化技术发展状况分析;信息驱动的保障体系特征分析与关键技术的研究。     

复材机身制造的自动化流水线工艺过程

AeroSuite给出了一个飞行器制造过程有效管理整个产品制造流程的解决方案。它包括FiberSIM复材工艺软件、SyncroFIT机身设计制造装配软件、对于首件鉴定过程的流程化的质量规划模块(QPE)。     

基于独立象元数计算的景象匹配精度分析方法

景象匹配精度与正确匹配概率是决定组合导航系统精度的重要指标。建立了新的求解图像独立象元数的方法,在进行景像匹配过程的同时由独立象元数、信噪比和相关函数统计值得到匹配精度及正确匹配概率。理论推导和仿真分析表明,本文的景象匹配精度分析方法合理,结果符合工程背景,文中的结论可以用于景象匹配辅助导航系统性能的精确分析。     

抗战语境下“赞助人”对翻译活动的操纵——以钱歌川的译介活动为例

1937至1945年抗战时期的抗战语境对我国的翻译实践产生了很大的影响。本文从赞助人的视角剖析Andre Lefevere的操纵论对抗战时期我国译介活动的影响和操纵,指出赞助人对翻译活动有其推动作用。也分析其对翻译过度操纵的局限性,以及翻译研究不应忽视对翻译本体的认知与把握。     

GARMIN G1000系统维修平台设计

在分析GARMIN G1000系统结构及其内部总线规范的基础上,设计出一套集测试、诊断、维修于一体的GARMIN G1000系统维修平台,包括系统硬件设计、软件设计等。硬件设计主要包括信号模拟机、系统选择面板、信号转换模块和主控计算机等设备的设计。软件设计包括功能软件、测试软件、公用软件及数据库和帮助文档的设计与实现。实践证明该平台具有强大的故障诊断功能和良好的可扩展性,可用于G1000系统的部件测试维修工作。     

PARAMETER ANALYSIS ON CIRCULATION CONTROLLED CIRCULAR CYLINDER FOR NOTARTM TAIL BOOM

Lift on circulation control （CC） circular cylinder is calculated via numerical simulations based on 2D real- izable k-e epsilon viscous model and compared with experimental data. The simulation result shows an acceptable agreement with tested data. With the proved grid and simulation method, series of simulations are conducted to study the effect of parameters on lift. Single slotted tail booms under different clown wash velocities are optimized with the principle of generating maximum total moment around the main rotor shaft with same total power con- sumption. The results show that larger jet flow velocity, or smaller blow angle, or larger diameter of the cross section can help generating larger lift while enhancing the attachment of both the jet flow and down wash flow. Multiple slotted tail boom is better because it increases lift with same total slot width, and can increase lift by in- creasing total slot width without causing separation, also it helps generating high steady lift at a big rank of slot at- tack angles. To mount a guide vane （GV） at the exit of the slot, or shape the upper slot wall like a smooth-GV, or design the slot with an edge fillet is not recommended because it reduces the velocity of both the jet flow and the upstream of the attached downwash flow. Compared with other shapes of the slots, arcs-profiled slot performs better because of larger jet flow velocity and smaller blow angle. In order to generate the largest moment with same total power consumed by the entire NOTARTM system, total width of the slots and slot attack angle should be optimized according to velocity of down wash flow.     

WAKE GEOMETRY CALCULATIONS FOR TILT-ROTOR USING VISCOUS VORTEX METHOD

A tilt-rotor unsteady flow analytical method has been developed based upon viscous vortex-particle meth- od. In this method, the vorticity field is divided into small assembled vortex particles. Vortex motion and diffusion are obtained by solving the velocity-vorticity-formed incompressible Navier-Stokes equations using a grid-free La- grangian simulation method. Generation of the newly vortex particles is calculated by using the Weissinger-L lifting surface model. Furthermore, in order to significantly improve computational efficiency, a fast multiple method （FMM） is introduced into the calculation of induced velocity and its gradient. Finally, the joint vertical experimen- tal （JVX） tilt-rotor is taken as numerical examples to analyze. The wake geometry and downwash are investigated for both hover and airplane modes. The proposed method for tilt-rotor flow analysis is verified by comparing its re- sults with those available measured data. Comparison indicates that the current method can accurately capture the complicated tilt-rotor wake variation and be suitable for aerodynamic interaction simulation in complex environ- ments. Additionally, the aerodynamic interactional characteristics of dual-rotor wake are discussed in different ro- tor distance. Results show that there are significant differences on interactional characteristics between hover mode and airplane mode.