一种紧固孔细节原始疲劳质量评定方法

 给出了一种由等幅载荷试验的断口金相数据反推得到的当量初始裂纹尺寸额定值（EIFSR）表征的紧固孔原始疲劳质量评定方法。并据此建立了原始疲劳质量符合性检查的EIF-SR判据和寿命判据。最后用上述判据对紧固孔细节进行了原始疲劳质量评定和符合性检查。     

低密度小喷管流场的DSMC直接模拟

用ＤＳＭＣ方法数值模拟了低密度轴对小喷管的流场流动，获得了相应的结果，并将所得结果与用差分求解Ｎ－Ｓ方程方法获得的结果进行了对比，二者吻合较好。     

铝/ZN-1阻尼材料复合结构件的粘接技术研究

探讨了胶黏剂黏度、硬铝表面处理方式及硅烷偶联剂KH-560的使用方式等因素对硬铝板/ZN-1阻尼材料复合结构件的粘接性能的影响。研究表明：如果硬铝板表面采用砂纸打磨处理时，采用黏度较低的TC-1环氧树脂胶或者在黏度较高的J-22环氧树脂胶中添加2％的硅烷偶联剂KH-560可以获得优异的粘接效果；当硬铝板表面采用铬酸阳极化处理时，两种胶黏剂均能获得优异的粘接效果。     

MAPO·HAc合成工艺规范化研究

MAPO·HAc是丁羟推进剂的一个关键组分,其性能重现性对推进剂力学性能的稳定有很大影响,所以,应将其合成工艺规范化.本文通过理论分析和实验研究,确定了分步合成的工艺路线.它是将MAPO与HAc的络合反应和开环酯化反应分步完成,避免了反应过程中的热量集中,反应易于控制,产品性能优良,重现性好.     

高科技与微型涡轮发动机的研制

在收集、分析国外某些微型涡轮发动机的文献和实物的基础上，结合参加自行设计微型涡轮发动机的体会，提出应用现有的和正在发展中的新技术、新材料、新工艺，将对微型涡轮发动机的性能和研制周期产生较大的影响。     

Effect of Counterface Material on Friction and Wear Behavior of Ni-Cr-W-Al-Ti-MoS_2 Composites

Ni-Cr-W-Al-Ti-MoS2 self-lubricating composites were prepared through the powder metallurgy (P/M) method. Their friction properties were investigated by a pin-on-disk tribometer in the range from the room temperature to 600 ℃. Alumina, silicon nitride and nickel-iron-sulfide alloys were selected as the counterface materials. Results indicate that the lowest friction coefficients under 0.22 can be obtained at 600 ℃ when rubbed against alumina. When rubbed against nickel-iron-sulfide alloys, are presented the lowest wear rates in the magnitude of 10-6 mm3/N·m, one order of magnitude lower than those when rubbed against ceramics. In the case of three rubbing pairs, the wear rates of the composite containing MoS2 present themselves inversely proportional to friction coefficients. With alumina ceramics used as a counterface, transfer films and glaze layers will form on the contact surface playing a main role in lubrication at high temperatures. However, when silicon nitride and nickel-iron-sulfide alloy are used, the lubricating transfer films appear not to be promi-nent.     

Robust space-time adaptive processing for airborne radar in nonhomogeneous clutter environments

Space-time adaptive processing (STAP) holds tremendous potential for the new generation airborne surveillance radar, in which the phased array antennas and pulse Doppler processing mode are adopted. A new STAP approach using the multiple-beam and multiple Doppler channels is presented here for airborne phased array radar. The approach with space-time multiple-beam (STMB) architecture is robust to array errors and has very low system degrees of freedom (DOFs). Hence, it has low sample support requirement and it is very suitable for the practical planar phased array radar under nonhomogeneous clutter environments. Meanwhile, a new nonhomogeneous detector (NHD) based on the correlation dimension (CD) is also proposed here, which is used as an effective method to screen tracing data prior to detection processing. It can further improve the performance of the STAP approach in the severely nonhomogeneous clutter environments. Therefore, a scheme that incorporates the correlation dimension nonhomogeneity detector (CD-NHD) with the STMB is recommended, which we term CD-NHD-STMB. The experimental simulation results indicate that: 1) the STMB processor is robust to array element error and has high performance under nonhomogeneous clutter environments; 2) the CD-NHD is also effective on the nonhomogeneous clutter. As a result, the CD-NHD-STMB scheme is robust to array element error and nonhomogeneous clutter, and therefore available for airborne phased array radar applications.     

建立民航维修专家系统的分析

简要介绍了专家系统的原理及构成.分析了“设计民航维修专家系统”的过程,目前加拿大正着手研制的“先进的维修软件系统”的概况.最后提出专家系统需要解决的关键技术问题及发展情况.     

离心式喷嘴工况理论分析

对离心式喷嘴的最大流量原理进行了证明，并求得了该原理成立的边界条件。分析了离心式喷嘴的工况，结果表明，当喷嘴压降等于或大于临界截面处平均余区的１．５倍时，其工况处于临界或超临界状态。导出了波沿离心式喷嘴中液体自由表面的传播速度及其频率的计算公式，从中可以看出，波的传播速度及其频率取决于喷嘴压降及喷嘴的几何特性。     

民用客机舒适性评估

本文给出了能用于说明民用客机旅客乘坐品质的数量关系,这些关系能用于预测旅客乘坐的舒适性。可供设计及使用单位参考。