基于二次调节原理的力矩负载模拟器中压力波动的补偿

 基于静液二次调节原理的力矩负载模拟器具有能够连续高速旋转和无多余力矩的特点。在恒压网络中,二次元件的力矩输出与其斜盘倾角成正比,即：如果系统压力出现波动,也将导致输出力矩的波动。导致系统压力变化的原因可能是油源压力脉动,但更主要是负载的变化。为了研究压力波动的影响及补偿,建立了基于静液二次调节原理的力矩负载模拟器,给出了仿真参数,并在此基础之上进行了仿真研究。为了提高力矩跟踪精度,提出利用斜盘倾角传感器和系统压力传感器来进行压力补偿,可有效地将系统压力波动对于力矩输出的影响抑制到20%左右。仿真和试验验证了此补偿方法的有效性。     

Analysis on Potential Conflict Frequency of Intersected Air Routes in Terminal Airspace Design

In order to obtain accurate conflict risks in terminal airspace design, the concept and calculation model of potential conflict frequency for intersected routes are proposed. Conflict frequency is represented by the product of horizontal conflict frequency and vertical conflict probability. The horizontal conflict frequency is derived from the probability density distribution of conflicts in a period of time. Based on the recorded radar trajectory data, the concept and model of ROUTE distance are proposed, and the probability density function of aircraft height at a specified ROUTE distance is deduced by kernel density estimation. Furthermore, vertical conflict probability and its horizontal distribution are achieved. Examples of three intersected arrival and departure route design schemes are studied. Compared with scheme 1, the conflict frequency values of the other two improved schemes decrease to 53 % and 24%, respectively. The results show that the model can quantify potential conflict frequency of intersec ted routes.     

Vision-based bio-inspired guidance law for small aerial vehicle

During predation, a flying insect can form a stealth flight path. This behavior is called motion camouflage. Based on the study results of this behavior, the perception and neurology of flying insects, a novel bio-inspired guidance law is proposed for the terminal guidance for small aerial vehicle with charge-coupled device imaging seekers. The kinematics relationship between a small aerial vehicle and target is analyzed, and a two-dimensional guidance law model is established by using artificial neural networks. To compare with the proportional guidance law, the numerical simulations are carried out in the vertical plane and in the horizontal plane respectively. The simulation results show that the ballistic of the small aerial vehicle is straighter and the normal acceleration is smaller by using the bio-inspired guidance law than by using the proportional guidance law. That is to say, the bio-inspired guidance law just uses the information of the target from the imaging seeker,but the performance of it can be better than that of the proportional guidance law.     

UHMWPE/PCH复合材料性能研究

采用超高分子量聚乙烯(UHMWPE)纤维作增强材料,结构与UHMWPE纤维相似、且对纤维表面具有良好润湿性的全碳氢树脂(PCH)作基体,通过热压成型工艺制备UHMWPE/PCH复合材料,并通过扫描电镜、介电谱仪等方法对复合材料的力学性能、介电性能、吸水、湿热性能及界面粘接性能进行表征.结果表明,UHMwPE/PCH复合材料力学性能良好、介电性能优异、吸水率小、吸湿率低、粘接性能好.     

The Lunar Gravity Ranging System for the Gravity Recovery and Interior Laboratory (GRAIL) Mission

The Lunar Gravity Ranging System (LGRS) flying on NASA’s Gravity Recovery and Interior Laboratory (GRAIL) mission measures fluctuations in the separation between the two GRAIL orbiters with sensitivity below 0.6 microns/Hz^1/2. GRAIL adapts the mission design and instrumentation from the Gravity Recovery and Climate Experiment (GRACE) to a make a precise gravitational map of Earth’s Moon. Phase measurements of Ka-band carrier signals transmitted between spacecraft with line-of-sight separations between 50 km to 225 km provide the primary observable. Measurements of time offsets between the orbiters, frequency calibrations, and precise orbit determination provided by the Global Positioning System on GRACE are replaced by an S-band time-transfer cross link and Deep Space Network Doppler tracking of an X-band radioscience beacon and the spacecraft telecommunications link. Lack of an atmosphere at the Moon allows use of a single-frequency link and elimination of the accelerometer compared to the GRACE instrumentation. This paper describes the implementation, testing and performance of the instrument complement flown on the two GRAIL orbiters.     

90°强曲率弯管内三维湍流流场的数值分析

本文根据作者发展的一种能计算任意截面形状 90°弯管内三维不可压缩湍流流场的分析方法,利用作者实验的圆截面弯管数据 ( R_c/D=0.87)检验 k- ε双方程湍流模型预示强曲率三维湍流流场的精度。计算了 R_c/D=2.3的矩形截面和 R_c/D=0.87的圆截面 90°弯管,并将计算结果与相应实验数据进行了比较分析。结果表明,即使对曲率很强的弯管,吸力面 (内侧壁 )不出现二次流迁移所形成的低速区前,标准 k- ε双方程模型仍能较好地预示出平均速度场。      

特征结构配置在飞机模态解耦中的应用

主要对特征结构配置在飞机模态解耦中的应用问题进行研究,并以某飞机横航向小扰动运动为例,按照飞机飞行品质规范要求,给出荷兰滚模态和滚转模态解耦控制的设计方法。     

测量旋涡脱落频率的实验研究

本文提出了一种由表面摩擦测量旋涡脱落频率的方法,阐述了其原理,给出了实验研究的结果,可作为涡街式流量计测量旋涡脱落频率的一种途径。     

低RCS飞行器外形设计实践

 在鸭式布局的基础上 ,对飞行器各部件及部件间的连接方式进行了外形隐身设计。对初步形成的鸭翼 -翼身融合体改变机身头部形状和立尾配置等进行 RCS优化。给出了飞行器各种状态下的 RCS平均值和迎头± 45°区内的 RCS值。测试结果表明 ,尖头机身、 30°双立尾 (立尾与垂直平面成± 30°角 )的鸭翼 -翼身融合体的 RCS值最小。对 RCS优化后的外形 ,风洞测力试验表明其气动性能也较好 (最大升阻比达到 8,失速迎角超过 2 6°)     

绕圆头回转体通气空化流型的实验研究

为了深入了解通气空化流动现象,利用高速全流场显示技术,对绕圆头回转体通气空化流型进行实验研究。结果表明,重力效应和通气量对通气空化的多相流流型起主要作用。定义了弗洛德数和通气率两个无量纲数,将绕圆头回转体通气空化分为5种多相流流型,即透明空泡、透明气弹、透明分层、水气混合以及半透明水气混合。流动参数对流型的影响分为2个阶段,即重力起主要作用阶段和重力效应不明显阶段。在重力起主要作用阶段,通气率一定时,随着弗洛德数的增大,附着弹体的空泡倾斜程度变小,弹体上表面的断裂空泡转变为贴着弹体壁面的稳定空泡;弗洛德数一定时,随着通气率的增大弹体上表面断裂空泡的尺度不断增大。在重力效应不明显阶段,通气率一定时,随着弗洛德数的增大,雷诺数变大,流场的湍流强度增大,空泡尾流区域水气交换的程度加剧;弗洛德数一定时,随着通气率的增大,通气空化数减小,绕弹体的云雾状空泡逐渐转变为透明空泡。最后,进一步分析了重力影响下透明空泡脱落的非定常过程,以及反向射流作用下云雾状空泡交替脱落的非定常过程。