谐振式光纤陀螺系统建模及其应用研究

谐振式光纤陀螺作为高精度角速度传感器,以其集成化高、成本低以及抗干扰性强等独有优势,逐渐成为下一代光学陀螺研究发展的热点。通过对谐振式光纤陀螺工作原理的分析,建立了陀螺数字信号处理系统可视化模型,并对系统谐振曲线和同步解调曲线等开环输出以及锁频反馈下闭环输出进行了模拟仿真。利用仿真模型分析了正弦波调制下谐振谱分裂现象,并搭建实验装置对其进行了验证。结果表明,实验中正弦信号调制频率高于系统谐振输出半高全宽一半,即对应2 MHz时,谐振谱分裂会导致同步解调输出线性区域出现明显失真,严重恶化了标度因数线性度。因此,搭建的谐振式光纤陀螺仿真模型能够准确而有效地模拟系统的工作状态,在系统噪声抑制和精度提升方面具有指导性意义。     

Torque Distribution of Electric Vehicle with Four In-Wheel Motors Based on Road Adhesion Margin

With the worsening of energy crisis and environmental pollution,electric vehicles with four in?wheel motors have been paid more and more attention. The main research subject is how to reasonably distribute the driving torque of each wheel. Considering the longitudinal motion,lateral motion,yaw movement and rotation of the four wheels,the tire model and the seven DOF dynamic model of the vehicle are established in this paper. Then,the torque distribution method is proposed based on road adhesion margin,which can be divided into anti ? slip control layer and torque distribution layer. The anti?slip control layer is built based on sliding mode variable structure control,whose main function is to avoid the excessive slip of wheels caused by road conditions. The torque distribution layer is responsible for selecting the torque distribution method based on road adhesion margin. The simulation results show that the proposed torque distribution method can ensure the vehicle quickly adapt to current road adhesion conditions,and improve the handling stability and dynamic performance of the vehicle in the driving process.     

高精度盘式永磁电机温度分析与研究

以高精度无槽盘式永磁电机为研究对象,建立了电机三维电磁仿真模型。详细分析了该电机反电动势和转矩特性,避免由高次谐波引起的定、转子及永磁体涡流损耗,有效改善了电机的热性能,为进一步研究打下基础。建立了三维温度场仿真模型,分析了热源分布和传热过程,计算了电机在自然散热条件下温度的稳态分布。最后通过电机温升试验,验证了理论分析的正确性与合理性。     

Dynamics and de-spin control of massive target by single tethered space tug

This paper investigates the dynamics and de-spin control of a massive target by a single tethered space tug in the post-capture phase. The dynamic model of the tethered system is derived and simplified to a dimensionless form. Further, a decoupled PD controller is proposed, and the local stability of the controller is analyzed by linearization technique. Parametric studies of the dynamics and de-spin control of a massive target are conducted to characterize the dynamic process of de-spin with the proposed control law. It is shown that the massive target can be de-span by a single and small space tug with limited thrust within finite time. The thrust tangent with the tether de-spins the target while the thrust normal to the tether prevents the tether from winding up the target. The tether length has a positive contribution to the de-spin of a target. The longer tether leads to a faster de-spin process.     

激光熔化沉积Ti-6Al-2Zr-Mo-V钛合金组织特征研究

采用激光熔化沉积快速制造工艺直接成形Ti-6Al-2Zr—Mo—V合金板材。激光熔化沉积过程中合金粉末充分熔化并在液态均匀混合以得到成分均匀、全致密的组织。SEM分析表明,激光沉积Ti-6Al-2Zr-Mo—V合金具有均匀细小的α／β双相片层组织,且片层取向随机多样,分布均匀。其组织特点与激光沉积过程中的快速凝固和固态相变有关。解释了其特征组织的形成机理,并讨论了其沉积层组织特征对性能的影响。     

基于鲁棒变结构控制方法的非线性导弹自动驾驶仪设计

对一类非线性不确定导弹控制系统,采用自适应方法进行了基于滑模理论的变结构控制器设计。该方案使得采用反演手段产生的微分爆炸问题得到较好的回避,同时构造自适应律,消除了不确定性对系统的影响,最后通过构造Lyapunov函数方法,确保了系统的鲁棒稳定性。文末仿真结果表明了该方案的有效性。     

模式识别中幂变换正态性的研究

在基于模板匹配的模式识别中,当数据呈正态分布时得到的识别效果最优。幂变换是一种将非正态分布转换为正态分布的一种有效方法,文中对幂变换技术的正态性问题进行了相关的研究,并探讨了典型分布条件下的幂变换最佳取值问题,为幂变换的应用提供了一定的理论基础。     

一种小波变换像空间的再生核

利用一个常用的调制高斯函数作为小波母函数,得到小波变换像空间的再生核函数的具体表达式和小波变换的等距恒等式,并分析了小波变换像空间的结构,为一般的小波变换的像空间的研究提供了理论基础。     

微型燃气轮机乙醇燃烧室点火与熄火试验

对应用于微型燃气轮机上的可再生生物质燃料乙醇燃烧室开展了试验研究,包括4种不同的供油方式,获得了常温常压进口条件下乙醇燃烧室的点火与熄火特性.研究结果表明:常温常压下采用旋流器的乙醇燃烧室的贫油点火和贫油熄火当量比的值均随空气流量的增加而减小,其点火与熄火性能优于预蒸发预混管燃烧室.      

爆震管壁面热负荷实验

在一台内径61 mm、长度1140 mm的气动阀式脉冲爆震发动机(PDE)上,进行了爆震管热负荷的测量计算,主要采用了两种换热模型:一是自然对流和热辐射模型;二是强迫对流模型.在两种方式下,爆震管的热负荷随频率的变化关系基本相同,即随频率升高而热负荷增大,但频率增加两倍热负荷增加却不止两倍.此外,在方式二的情况下,还得到煤油蒸发率随频率的变化关系,为PDE蒸发器设计提供参考.