通信拓扑切换下的多飞行器协同拦截方法

针对通信拓扑切换条件下的多飞行器协同拦截问题,提出了一种基于扩张状态观测器的协同制导方法。建立协同制导设计模型,将协同拦截问题转换为视线稳定条件下的剩余飞行时间调节问题。为解决机动目标状态不确定的问题,将目标的状态视作扰动,设计扩张状态观测器来估计机动目标的状态,并在制导律中对目标的机动进行补偿。利用有限时间一致性理论进行一致性控制协议的设计,实现各飞行器剩余飞行时间的有限时间一致,并利用Lyapunov稳定性理论分析通信拓扑切换情况下闭环系统的有限时间稳定性,给出了系统一致收敛时间。仿真结果表明,在通信拓扑变换的情况下,设计的观测器能够有效估计目标状态,且协同制导律能够满足对剩余飞行时间的控制要求,进而实现协同拦截。     

永磁同步电机驱动太阳翼扰动力矩建模与仿真

建立太阳翼驱动机构(SADA)永磁同步电机的电磁方程,并利用固定界面模态综合法建立SADA驱动太阳翼耦合系统的振动方程;设计模拟柔性负载,对SADA驱动该柔性负载的扰振力矩进行仿真分析。结果表明,SADA驱动柔性负载运行过程中所产生扰振力矩主要由两个原因引起：1)电流噪声引起的力矩波动;2)控制参数选取不当引起的转角波动。     

质量矩导弹固定时间二阶滑模控制方法

针对三轴稳定的双滑块质量矩导弹,基于动态系统零点配置原理提出一种快速固定时间二阶滑模控制方法。首先建立具有完整耦合动力学特征的质量矩导弹姿态动力学模型;其次,基于典型动态系统进行零点配置原理分析和收敛时间估计;在此基础上,提出动态过程可调节的固定时间二阶滑模控制方法,并对系统收敛时间的上界进行估计;最后,针对质量矩导弹的仿真校验了设计方法的有效性。     

调频连续波合成孔径雷达滑动聚束成像算法

调频连续波(FMCW)体制下,传统脉冲合成孔径雷达(SAR)的"走—停"回波模型已经不再适用,快时间走动项引入的距离-方位耦合项不可以忽略,否则会使图像质量的降低。该文首先构建FMCW回波模型,其次,提出了一种基于两步式的滑动聚束SAR成像算法。所提算法针对滑动聚束模式中,多普勒历程大于脉冲重复频率(PRF)所造成的频谱混叠问题,采用方位频域去斜的预处理加以解决。由于距离徙动校正(RCMC)后方位时域依旧混叠,该算法通过方位去斜在频域完成聚焦避免再一次的解混叠操作。通过仿真验证,该算法能够实现高精度的FMCW SAR滑动聚束成像。     

战术导弹中小型固体发动机技术的发展

通过对战术导弹中小型固体发动机具体发展需求的分析,明确了高能化、轻质化、可控化和低易损4个主要的中小型固体发动机发展方向。可以从提高推进剂黏合剂密度和燃烧室工作压强来实现高能化;采用轻质高性能金属壳体、纤维缠绕复合材料壳体以及提高绝热层性能以实现轻质化;可控化需要在高功率密度的驱动装置、高精度的控制算法等方面获得突破和支撑;低易损则可以从钝感推进剂、主动扩稳、防护材料等途径开展工作。通过对这4个技术方向上国内外研究现状和发展趋势进行梳理,明确提出未来研究需要突破推进剂和热防护原材料、新型装药工艺、可调燃气阀门、压力闭环控制和有效扩稳等关键技术,加速工程化进程,为我国战术导弹的跨越式发展提供支撑。     

二维复值Ginzburg-Landau方程的一个高阶紧致ADI差分格式

对二维复值金兹堡朗道(Ginzburg-Landau,GL)方程提出一个基于时间分裂的高阶紧致交替方向隐式有限差分格式。本文通过时间分裂法将GL方程分裂成一个非线性子问题及两个线性子问题,对非线性子问题以及其中一个线性子问题均通过精确积分进行计算,并对另一线性子问题构造紧致交替方向隐式差分格式进行数值计算。实际计算中,在每一时间步,利用追赶法求解一族常系数三对角线性代数方程组,从而使得算法既具有较高精度又拥有较快的计算速度。数值实验表明该算法在时间和空间方向分别具有二阶和四阶精度,并模拟了方程的一些动力学行为。     

基于ICKF的永磁同步电机无传感器控制方法

针对在永磁同步电机(Permanent magnet synchronous motor,PMSM)中安装传感器带来的高成本、体积增大、可靠性降低和易受环境干扰等问题,提出采用迭代容积卡尔曼滤波(Iterative cubature Kalman filter,ICKF)算法来估计电机转速和转子位置,并将其应用于永磁同步电机无传感器控制。首先,建立了PMSM在α-β坐标系下的离散数学模型。其次,在Matlab/Simulink环境下分别建立了基于容积卡尔曼滤波(Cubature Kalman filter,CKF)和ICKF的PMSM转速、电流双闭环的无传感器矢量控制系统仿真模型,并进行了给定转速和加负载两种工况的仿真验证。最后,基于TMS320F28335芯片搭建了硬件实验验证平台。仿真分析与实验结果均表明,迭代容积卡尔曼滤波算法应用于永磁同步电机无传感器控制中抗负载变化干扰性好、电机运行稳定、电机转速和转子位置估计精度高,可满足对电机精确控制要求较高的应用场合,具有重要参考价值和推广意义。     

Torque Distribution of Electric Vehicle with Four In-Wheel Motors Based on Road Adhesion Margin

With the worsening of energy crisis and environmental pollution,electric vehicles with four in?wheel motors have been paid more and more attention. The main research subject is how to reasonably distribute the driving torque of each wheel. Considering the longitudinal motion,lateral motion,yaw movement and rotation of the four wheels,the tire model and the seven DOF dynamic model of the vehicle are established in this paper. Then,the torque distribution method is proposed based on road adhesion margin,which can be divided into anti ? slip control layer and torque distribution layer. The anti?slip control layer is built based on sliding mode variable structure control,whose main function is to avoid the excessive slip of wheels caused by road conditions. The torque distribution layer is responsible for selecting the torque distribution method based on road adhesion margin. The simulation results show that the proposed torque distribution method can ensure the vehicle quickly adapt to current road adhesion conditions,and improve the handling stability and dynamic performance of the vehicle in the driving process.     

Rotation Control of a 3-DOF Parallel Mechanism Driven by Pneumatic Muscle Actuators

The pneumatic muscle actuator(PMA) has many advantages,such as good flexibility,high power/weight ratio,but its nonlinearity makes it difficult to build a static mathematical model with high precision. A new method is proposed to establish the model of PMA. The concept of hybrid elastic modulus which is related to the static characteristic of PMA is put forward,and the energy conservation law is used to achieve the expression of the hybrid elastic modulus,which can be fitted out based on experimental data,and the model of PMA can be derived from this expression. At the same time,a 3-DOF parallel mechanism(a new bionic shoulder joint)driven by five PMAs is designed. This bionic shoulder joint adopts the structure of two antagonistic PMAs actualizing a rotation control and three PMAs controlling another two rotations to get better rotation characteristics. The kinematic and dynamic characteristics of the mechanism are analyzed and a new static model of PMA is used to control it.Experimental results demonstrate the effectiveness of this new static model.     

Active Design Method of Tooth Profiles for Cycloid Drive Based on Meshing Efficiency

An active design method of tooth profiles for cycloid gears based on their meshing efficiency is proposed.This method takes the meshing efficiency as one of the design variables to determine the tooth profiles. The calculation method for the meshing efficiency of planetary transmission is analyzed and the equation of the meshing efficiency is deduced. Relationships between the meshing efficiency,the radius of the pin wheel and the eccentric distance are revealed. The design constraint quations and the strength constraint quations are deduced. On the basis of this,a design procedure is laid out. Some examples using different input parameters are conducted to demonstrate the feasibility of the approach. A dynamic simulation of the rigid-flexible coupling of cycloid gears is also presented. The results show that the proposed design method is more flexible to control the tooth profiles by changing the input values of the transmission efficiency.