Long-term operation of "Orlan" space suits in the "Mir" orbiting station: experience obtained and its application

The started assembly of the International Space Station (ISS) and its further operation will call for a great number of extravehicular activity sorties (EVA) to be performed by ISS crews. Therefore, of great importance is to make use of the EVA experience gained by cosmonauts in the process of 15-year operation of the Mir orbiting station (OS). Over the 15-year period, Mir crewmembers wearing Orlan type semi-rigid space suits have accumulated 158 man/sorties from the orbiting station. Crewmembers used 15 suits in orbit and some of the suits were in operation for more than 3 years. The paper presents principal design features, which provide effective and safe operation of orbit-based suits, and briefly describes procedures for preparation and maintenance of suit systems, which ensure long-term operation of space suit in orbit. The paper gives results of the space suit modifications, presents suit performance characteristics and lists novel or upgraded components of the space suit and its systems. The paper also summarizes improvements in the Orlan type suits described in some earlier publications. They refer, in the first run, to the improvement of space suit operations characteristics and reliability, and the utilization of the Orlan type space suit in the ISS program. The paper analyses the experience gained and drawbacks detected and observations made, and gives statistical data on long-term space suit operations aboard the Mir station. The paper reviews certain problems in the process of EVAs performed from the station, and describes the ways of their solution as applied to the further utilization of the suit within the ISS program.     

The Genesis Solar Wind Concentrator Target: Mass Fractionation Characterised by Neon Isotopes

The concentrator on Genesis provided samples of increased fluences of solar wind ions for precise determination of the oxygen isotopic composition. The concentration process caused mass fractionation as a function of the radial target position. This fractionation was measured using Ne released by UV laser ablation and compared with modelled Ne data, obtained from ion-trajectory simulations. Measured data show that the concentrator performed as expected and indicate a radially symmetric concentration process. Measured concentration factors are up to ∼30 at the target centre. The total range of isotopic fractionation along the target radius is 3.8%/amu, with monotonically decreasing ²⁰Ne/²²Ne towards the centre, which differs from model predictions. We discuss potential reasons and propose future attempts to overcome these disagreements.     

The Grain Impact Analyser and Dust Accumulator (GIADA) Experiment for the Rosetta Mission: Design, Performances and First Results

The Grain Impact Analyser and Dust Accumulator (GIADA) onboard the ROSETTA mission to comet 67P/Churyumov–Gerasimenko is devoted to study the cometary dust environment. Thanks to the rendezvous configuration of the mission, GIADA will be plunged in the dust environment of the coma and will be able to explore dust flux evolution and grain dynamic properties with position and time. This will represent a unique opportunity to perform measurements on key parameters that no ground-based observation or fly-by mission is able to obtain and that no tail or coma model elaborated so far has been able to properly simulate. The coma and nucleus properties shall be, then, clarified with consequent improvement of models describing inner and outer coma evolution, but also of models about nucleus emission during different phases of its evolution. GIADA shall be capable to measure mass/size of single particles larger than about 15 μm together with momentum in the range 6.5 × 10⁻¹⁰ ÷ 4.0 × 10⁻⁴ kg m s⁻¹ for velocities up to about 300 m s⁻¹. For micron/submicron particles the cumulative mass shall be detected with sensitivity 10⁻¹⁰ g. These performances are suitable to provide a statistically relevant set of data about dust physical and dynamic properties in the dust environment expected for the target comet 67P/Churyumov–Gerasimenko. Pre-flight measurements and post-launch checkouts demonstrate that GIADA is behaving as expected according to the design specifications. The International GIADA Consortium (I, E, UK, F, D, USA).     

The Detection Performance of the Siebert and Dicke-Fix CFAR Radar Detectors

The Siebert and the Dicke-fix CFAR radar detectors, used to maintain a constant false alarm rate (CFAR) in radar receivers under very similar circumstances, are considered. The Siebert detector represents the maximum-likelihood detection procedure for a signal in Gaussian noise of unknown power level, whereas the Dicke-fix makes use of a bandpass limiter to normalize the input and thus ensure a constant false alarm rate. The detection performance of the two detectors is determined and a comparison shows that over a wide range of parameters, the Dicke-fix introduces a loss which is approximately 1 B larger than for the Siebert detector.     

Algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter

The algorithmic support of a small-sized navigation system on the basis of the magnetoinertial course transmitter is considered; the support makes it possible to significantly reduce accumulating errors that are due to incomplete data on wind parameters and decrease requirements for random errors of initial data sensors.     

Remote data sensing using SAR and harmonic reradiators

In sensor networks distributed over large areas, communication by means of active transmitters on sensor nodes is inherently energy expensive and poses a significant bottleneck to achieve a long battery life. We propose modulated reradiation of radar illumination as a means to transmit information from a group of sensors to an airborne radar. This puts the communications energy burden on the radar transmitter rather than on the sensor nodes, thus increasing their battery lifetimes. To distinguish the sensor return from the clutter return, the modulation on the sensors is done by switching a nonlinear load on the sensor antenna and processing the harmonic reradiation. We present techniques to transmit information from the sensors, which use stripmap mode synthetic aperture radar (SAR) ideas to decode the information and to simultaneously obtain a geographic map of the sensor locations.     

Evolution of the sun''s near-surface asphericities over the activity cycle

Solar oscillations provide the most accurate measures of cycle dependent changes in the sun, and the Solar and Heliospheric Observatory/Michelson Doppler Imager (MDI) data are the most precise of all. They give us the opportunity to address the real challenge — connecting the MDI seismic measures to observed characteristics of the dynamic sun. From inversions of the evolving MDI data, one expects to determine the nature of the evolution, through the solar cycle, of the layers just beneath the sun's surface. Such inversions require one to guess the form of the causal perturbation — usually beginning with asking whether it is thermal or magnetic. Matters here are complicated because the inversion kernels for these two are quite similar, which means that we don't have much chance of disentangling them by inversion. However, since the perturbation lies very close to the solar surface, one can use synoptic data as an outer boundary condition to fix the choice. It turns out that magnetic and thermal synoptic signals are also quite similar. Thus, the most precise measure of the surface is required.

We argue that the most precise synoptic data come from the Big Bear Solar Observatory (BBSO) Solar Disk Photometer (SDP). A preliminary analysis of these data implies a magnetic origin of the cycle-dependent sub-surface perturbation. However, we still need to do a more careful removal of the facular signal to determine the true thermal signal.