Low-energy ion fluxes and magnetic field on the inner boundary of the heliosphere

A comparison of temporal profiles of low-energy ion intensity and magnetic field magnitude in different periods of solar activity in the outer heliosphere is carried out using the data of the Voyager 1 and Voyager 2 spacecraft. It is shown that temporal, spectral, and statistical characteristics of particle fluxes and magnetic field in the heliospheric regions before and after the terminal shock in 2002–2008 had similar dynamics in different hemispheres. This similarity allowed one to assume that, in the region of the inner heliospheric boundary, a quasistable spatial structure existed moving together with the terminal shock in accordance with the solar wind pressure, as well as, probably, under the action of the interstellar medium. It was revealed that the spatial dimensions of most details of this structure are less on Voyager 2, which, probably, is due to variation of the solar activity level, difference in latitude of spacecraft disposition, and also the influence of the interstellar magnetic field.     

On synthesizing the informative functions of hazard at helicopter’s critical flight conditions

In this paper, we consider some typical values of motion parameters in exceptional situations when approaching to the helicopter critical flight regimes and present a technique for constructing the partial and integral informative functions of hazards at current flight regimes. Also described are the possibilities of their use for solving the problems of warning, informative crew support, and synthesizing the control algorithms to remove helicopter from the exceptional situation occurred.     

Clouds and Earth Radiant Energy System (CERES), a review: Past,present and future

The Clouds and Earth Radiant Energy System (CERES) project’s objectives are to measure the reflected solar radiance (shortwave) and Earth-emitted (longwave) radiances and from these measurements to compute the shortwave and longwave radiation fluxes at the top of the atmosphere (TOA) and the surface and radiation divergence within the atmosphere. The fluxes at TOA are to be retrieved to an accuracy of 2%. Improved bidirectional reflectance distribution functions (BRDFs) have been developed to compute the fluxes at TOA from the measured radiances with errors reduced from ERBE by a factor of two or more. Instruments aboard the Terra and Aqua spacecraft provide sampling at four local times. In order to further reduce temporal sampling errors, data are used from the geostationary meteorological satellites to account for changes of scenes between observations by the CERES radiometers.     

Determination of station positions and velocities from laser ranging observations to Ajisai,Starlette and Stella satellites

The positions and velocities of the four Satellite Laser Ranging (SLR) stations: Yarragadee (7090), Greenbelt (7105), Graz (7839) and Herstmonceux (7840) from 5-year (2001–2005) SLR data of low orbiting satellites (LEO): Ajisai, Starlette and Stella were determined. The orbits of these satellites were computed from the data provided by 20 SLR stations. All orbital computations were performed by means of NASA Goddard’s GEODYN-II program. The geocentric coordinates were transformed to the topocentric North–South, East–West and Vertical components in reference to ITRF2005. The influence of the number of normal points per orbital arc and the empirical acceleration coefficients on the quality of station coordinates was studied. To get standard deviation of the coordinates determination lower than 1 cm, the number of the normal points per site had to be greater than 50. The computed positions and velocities were compared to those derived from LAGEOS-1/LAGEOS-2 data. Three parameters were used for this comparison: station coordinates stability, differences from ITRF2005 positions and velocities. The stability of coordinates of LEO satellites is significantly worse (17.8 mm) than those of LAGEOS (7.6 mm), the better results are for Ajisai (15.4 mm) than for Starlette/Stella (20.4 mm). The difference in positions between the computed values and ITRF2005 were little bit worse for Starlette/Stella (6.6 mm) than for LAGEOS (4.6 mm), the results for Ajisai were five times worse (29.7 mm) probably due to center of mass correction of this satellite. The station velocities with some exceptions were on the same level (≈1 mm/year) for all satellites. The results presented in this work show that results from Starlette/Stella are better than those from Ajisai for station coordinates determination. We can applied the data from LEO satellites, especially Starlette and Stella for determination of the SLR station coordinates but with two times lower accuracy than when using LAGEOS data.     

Telemetry,telecommand and safety sub-systems for scientific ballooning from Hyderabad

Highly sophisticated balloon-borne scientific payloads have stringent requirement on the telemetry and command system. The development and fabrication of the on-board TT&C package for telemetry, tracking, command, safety and ranging for these experiments is done in-house at the National Balloon Facility (NBF) at Hyderabad. In the last few years, we have made major improvements both in the ground station and the on-board sub-systems, thereby improving the data quality, data handling speed and the general flight control along with aviation safety. The new system has telemetry data rate up to 1 Mbps. A reduction in weight, power and cost of the reengineered on-board integrated package has also lead to the ease of operation during field tests prior to launch and at remote recovery sites. In this paper, we describe the details of the new control package, its flight performance and our plans for portable S-band telemetry and telecommand system to cater to the balloon flights from Antarctic station and long duration balloon flights.     

A technique for presentation and application of the propeller fan multidimensional characteristics in semi-full-scale simulation of a gas turbine engine and its automatic control system

A technique for linear interpolation of the multidimensional characteristics of a coaxial propeller fan with opposite rotation propellers is proposed; the technique makes it possible to simulate the turbofan engine operation in the entire range of flight conditions and reduce expenses for fullscale tests. The mathematical models obtained meet the requirements imposed in the semi-full-scale simulation.     

Fast Probabilistic Particle Identification algorithm using silicon strip detectors

Active detectors used as radiation monitors in space are not usually able to perform Particle Identification (PID). Common techniques need energy loss spectra with high statistics to estimate ion abundances. The ALTEA-space detector system is a set of silicon strip particle telescopes monitoring the radiation environment on board the International Space Station since July 2006 with real-time telemetry capabilities. Its large geometrical factor due to the concurrent use of six detectors permits the acquisition of good energy loss spectra even in a short period of observation. In this paper we present a novel Fast Probabilistic Particle Identification (FPPI) algorithm developed for the ALTEA data analysis in order to perform nuclear identification with low statistics and, with some limitations, also in real time.     

Thermostressed state in turbine rotor blades with thermal barrier coating at transient conditions of air breathing jet engine operation

The finite-difference method acceptable for on-board computers is applied to analyze the thermo-stressed state for the thermal-barrier coating of a perforated turbine blade and its wall at transient and stationary conditions of air-breathing jet engine operation during a flight.     

Investigation of the motion of (99942) apophis asteroid using the SKIF cyberia multiprocessor computing system

We present the results of investigation of the dynamics of (99942) Apophis asteroid, which will undergo a very close encounter with the Earth on April 13, 2029. The region of possible motions of the asteroid is considered on the time interval (2004, 2040). In addition, it is shown that an increase of the observational interval (2004, 2006) until 2008 allowed us to reduce significantly the area of possible motions. All investigations were performed by numerical methods with the help of algorithms and software developed by us in the environment of parallel programming using the SKIF Cyberia multiprocessor computer of the Tomsk State University.     

Analysis of nonstationary heating and cooling of a thermomagnetic engine gadolinium working element

The paper presents the results of calculating nonstatitionary heat exchange between a heattransfer agent (water) and a gadolinium working element of the thermomagnetic engine with the use of ANSYS 13.0 certified software. Recommendations for designing the thermomagnetic engine working elements are given based on the analysis of calculation results.