Three-dimensional numerical studies of a jet airflow around the duct platforms of the turbine nozzle clusters

This paper presents the results of three-dimensional numerical studies of hydrodynamics and heat exchange on the models of flat plates in the jet airflow. These results are compared with the experimental data. A three-dimensional model for determining the thermal condition of the nozzle clusters in the conjugated formulation is proposed. Also presented are the data on optimization of the system used for the jet airflow around the duct platforms of the nozzle clusters.     

Local fracture of the burning solid propellant

The problem of fracture mechanics for the solid propellant deteriorated by a crack-shaped cavity, the surface of which burns is considered. It is assumed that the propellant reagents are uniformly distributed in the solid phase while the combustion products are gaseous. The sufficient condition for the “combustion -fracture” stability regime is obtained.     

Gasodynamic characteristics of a combustion chamber in the integrated power plant with an asymmetric air intake

The results of experimental investigations of gasodynamic characteristics of a combustion chamber model in the integrated power plant (IPP) with an asymmetric air intake are presented. The influence of an angle of air supply into the chamber model on hydraulic losses and the flow structure is shown at different air flowrates, relative values of the minimal flow section area of the feeding air intake pipes, under changes of the flowrate of gas simulating gas generation products and geometric model parameters. A technique for measuring the concentration of carbon dioxide simulating IPP gas generation products in the combustion chamber air flow and the results of experimental investigations of a mixture formation process in the combustion chamber model are described.     

The conundrum of software estimation models

There are many sophisticated models and methods for estimating the size, cost, and schedule of software projects. However, the ability to accurately estimate software cost, size, or schedule is still dubious. In general, the predictive accuracy of models for estimating software development cost and schedule has not been shown to be better than “within 25 percent of actual cost or schedule, about one half of the time”, especially for Department of Defense software efforts. The same is true for software size estimating models and methods, although there are some studies that have shown superior results. For software support (or maintenance) cost estimation, no model has been demonstrated to be accurate. This paper presents a summary of efforts performed to date which demonstrate the accuracy (or lack thereof) of software models. The results of several studies in the areas of software development cost and schedule estimation, size estimation, and support cost estimation are presented to show what these models can and cannot do. Some ideas for improvement are also presented, including the results of some studies which may lead to a resolution of the accuracy conundrum which currently exists     

Intranet的不安全性分析及解决不安全问题的技术探讨

分析了Intranet中的不安全性 ,根据具体的实践体会从WindowsNT、SQLServer及动态网页脚本语言ASP等方面论述了与安全因素有关的技术漏洞 ,给出了克服不安全问题的技术并进行了探讨。     

Embedded information system re-engineering

Currently fielded embedded information systems face readiness challenges imposed by evolving missions and extended service lifespans. The ability to overcome these challenges is constrained by such factors as shrinking budgets, limited computational capacity and diminished manufacturing sources effects that impact both hardware and software options. Wholesale redevelopment is often cost prohibitive, particularly since large portions of embedded applications continue to fulfil mission requirements. Solutions must preserve prior investments while providing efficient pathways for continued technology refresh. A technology solution for affordable modernization of legacy system software is being development. The Embedded Information System Re-engineering (EISR) project is developing an automation-assisted JOVIAL-to-C re-engineering capability that permits simultaneous modernization of both the structure and source language of legacy embedded applications. Engineers will be able to apply the proven labor-saving visualization and analysis features of modern CASE tools to legacy JOVIAL applications. EISR will thus allow the DoD to recapture previous investments in proven legacy algorithms and mission capabilities while permitting the full exploitation of COTS economies of scale. This paper describes in brief the goals and objectives of the EISR project, and provides the current status of the EISR capability.     

Markets and Models for Large-Scale Courseware Development

Computer-aided instruction (CAI) has not achieved widespread use, even though experimental results have been promising, because of a complex of technical, economic, and social factors. The problems these factors produce might be overcome if a major ?market success? could be achieved with CAI systems. One potentially high-volume market, having probably a lower resistance to profound innovation than other sectors of education, is the junior college. To achieve a market success which would catalyze public and private investment to sustain the growth and dissemination of CAI requires technical solutions in the areas of hardware, software, and courseware. Courseware is a term designating the applications programs for CAI systems and associated textual, audio-visual, and other materials of instruction. Two different approaches to the production of courseware and their underlying philosophies are discussed and contrasted. The extent to which these different models of courseware design and development might lead toward the goal of mass dissemination is highlighted.     

天宫一号频繁轨控条件下快速测定轨精度及策略分析

2016年,中国将要执行空间站与货运飞船的快速交会对接试验,该试验要求飞船起飞后6 h完成与空间站的交会对接。工程实践中需要对飞船进行多次远导控制,其间留给快速定轨的数据时长最少可能只有5 min,这对短弧定轨精度提出了较高要求。利用天宫一号在轨运行期间实测数据开展了快速测定轨试验,试验频繁轨控条件下5 min数据时长的快速测定轨精度。试验结果表明,不同条件下短弧定轨精度差异较大,这为快速交会对接试验带来了较大风险。为了提高短弧定轨精度,制定了利用轨控前后数据联合解算轨控从而增加定轨数据弧段的方法提高短弧定轨精度的定轨策略。分析结果表明,该定轨策略有效提高了短弧定轨精度,可满足快速交会对接试验轨道维持控制要求。     

Some regularities in the relationship of limb coronal mass ejections with eruptive prominences and post-eruptive arcades

A positive correlation is shown to exist between the angular sizes (in the sky plane) of eruptive prominences and/or post-eruptive arcades and coronal mass ejections (CMEs) associated with them. New regularities are found that characterize the relationship between the latitude of eruptive prominences (post-eruptive arcades) and the latitude position of CMEs associated with them in the field of view of a coronagraph. An interpretation of these regularities is given.